Search for European Projects

25 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Industry 4.0 for SMEs - Smart Manufacturing and Logistics for SMEs in an X-to-order and Mass Customization Environment (SME 4.0)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

Industry 4.0 refers to the fourth industrial revolution and technological evolution from embedded systems to cyber-physical systems (CPS) in production. The main objectives of Industry 4.0 can be summarized as the introduction of intelligent systems in production and logistics, the development of highly adaptable and modular manufacturing and logistics systems, the integration of sustainable and a ...
Read Project

 4

 FINISHED 

Sustainable Low Impact Mining solution for exploitation of small mineral deposits based on advanced rock blasting and environmental technologies (SLIM)

Start date: Nov 1, 2016, End date: Oct 31, 2020,

The main economic, technological and environmental challenges of small mining include reducing high investment costs, reducing generation of waste and large tailings, identifying and addressing environmental impacts, and improving flexibility, automation and safety of operations. However, at the moment, there is no quick-fix available to reduce the environmental impact from mines, and it is neithe ...
Read Project

 14

 FINISHED 

EU Training Network for Resource Recovery through Enhanced Landfill Mining (NEW-MINE)

Start date: Sep 1, 2016, End date: Aug 31, 2020,

Europe has somewhere between 150,000 and 500,000 landfill sites, with an estimated 90% of them being “non-sanitary” landfills, predating the EU Landfill Directive of 1999. These older landfills tend to be filled with municipal solid waste and often lack any environmental protection technology. In order to avoid future environmental and health problems, many of these landfills will soon require exp ...
Read Project

 12

 FINISHED 

Minerals Policy Guidance for Europe (MIN-GUIDE)

Start date: Feb 1, 2016, End date: Jan 31, 2019,

MIN-GUIDE is a project addressing the need for a secure and sustainable supply of minerals in Europe by developing a ‘Minerals Policy Guide’. The key objectives of the project are (1) providing guidance for EU and MS minerals policy, (2) facilitating minerals policy decision making through knowledge co-production for transferability of best practice minerals policy, and (3) fostering community and ...
Read Project

 11

 FINISHED 

Development of ceramic and multi material components by additive manufacturing methods for personalized medical products (CerAMfacturing)

Start date: Oct 1, 2015, End date: Sep 30, 2018,

The cerAMfacturing project will develop a completely new approach for ceramic multi material additive manufacturing which will allow series production of customised and multifunctional components for manifold applications for obtaining property combinations, like electrical conductive/electrical insulating, dense/porous or two-colored components. In five case studies demonstrators for personalized ...
Read Project

 11

 FINISHED 

Fast track innovative drilling system for deep geothermal challenges in Europe (ThermoDrill)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

Europe is confronted with significant changes arising from globalisation and the currently political challenges. This means for example based on the latest developments in Ukraine and exceptionally strong European dependency on gas from Russia, deep geothermal energy particularly based on engineered geothermal systems is becoming even more important to care for Europe`s energy security.If deep geo ...
Read Project

 10

 FINISHED 

Project for higher education student and staff mobility between Programme Countries and Partner Countries

Start date: Jun 1, 2016, End date: Jul 31, 2018,

This is a project for higher education student and staff mobility between Programme Countries and Partner Countries. Please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2016, End date: May 31, 2018,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Resource Efficient Production Route for Rare Earth Magnets (REProMag)

Start date: Jan 1, 2015, End date: Dec 31, 2017,

The overall objective of the REProMag project is to develop and validate an innovative, resource-efficient manufacturing route (SDS process) for Rare Earth magnets that allows for the economically efficient production of net-shape magnetic parts with complex structures and geometries, while being 100% waste-free along the whole manufacturing chain. The new Shaping, Debinding and Sintering (SDS) pr ...
Read Project

 15

 FINISHED 

Pre-standardisation of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale (ISTRESS)

Start date: Jan 1, 2014, End date: Dec 31, 2016,

"Intrinsic (or residual) stresses, resulting from manufacturing or processing steps, mostly define the performance and limit the lifetime of nanostructured materials, thin films, coatings and MEMS devices.The established techniques for micron-scale measurement of residual stress still have strong limitations, e.g. in terms of spatial resolution, lack of depth sensing, their applicability on non-cr ...
Read Project

 16

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2015, End date: Sep 30, 2016,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Selective Tape-Laying for Cost-Effective Manufacturing of Optimised Multi-Material Components (Stellar)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

The aim of the Stellar project is to develop the manufacturing process for high-speed placement of carbon, glass and polymer fibre reinforced matrices, in selected locations in a composite structure, to provide the optimum reinforcement, weight and cost profile within a part.The use of composite materials in structural components is becoming well established in a range of applications, and the mat ...
Read Project

 11

 FINISHED 

Enhanced Power Pilot Line - EPPL (EPPL)

Start date: Apr 1, 2013, End date: Mar 31, 2016,

A sustainable and competitive European power semiconductor industry is essential to support the megatrend developments formulated in the Europe 2020 strategy - climate change, energy security, food security, and health and aging population. In practically all these areas, power semiconductors play a vital role. Thus, it is of paramount importance to defend and further extend Europe’s leading posit ...
Read Project

 33

 FINISHED 

Coordinating and Leveraging regional knowledge for initiating a Sustainable and optimised EU Waste to Energy Programme (COOLSWEEP)

Start date: Jan 1, 2013, End date: Dec 31, 2015,

COOLSWEEP comprises 5 established research driven triple helix clusters, one cluster under development and a specialist cluster analysis organisation. The clusters have recognised that the newly emerging field of waste-to-energy urgently requires the establishment of a coordinated “smart specialisation strategy‟.The proposed work will compare and contrast the 6 regions to determine the global pict ...
Read Project

 11

 FINISHED 

Development of Resource-efficient and Advanced underGrOund techNologies (DRAGON)

Start date: Oct 1, 2012, End date: Sep 30, 2015,

Increased global competition, economic requirements in order to act budget-conscious as well as current (and future) environmental regulations have caused/will cause the need for new underground construction technologies in order to guarantee resource-efficiency within the tunnelling processes. The before mentioned situation also calls for a paradigm shift from only landfilling with excavation mat ...
Read Project

 7

 FINISHED 

Recovery of Phosphorus from Sewage Sludge and Sewage Sludge Ashes with the thermo-reductive RecoPhos-Process (RECOPHOS)

Start date: Mar 1, 2012, End date: Feb 28, 2015,

Natural phosphate sources low in heavy metals are getting scarce. Containing about 15 mass-% of P2O5, sewage sludge ash can be considered a secondary phosphorus (P-) source. The P-content in the European sewage sludge could currently replace roughly 15% of the phosphate imports into the EU.Hence already for many years, almost decades, it has been tried to recover phosphorus from sewage, sludge and ...
Read Project

 11

 FINISHED 

Enhanced reliability and lifetime of ceramic components through multiscale modelling of degradation and damage (RoLiCer)

Start date: Dec 1, 2011, End date: Nov 30, 2014,

Engineering ceramics possess superior mechanical and physical properties. The exceptional wear, corrosion and contact fatigue resistance of silicon nitride and SiAlON ceramics makes them attractive materials for high temperature metalforming tools and rolling elements for bearings. Despite the efforts devoted to study this class of materials, there still exists a gap between their microstructural ...
Read Project

 7

 FINISHED 

Implementation of the Liquid infusion in the Manufacturing of Aerospace Structures (ILMAS)

Start date: Apr 1, 2013, End date: May 31, 2014,

"Liquid infusion process has been proved by recent researches to be suitable for the manufacturing of structural aeronautical components. The aim of this proposal is to develop a detailed analysis of the technical, economical and environmental impact of the extrapolation to industrial condition of the liquid infusion manufacturing technique. This analysis is deemed to be a necessary step in the su ...
Read Project

 3

 FINISHED 

MERGING ATOMISTIC AND CONTINUUM ANALYSIS OF NANOMETER LENGTH-SCALE METAL-OXIDE SYSTEMS FOR ENERGY AND CATALYSIS APPLICATIONS (MACAN)

Start date: Jun 1, 2009, End date: May 31, 2013,

The stability of thin films in contact with different materials is a critical issue for a wide range of modern devices, including high-k films in the microelectronics industry, metal electrodes for fuel cells, and nanometer sized particles on oxides for catalysis. Some groups are working on thermodynamic analysis of thin film stability, who correlate relative interface energies with dopant adsorpt ...
Read Project

 16

 FINISHED 

Paleogeography of the Paratethys: Relation to hydrocarbon source rock quality (PARATETHYS)

Start date: Jun 1, 2009, End date: May 31, 2012,

"The Neogene Paratethys successions of Central Europe and the southern Caucasus are considered as important source rocks for hydrocarbons. Due to different regional biostratigraphic stages used for potential source rock successions, paleoenvironmental correlations remain enigmatic and hydrocarbon source rock formation is poorly understood. The goal of this project is to reconstruct the Eocene to M ...
Read Project

 2

 FINISHED 

Master on Logistics and Supply Chain Management

Start date: Oct 1, 2007,

This programme has as the main goal the education of professionals able to take decisions in LSCM considering the operational, tactical and strategic aspects in Logistics and Supply Chain management from an integrated perspective by covering the technological, engineering and business related subjects.
Read Project

 6

 FINISHED 

Master on Logistics and Supply Chain Management

The Autonomous University of Barcelona (Spain), the Otto-von-Guericke University of Magdeburg (Germany), the University of Genoa (Italy), the Riga Technical University (Latvia), the University of Linköping (Sweden) and the Montan University of Leoben (Austria) are developing a Joint Degree Master Programme entitled Logistics and Supply Chain Management (LSCM) according to the principles of the Bol ...
Read Project

 6

 FINISHED 

Interactive and Unified E-Based Education and Training in Electrical Engineering

Practical teaching programmes in electrical engineering : The project will bridge a gap caused by excessive concentration on theory in electrical engineering training programmes. It will provide interactive simulations which give the student the opportunity to study the theory of the subject whilst at the same time engaging in simulated practical experiments. This project started in 2002 and laste ...
Read Project

 13

 FINISHED 

METALTRANSYS - Metallurgical Expressions Translation System

This project will develop an explanatory dictionary (Metallurgical Expressions Translation System) of technical terminology in metallurgy, for the use of workers, university students and teachers and other professionals in the engineering industry. A needs analysis by the project partner identified the need for an up-to-date collection of terms adapted to the work-situation. The result will be a ...
Read Project

 4

 FINISHED 

Creating R&D Capacities and Instruments for boosting Higher Education-Economy Cooperations

"The project aims to contribute to the creation of R&D capacities and instruments in line with TEMPUS-program objectives and wide priorities for Higher Education and Society (Knowledge triangle education-research innovation; Development of partnerships with enterprises), in order to support partner countries universities in fulfilling the central role in their national innovation systems and socie ...
Read Project

 11