Search for European Projects

22 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Commercialisation of Advanced Composite Material Technology: Carbon-Glass Hybrid in PowderEpoxy for Large (60-100m) Wind Turbine Blades (POWDERBLADE)

Start date: Nov 1, 2016, End date: Oct 31, 2019,

...et deployment of large turbines. The reduction in costs and increase in productivity will reduce the Levelised Cost of Electricity (LCOE) for the European citizen – the ultimate beneficiary of this innovation.This ambitious project is led by Éire Composites, an established industry player in composites manufacturing for the Aerospace and Renewable sectors and an experienced FP7/Horizon 2020 partic ...
Read Project

 4

 FINISHED 

Bringing flexible organic electronics to pilot innovation scale (PI-SCALE)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

“Bringing flexible organic electronics to pilot innovation scale” (PI-SCALE) is a highly needed response to bridge the gap which exists today between promising laboratory scale results of highly efficient flexible OLED modules and mass manufacturing of high value-added products. The project will integrate existing European infrastructures into a “European flexible OLED pilot line”, which will oper ...
Read Project

 14

 FINISHED 

Activating Value Chains for EU leadership in FORMulation Manufacturing 4.0 (AceForm4.0)

Start date: Oct 1, 2016, End date: Sep 30, 2018,

AceForm4.0 will strengthen European leadership in the development and commercialisation of innovative and sustainable formulated products by i) engaging stakeholders and establishing a strategic common vision, European 2025 roadmap for formulated products and an associated implementation plan; and ii) facilitating knowledge exchange activities aiming at the formation of new collaborative value cha ...
Read Project

 7

 FINISHED 

Graphene-based disruptive technologies (GrapheneCore1)

Start date: Apr 1, 2016, End date: Mar 31, 2018,

This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Read Project

 158

 FINISHED 

Demonstration of integrated smart water supply solutions at 4 sites across Europe (SmartWater4Europe)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

...needed urgently. In many countries, water quality needs improvement in order to reduce health risks and resources for water production and distribution must be used more efficiently. The European Innovation Partnership on Water has established priority areas related to the challenges in water supply distribution networks, focusing on resource efficiency, Smart Water Management and decision support ...
Read Project

 21

 FINISHED 

Cost-reduction through material optimisation and Higher EnErgy outpuT of solAr pHotovoltaic modules - joining Europe’s Research and Development efforts in support of its PV industry (CHEETAH)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

Europe has invoked the SET-Plan to design and implement an energy technology policy for Europe to accelerate the development and deployment of cost-effective renewable energy systems, including photovoltaics. With lower cost of solar electricity, PV could significantly contribute to the achievements of the 20-20-20 objectives.The Joint Program on PV of the European Energy Research Alliance (EERA-P ...
Read Project

 37

 FINISHED 

Innovative Wind Conversion Systems (10-20MW) for Offshore Applications (INNWIND.EU)

Start date: Nov 1, 2012, End date: Oct 31, 2017,

...f-the-art 10-20MW offshore wind turbine and hardware demonstrators of some of the critical components. These ambitious primary objectives lead to a set of secondary objectives, which are the specific innovations, new concepts, new technologies and proof of concepts at the sub system and turbine level.The progress beyond the state of the art is envisaged as an integrated wind turbine concept with i ...
Read Project

 29

 FINISHED 

MObility for Vocational and Educational Training 2.0

Start date: Jun 1, 2015, End date: May 31, 2017,

...ause it is composed mostly by micro and small companies. Those companies, in the framework of a DEVELOPMENT which should be INCLUSIVE (Europe 2020), need new competences in order to stimulate further innovation, to benefit of opportunities from the single market, to translate the environmental challenges in opportunities and to take advantage from the market development. (see 10 principles of Smal ...
Read Project

 30

 FINISHED 

Taking Nanotechnological Remediation Processes from Lab Scale to End User Applications for the Restoration of a Clean Environment (NANOREM)

Start date: Feb 1, 2013, End date: Jan 31, 2017,

NANOREM is designed to unlock the potential of nanoremediation and so support both the appropriate use of nanotechnology in restoring land and aquifer resources and the development of the knowledge-based economy at a world leading level for the benefit of a wide range of users in the EU environmental sector.NANOREM uniquely takes a holistic approach to examining how the potential for nanoremediati ...
Read Project

 30

 FINISHED 

End-user driven DEmo for cbrNe (EDEN)

Start date: Sep 1, 2013, End date: Dec 31, 2016,

The accidental or deliberate release of CBRNE materials are low probability events that can have a significant impact on citizens and society. Whenever and wherever they occur, they usually require a gradual and multi-facetted response as they tend to provoke severe and unexpected physical, psychological, societal, economical and political effects that cross EU-borders. Successful CBRNE resilience ...
Read Project

 47

 FINISHED 

COgnitive & Perceptive CAMeraS (COPCAMS)

Start date: Apr 1, 2013, End date: Sep 30, 2016,

Vision systems are becoming ubiquitous in our daily lives. Complex analysis of images from multiple cameras will become the norm in the future, from cars to industrial systems, from smart cities to facility monitoring, aimed at extracting meaningful, context-dependent information.Today’s market is dominated by a combination of relatively simple, fixed function, configurable cameras that stream vid ...
Read Project

 25

 FINISHED 

Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)

Start date: Oct 1, 2013, End date: Mar 31, 2016,

This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Read Project

 154

 FINISHED 

Nanoscale Defect Detection, Cleaning and Repair for Large Area Substrates (NANOMEND)

Start date: Jan 1, 2012, End date: Dec 31, 2015,

NanoMend will pioneer efforts to develop better, more integrated process inspection, cleaning, repair and control systems for nano-scale thin films on large area foils, and will do so in two exemplar vertical supply chains for functionalized polymer-coated paper products and for low cost flexible photovoltaics (PV). The aim is to demonstrate beyond state-of-the-art in-line detection, cleaning an ...
Read Project

 15

 FINISHED 

Integrating European Infrastructure to support science and development of Hydrogen- and Fuel Cell Technologies towards European Strategy for Sustainable, Competitive and Secure Energy (H2FC)

Start date: Nov 1, 2011, End date: Oct 31, 2015,

"The European Strategy Forum on Research Infrastructures (ESFRI) recognizes in its roadmap for Research Infrastructures that ""in the near future, hydrogen, as an energy carrier derived from a number of other fuels, and fuel cells, as energy transformers, are expected to play a major role, for mobile and stationary applications"". With the current fragmentation of the European R&D infrastructures ...
Read Project

 20

 FINISHED 

Commercialization Clusters of OLAE (COLAE)

Start date: Sep 1, 2011, End date: Aug 31, 2014,

...o high-quality training experiences and courses, to OLAE product and business idea feasibility support, to the best European manufacturing, pilot production facilities and services, to advanced OLAE innovation process and to coordinated support for better IPR landscaping and exploitation as a foundation of European driven business.The established regional OLAE clusters across Europe that have net ...
Read Project

 21

 FINISHED 

Innovation for Digital Fabrication (Diginova)

Start date: Mar 1, 2012, End date: Feb 28, 2014,

...ocks, high manual labor, large capital investments, high energy use, long distance transportation. Although many advanced new materials have unique functional properties that hold a great promise for innovation, they often need to meet the criteria and characteristics of this established mass production paradigm. This delays the exploitation of the huge potential of whole new classes of materials. ...
Read Project

 22

 FINISHED 

Early Recognition, Monitoring and Integrated Management of Emerging, New Technology Related Risks (iNTeg-Risk)

Start date: Dec 1, 2008, End date: May 31, 2013,

iNTeg-Risk is a large-scale integrating project aimed at improving the management of emerging risks in the innovative industry. This will be achieved by building a new risk management paradigm for emerging risks, which is a set of principles supported by a common language, commonly agreed tools & methods and Key Performance Indicators integrated into a single framework. As main impact, it will red ...
Read Project

 67

 FINISHED 

Cross-Organisational Assessment and Development of Intellectual Capital (CADIC)

Start date: Jul 1, 2010, End date: Mar 31, 2013,

"In a global knowledge-based economy high performing clusters of different organisations are seen as the core of innovation, regional development and competitiveness for their members. Therefore there is a growing need for SMEs in Europe to engage and collaborate in networks and clusters. The European research project CADIC will help a large number of SME to set up and strengthen own clusters and ...
Read Project

 18

 FINISHED 

Prozessorientiertes Training im Fokus des Verstehens, Reflektierens und Optimierens von Gesamtprozessen

Das Ziel des Projektes ist die Entwicklung eines modular aufgebauten und medial unterstützten Qualifizierungskonzeptes. Dies soll in Kombination aus 7 Qualifizierungsmodulen und einer Materialien-CD Auszubildende und Facharbeiter zur Durchführung unternehmensinterner Analysen (Prozessanalysen) hinsichtlich der Ermittlung und Umsetzung von Optimierungspotentialen befähigen. Dabei findet unter ander ...
Read Project

 27

 FINISHED 

FORECREST - Training in the Development of Companies Promoting Sustainability and Technological Innovation

The FORCREST project aims at improving the employability of highly qualified young people in order to facilitate their insertion into the labour market. To do that the project will develop a set of innovative training tools focusing upon key technical skills particular to the environmental sector. The end results of the project will comprise a training needs analysis of the targeted group, a serie ...
Read Project

 28

 FINISHED 

Prozessorientiertes Training im Fokus des Verstehens, Reflektierens und Optimierens von Gesamtprozessen

Das Ziel des Projektes ist die Entwicklung eines modular aufgebauten und medial unterstützten Qualifizierungskonzeptes. Dies soll in Kombination aus 7 Qualifizierungsmodulen und einer Materialien-CD Auszubildende und Facharbeiter zur Durchführung unternehmensinterner Analysen (Prozessanalysen) hinsichtlich der Ermittlung und Umsetzung von Optimierungspotentialen befähigen. Dabei findet unter ander ...
Read Project

 27

 FINISHED 

TRANsfer Selling and Marketing Innovation Training

In order to strenghen the European Competitiveness, several organisations have been set up to support innovation and industrial cooperation: clusters, pôles de compétitivité, technopôles, innovation parks, etc.Mission of these organizations have been to provide training and consulting services to their members, in particular to high-tech SMEs.The goal of TRANSMIT project was to transfer a training ...
Read Project

 9