Search for European Projects

34 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Educational for Drone

Start date: Oct 15, 2016, End date: Oct 14, 2019,

The aim of eDrone proposal is to define a learning environment to deliver more opportunities to access new competences related to the use of drone technologies in professional activities. These new competences refer in particular to the use of advanced ICT solutions for the use of drones and of the data acquired through drones that may go a long way towards the goals and priorities in terms of opt ...
Read Project

 17

 FINISHED 
EU-PV-Trainer project fits in the Europe 2020 Strategy, Education and Training 2020, the Directive of the European Parliament and Council Directive (2009/28/EC) on the promotion of the use of energy from renewable sources, which requires all Member States to raise the EU's share of RES to 20% by 2020. A pre-project diagnosis has been performed within the partnership, which shows, inter alia, that ...
Read Project

 6

 FINISHED 
The conversion of conventional aquaculture farms in sustainable aquaculture farms help aquaculture businesses to achieve economic viability and competitiveness. Sustainable aquaculture is undoubtedly the management technique that has most contributed to support aquaculture businesses to adopt aqua-environmental measures for protection of the environment, natural resources and landscape.Aquaponics ...
Read Project

 4

 FINISHED 
MESMERISE will develop and test a High-resolution non-intrusive scanner up to TRL 5 able to automatically detect and identify both internal and external concealed commodities being entirely independent of human operator interpretation and training and based on two complementary technologies: ultra-low-dose Multispectral Xray transmission and Infrasonic interrogation. A novel x-ray detector, in add ...
Read Project

 11

 FINISHED 

European Education in Advanced Ship Design

Start date: Sep 1, 2015, End date: Feb 28, 2019,

Objective The objective of the European Education in Advanced Ship Design Erasmus Mundus Master programme is to provide a high education in Naval Architecture and Ship and Offshore Design.Course duration One and a half years (90 ECTS)Brief DescriptionThe European Education in Advanced Ship Design master programme corresponds directly to the needs of the European and Worldwide Marine Industry. The ...
Read Project

 6

 FINISHED 
The recent economic and deep political crisis in the South Mediteranian (SM) region show that access to higher education is NOT a sufficient prerequisite for economic stabilty and job creation. The mismatching between academic programmes and labour market has created a political and economic void where young, high educated people have difficult to build careers in the industrial sector.The SM Wel ...
Read Project

 17

 FINISHED 
BACKGROUNDGlobal competition has generated a need among all the enterprises, and especially SMEs, to adjust their strategies for their survival. There is a general belief that the future accelerated growth and sustainability of SMEs will largely depend on the use of appropriate technology and the acquisition and absorption of knowledge. Technology and the transfer of discoveries and knowledge to S ...
Read Project

 7

 FINISHED 

Student Profile for Enhancing Engineering Tutoring

Start date: Oct 1, 2016, End date: Sep 30, 2018,

This project goal emerges from the potential synergy among a) the huge amount of academic data actually existing at the academic departments of faculties and schools, and b) the maturity of data science in order to provide algorithms and tools to analyse and extract information from what is more commonly referred to Big Data. A rich picture can be extracted from this data if conveniently processe ...
Read Project

 6

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2016, End date: May 31, 2018,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 
The SENSES project goals are:1) To implement a new strategy of theater audience building by improving access to creative works and intensifying their live experience;2) To enhance the cultural and creative sector capacity to operate transnationally.The survey commissioned in 2013 to Eurobarometer on the behaviour concerning cultural participation and production has showed that access to theatre ha ...
Read Project

 5

 FINISHED 

[ EXPLAIN ] HOW TO TELL WHAT YOU KNOW WELL

Start date: Sep 1, 2014, End date: Aug 31, 2017,

...iulia (Italy) - En.A.I.P. (Ente Nazionale Acli Istruzione Professionale) Veneto (Italy) - Fast Track into Information Technology Ltd. (Ireland) - Berufsfoerderungsinstitut Oberoesterreich (Austria) - Universitatea Dunarea De Jos Din Galati (Romania) - Association Européenne pour la Formation Professionnelle AEFP / European Vocational Training Association (Belgium) - Folkuniversitetet, Stiftelsen k ...
Read Project

 7

 FINISHED 

Academy of International Techno Entrepreneurship

Start date: Mar 1, 2015, End date: Mar 1, 2017,

...multinational and different corporate structures which will be occurred by the attendance of Pamukkale University, IYPF - International Young Professional Foundation (Foundation), UNIVERSITATEA DUNAREA DE JOS DIN GALATI (University), European Alternatives (Association), IPEC – International Research Org. Project and Education Center Ltd. (Private Corporation) and The Silesian University of Technol ...
Read Project

 5

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2015, End date: Sep 30, 2016,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 
The SMARTYards project aims to improve the productivity of European small and medium sized shipyards and related subcontractors working with them by at least 20%. This will be achieved by improving knowledge and technological skills, needed to survive in a tough global competition and to provide innovative products. This is particularly important as the technology gap between larger and smaller E ...
Read Project

 20

 FINISHED 

Certified VET trainer in the construction sector

Start date: Sep 1, 2014, End date: Aug 31, 2016,

The EU construction industry with increasingly qualified workforce of 14.5 million (EUROSTAT 2009) exemplifies the significance and urgency of moving toward mutual recognition of qualifications. Case studies show that retraining is required for workers to convert to an occupation and to upskilling which enable a person to fulfil an occupation mainly through an add-on of knowledge. Erasmus+ program ...
Read Project

 5

 FINISHED 
Action! Film and Theatre as tools for exploring and developing Community Cohesion. A 7 day residential training course for youth workers, youth activists, community film and theatre practitioners and teachers held at the Eton Dorney Centre, Windsor. This is an experiential course in using theatre and film with young people to explore issues pertinent to their lives. The course will be delivered us ...
Read Project

 11

 FINISHED 
Materials and structures are called adaptive if they can change certain properties in a predictable manner due to the forces acting on them (passive) or by means of built in actuators (active). Those materials and structures are referred to as smart if they provide best performance when operation circumstances change. The project ADAM4EVE focuses on the development and assessment of applications o ...
Read Project

 24

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2014, End date: Sep 30, 2015,

University “Dunarea de Jos” of Galati had the following objectives regarding the Erasmus+ student mobility at the partner institutions: - to increase the level of knowledge accumulated by the students; - obtaining practical knowledge, abilities and competences - improving the general performance of students. Regarding the mobility of teaching staff, the following objectives have been considered: - ...
Read Project

 1

 FINISHED 
Be free to fly, Evergreen established friendships. There are some youth groups in every country dealing with the model plane technologies. Our purpose with this project is to arrange sharing the technological knowledge and experience about model plane technologies for the young people and merging the young people between 15 and 25 ages. Therefore, group studies for high school and university ...
Read Project

 3

 FINISHED 

Sanatla Gelen Dostluk. The art of friendship

Start date: Jan 1, 2015, End date: Jul 31, 2015,

The art of friendship. There are some youth groups in every country being interested in the cultural heritage and values. Our purpose with this project is to arrange sharing the knowledge and experience about cultural heritage for the young people and merging the young people between 15 and 28 ages. Therefore, group studies for high school and university students in the different countries an ...
Read Project

 3

 FINISHED 
"The general objectives of PROMISE are:PROMISE strives for multidimensional networking thus fostering integrationThe primary strategic objective of PROMISE is to improve and increase the integration, collaboration and knowledge transfer between the new member states, old member states (EU15) and candidate countries through a collaborative workplan of exchange of expertise and regional training and ...
Read Project

 21

 FINISHED 
In response to the call’s demand for cost effective modernization of the inland fleet for freight transport, MoVe IT! develops a suite of options for the modernisation of inland ships that meet the challenges of over-aging of the fleet, climate change and stronger environmental objectives and provides decision support regarding the application of these options. In this suite of options, knowledge ...
Read Project

 23

 FINISHED 

Printable Organic-Inorganic Transparent Semiconductor Devices (POINTS)

Start date: May 1, 2011, End date: Aug 31, 2014,

Europe is targeting a global leadership in the field of printed electronics (PE). This industry is expected to grow to a market size of 47 billion USD by 2018 (Figure 1) with a long-time potential of 300 billion USD by 2030 as estimated by IDTechEx [1,2,48]. The growth rates of the PE industry are expected to be comparable to those of silicon industry in past (inset of Figure 1). This is an ambiti ...
Read Project

 10

 FINISHED 
"The proposed Coordination and support actions (Coordinating, CSA) has the overall objective to disseminate state-of-the-art research results in food safety and quality topics through a series of symposia, expert working group meetings, an online platform with best practise examples and coordination of cooperation and a plan for the preparation of future activities. In addition to the aim of disse ...
Read Project

 36

 FINISHED 
"The goal of this project is to develop an advanced sensor system, that combines miniaturized Gas Chromatography (GC) as its key chemical separation tool, and Hollow-Fiber-based Infra Red Absorption Spectroscopy (HF-IRAS) as its key analytical tool to recognize and detect illicit drugs, key precursors and potential derivatives. The DIRAC sensor will be developed to: 1) be used on the field primari ...
Read Project

 12

 FINISHED 
The basic idea refers to the pursuit of the common trends in industrial evolution in the countries participating in the Project and the effect that development had on the cultural history in both national and international level. By means of this commoneffort we will highlight the essential common components of nations living in the area, search the effects on the social and economic development a ...
Read Project

 3

 FINISHED 
"Ge.M.IC will study “Cultural Interactions in a European Perspective” through a tripartite conceptual and methodological approach, whose aim will be to identify links between migration, gender and intercultural interaction, as it is in the meeting place of these three dimensions that some of the most important cultural developments in Europe take place. Ge.M.IC will approach these questions from a ...
Read Project

 8

 FINISHED 
The project aims at increasing the understanding (transparency) and encouraging the harmonization and normalization of EU-US food safety regulations. This will be accomplished by educating the regulators, educators, and students by tuning the food safety curricula for Bachelor of Science and include international case studies in lectures and tutorials. The examples will be drawn from the project a ...
Read Project

 4

 FINISHED 
The E-LERCO project is based on two negative and seemingly irreversible findings concerning open and distance learning schemes: their cost and the large number of students who drop out in the middle of the course. To overcome these two difficulties, the project aims to optimise the ratio of the costs committed and number of persons actually trained by considering cognitive ergonomics as a key fact ...
Read Project

 10

 FINISHED 
The SELF-EMPLOYMENT project aims at mapping and measuring the value of guidance and counselling services addressed at individuals considering self-employment. The project will initially undertake a survey on existing guidance and counselling services targeted at educated and experienced individuals wishing to set-up their own business. The survey will focus on the effectiveness of these services, ...
Read Project

 6

 FINISHED 
The KNOWLEDGE project will review European VET provision aimed at building inspectors (all professional levels) with the aim of identifying any differences in current VET provision and of highlighting any gaps in provision with regard to the needs of this professional group. Following an initial mapping of job performance regulations for building inspectors in the participating countries, the proj ...
Read Project

 5

 FINISHED 
Recognising the need for improved access and information concerning career counselling, the project will develop and test a prototype virtual tool in career counselling. Focusing on individual and privately-based career counselling, the 'virtual counsellor' tool (VIRCOUNS) will take the form of an interactive CD-Rom package that will be developed and piloted amongst project partners. A large part ...
Read Project

 10

 FINISHED 
Continuing education and nonformal forms of learning and professional improvement prefer learning through practical experience. This idea is supported by innovative solutions e.g. training modules and didactic materials, that support employees when performing vocational tasks. E-packages for improvement of employees competencies are solutions that make self learning and improving skills easier in ...
Read Project

 5

 FINISHED 
Employers expect from vocational schools graduates', among others, creativity and innovativeness, abilities to solve problems, team work, efficient use of information-communication technology tools. The experience proves that the innovative combination of the environment, IT and moderation techniques is an effective support for all kinds of team work. It contributes to create innovative problem so ...
Read Project

 6