Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Students' Mobility Capacity Building in Higher Education in Ukraine and Serbia

Start date: Oct 15, 2016, End date: Oct 14, 2019,

MILETUS addresses capacity building in the field of virtual, real and blended mobility runs (MR) at Serbian and TURIL (Territory of the Ukraine as recognized by international law) higher education institutions (HEI). By creating the needed governance on a ministerial and institutional level, MILETUS achieves the improvement of Master graduates’ employability chances in companies working internatio ...
Read Project

 13

 FINISHED 

Development of Enviromental Engineering and injection of climate change concept for Undergraduated curriculum :EU experience for Jordan and Syria .

Start date: Oct 15, 2016, End date: Oct 14, 2019,

The project aims to ensure that the universities in Jordan and Syria can offer a high quality education compatible with European standards and meets the market needs of the emerging knowledge-based society by strengthening environmental teaching. Also, EGREEN aims to introduce the concept of environmental and climate change issues in order to graduate professional leaders who can meet market needs ...
Read Project

 14

 FINISHED 

New generation of nanoporous organic and hybrid aerogels for industrial applications: from the lab to pilot scale production (NanoHybrids)

Start date: Nov 1, 2015, End date: Apr 30, 2019,

The main objective of the project is the development of the pilot scale production system of the new generation of nanoporous organic and hybrid aerogels with multiple functions for application in gas and humidity adsorption, personal care and food. Thereby the fast manufacturing in form of spherical particles will be in focus in order to reduce the process time and to decrease the overall process ...
Read Project

 13

 FINISHED 

Personalised Airport Systems for Seamless Mobility and Experience (PASSME)

Start date: Jun 1, 2015, End date: May 31, 2018,

PASSME aims to deliver industry-driven, passenger-centric novel solutions (up to TRL6) for passengers, airports and airlines to address the anticipated increase in demand for commercial flights in Europe by 2050. The goal is to reduce travel time by at least 60 minutes by integrating information between all stakeholders and transforming airport and aircraft operations and interiors to make the pas ...
Read Project

 12

 FINISHED 

"""2nd Generation Active Wing“ – Active Flow- Loads & Noise control on next generation wing" (AFLONEXT)

Start date: Jun 1, 2013, End date: May 31, 2018,

AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Read Project

 41

 FINISHED 

Air Traffic Management for environment (ATM4E)

Start date: May 1, 2016, End date: Apr 30, 2018,

The overall aim of ATM4E is to explore the scope for the potential reduction of air traffic environmental impacts in European airspace on climate, air quality, and noise through optimization of air traffic operationsThe project will integrate existing methodologies for assessment of the environmental impact of aviation, in order to evaluate the feasibility of environmentally-optimized flight opera ...
Read Project

 6

 FINISHED 

Graphene-based disruptive technologies (GrapheneCore1)

Start date: Apr 1, 2016, End date: Mar 31, 2018,

This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Read Project

 158

 FINISHED 

Silicon Nitride Coatings for Improved Implant Function (LifeLongJoints)

Start date: Apr 1, 2013, End date: Mar 31, 2018,

Articulating joint replacements represent a medical market exceeding €14 billion p.a. that is expected to rise as demographics reflect an ageing population. However, faster growth has been seen in the revision market, where prosthetic joints are replaced, than in primary interventions. The major cause of these revisions is that all joint replacements are prone to wear leading to loss of implant fu ...
Read Project

 16

 FINISHED 

Long-term research activities in the area of advanced CO2 Capture Technologies for Clean Coal Energy Generation (CO2TRIP)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

"Coal combustion is the main source for producing energy. Nowadays, the reduction of CO2 emission from energy sector is the most important field of research. Refinement and development of current technology are the main activities in this proposal. Transfer of knowledge and experience in the area of innovation CO2 capture technology is the main goal of the Proposal. Those activities allow to reduc ...
Read Project

 4

 FINISHED 

Preparing for Extreme And Rare events in coastaL regions (PEARL)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

"Coastal floods are one of the most dangerous and harmful natural hazards affecting urban areas adjacent to shorelines. Rapid urbanisation combined with climate change and poor governance means a significant increase in the risk of local surface flooding coinciding with high water levels in rivers and high tide or storm surges from the sea, posing a greater risk of devastation to coastal communiti ...
Read Project

 26

 FINISHED 

CAScade deoxygenation process using tailored nanoCATalysts for the production of BiofuELs from lignocellullosic biomass (CASCATBEL)

Start date: Nov 1, 2013, End date: Oct 31, 2017,

The present project is aimed to the development of a multi-step process for the production of second-generation biofuels from lignocellulosic biomass in a cost-efficient way through the use of tailored nanostructured catalysts. The proposed process is based on the cascade combination of three catalytic transformations: catalytic pyrolysis, intermediate deoxygenation and hydrodeoxygenation. The seq ...
Read Project

 18

 FINISHED 

Early identification of STEM readiness and targeted academic interventions

Start date: Oct 1, 2014, End date: Sep 30, 2017,

For Europe to remain at the forefront of scientific and technological development, the current shortage of persons trained in these fields at secondary and higher education has to be overcome. While some progress has been made in increasing enrolment in Science, Technology, Engineering and Mathematics (STEM) programs in most European countries as stipulated by the Lisbon Objectives, the most press ...
Read Project

 7

 FINISHED 

Joint Operation for Ultra Low Emission Shipping (JOULES)

Start date: Jun 1, 2013, End date: May 31, 2017,

Reducing emissions from shipping has increasingly become a challenge over the last years, both as a counter measure against global climate change and to protect local environments and population from waste, gas emissions and noise.This challenge has been documented both in policy papers, like the Europe 2020 initiative or the Transport White Paper, and in rules and regulations issued by IMO as wel ...
Read Project

 44

 FINISHED 

More Affordable Aircraft structure through eXtended, Integrated, and Mature nUmerical Sizing (MAAXIMUS)

Start date: Apr 1, 2008, End date: Sep 30, 2016,

Even though composite materials are more and more used in modern airframes, many significant improvements are still achievable. Firstly, the substitution of the assembly of many small composite parts by a single one-shot large part provides additional weight reduction. Secondly, the final assembly line process must be adapted to composite properties (lack of ductility, stiffness). Thirdly, if the ...
Read Project

 60

 FINISHED 

ACTUATION 2015: Modular Electro Mechanical Actuators for ACARE 2020 Aircraft and Helicopters (ACTUATION2015)

Start date: Nov 1, 2011, End date: Apr 30, 2016,

The All-Electric Aircraft is a major target for the next generation of aircraft to lower consumption of non-propulsive power and thus fuel burn. To eliminate hydraulic circuits, pumps and reservoirs, Electro Mechanical Actuators (EMA) are mandatory but now need to meet cost, reliability and weight requirements from the airframers.ACTUATION2015 aims to develop and validate a common set of standard ...
Read Project

 56

 FINISHED 

Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)

Start date: Oct 1, 2013, End date: Mar 31, 2016,

This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Read Project

 154

 FINISHED 

The SAfer FUEL system (SAFUEL)

Start date: Sep 1, 2012, End date: Feb 29, 2016,

"Fuel Systems (FS) are critical for aircraft safety. Fire, ice and system failures are typical safety hazards associated to FS. FS accidents, though only representing 2% of accidents/incidents, continue to be a recurrent concern, especially as: the complexity of FS escalades to cope with increasing needs, including more stringent safety requirements ; flight conditions evolve with new routes at hi ...
Read Project

 13

 FINISHED 

InnoVative Flexible Electric Transport (V-FEATHER)

Start date: Jul 1, 2012, End date: Oct 31, 2015,

The V-FEATHER project presents a complete electric vehicle architecture vision on how urban light duty vehicles will be designed, built and run in the near future. This project is led by industrial partners with emphasis on energy efficiency, commercial viability, life cycle design and development of new technologies for LDVs steered by leading research institutes.The vehicle is built around an ac ...
Read Project

 11

 FINISHED 

Efficient Energy Integrated Solutions for Manufacturing Industries (EFENIS)

Start date: Aug 1, 2012, End date: Jul 31, 2015,

The overall objective of EFENIS is to facilitate and accelerate a move to low carbon manufacturing processes and site management by deployment and demonstration of innovative energy management systems and enabling efficiency technologies, which extend the scope of energy management outside the boundaries of a single plant to total site and then beyond the total site to district heating/cooling sys ...
Read Project

 18

 FINISHED 

Cargo Securing to prevent cargo damages on road, sea, rail and air (CARING)

End date: May 16, 2015,

A study on fatal accidents of professional drivers in Finland (Laapotti & Peräaho 2011) has revealed that the risks in loading and securing of cargo comprised 12 % of all vehicular risk factors. This was more than the proportion of risks connected to tires and brakes together (10 %). Europe is an area where goods and products can move around freely, without any checks at the national borders. Thi ...
Read Project

 18

 FINISHED 

Climate Adaptation Mainstreaming through Innovation (CAMINO)

Start date: Feb 8, 2013, End date: Jan 2, 2015,

CAMINO reconciles economic growth (Europe2020) and climate adaptation. It delivers innovative governance approaches and business cases that support mainstreaming climate adaptation in local investment projects and product/service development. CAMINO builds upon results of MARE, SKINT, SAWA (NSR), FRC (NWE) & BaltCica (BSR) and enriches its 5 regional Partnerships with industry and (inter)national ...
Read Project

 7

 FINISHED 

Smart Aircraft in Emergency Situations (SMAES)

Start date: Feb 1, 2011, End date: Oct 31, 2014,

"Ditching analysis is requested for large transport aircraft by EASA. The respective requirements are specified under § ‘’CS 25.801 Ditching’’. They are primarily devoted to a minimisation of risks for immediate injuries and the provision of fair chances for an evacuation. A significant part of average air travel is over water and historically a planned or unplanned water-landing event occurs gros ...
Read Project

 16

 FINISHED 

Collaborative research on flood resilience in urban areas (CORFU)

Start date: Apr 1, 2010, End date: Jun 30, 2014,

Collaborative research on flood resilience in urban areas (CORFU) is an interdisciplinary international project that will look at advanced and novel strategies and provide adequate measures for improved flood management in cities. The differences in urban flooding problems in Asia and in Europe range from levels of economic development, infrastructure age, social systems and decision making proces ...
Read Project

 17

 FINISHED 

Targeted Advanced Research for Global Efficiency of Transportation Shipping (TARGETS)

Start date: Dec 1, 2010, End date: Mar 31, 2014,

"The TARGETS proposal has been initiated in response to the COOPERATION work programme of the European Commission, Theme 7, Transport and Aeronautics. In particular, it addresses area SST.2010.1.1-2 / Energy Efficient Ships, in that it seeks to provide substantial improvements to ship energy consumption during the operation of cargo vessels.The prime goal of TARGETS - Targeted Advanced Research fo ...
Read Project

 11

 FINISHED 

Strategic Research For Innovative Marine Propulsion Concepts (STREAMLINE)

Start date: Mar 1, 2010, End date: Feb 28, 2014,

"Increasing environmental concerns and soaring oil prices are creating a new focus on fuel efficiency for the marine industry. Combining low emissions with demands for more advanced vessels than ever before drives the need for radically new propulsion concepts delivering a step-change in efficiency. STREAMLINE is the response of the marine community to this demand that will be addressed through fo ...
Read Project

 23

 FINISHED 

Functionalities of Bismuth based nanostructures (BisNano)

Start date: Oct 1, 2010, End date: Dec 31, 2013,

The aim of the present project is to explore the properties and possible applications of bismuth and bismuth based compounds when they are synthesized at the nanometric scale. This approach is motivated by the uncommon but advantageous properties of bismuth which, in part, have been exploited for many years. However, there are many unexplored possibilities and with the advent of nanotechnology new ...
Read Project

 19

 FINISHED 

Innovative CO2 capture (iCap)

Start date: Jan 1, 2010, End date: Dec 31, 2013,

In post-combustion CO2 capture, a main bottleneck causing significant reduction in power plant efficiency and preventing cost effectiveness is the low flue gas CO2 partial pressure, limiting membrane flux, solvent selection and capacity. In pre-combustion CO2 capture, key bottlenecks are number of processing steps, possible low hydrogen pressure, and high hydrogen fraction in the fuel Global deplo ...
Read Project

 14

 FINISHED 

"SPINEFX: A University–Industry Network for the Training of High-quality Multidisciplinary Researchers to Deliver Enterprising, Cost-effective Surgical Solutions for Spinal Disease and Trauma" (SPINEFX)

Start date: Nov 1, 2009, End date: Oct 31, 2013,

"SPINEFX is an integrated ITN comprising academic, industrial and clinical partners that is designed to create exceptionally trained researchers with the key skills to deliver commercially significant, innovative solutions to the challenges posed by spinal disease and trauma, namely vertebral fracture. The significant economic and personal impact of these fractures can be gleaned from the fact tha ...
Read Project

 8

 FINISHED 

Smart Resilience Technology, Systems and Tools (SMARTeST)

Start date: Jan 1, 2010, End date: Jun 30, 2013,

The programme, involving leading European organisations, will develop innovative smart technology, systems and implementation tools. The project is set out into six main work packages: WP1 – Management: controlling the operation, scientific excellence and finance of the consortium. WP2 – FRe technology: developing innovative and smart technology and products, based on extending current products an ...
Read Project

 10

 FINISHED 

HIRF Synthetic Environment (HIRF SE)

Start date: Dec 1, 2008, End date: May 31, 2013,

"The HIRF SE research project has the goal of providing the aeronautics industry with a framework which can be used during the development phase to mitigate the EM aspects. In addition it will provide a considerable reduction in the certification/qualification tests required on air vehicle. The HIRF SE main objectives can be summarized by the two followings items: • Full validated and integrated s ...
Read Project

 45

 FINISHED 

Breakthrough in European Ship and Shipbuilding Technologies (BESST)

Start date: Sep 1, 2009, End date: Feb 28, 2013,

"Initiated by EUROYARDS, BESST aims to achieve a breakthrough in competitiveness, environmentally friendliness and safety of EU built ships. Focusing on passenger ships, ferries and mega-yachts, the results will to a large extend be applicable also to other ships. A holistic life cycle performance assessment on ship level will guide the technical developments on system level, clustered in System G ...
Read Project

 70

 FINISHED 

Maritime Transport Cluster (MTC)

Start date: Jun 9, 2011, End date: Dec 9, 2012,

MTC will build a structure for exchanging information on the latest knowledge and experiences concerning maritime transport issues by establishing a network covering all transport related NSRP projects. MTC will identify synergies between NSRP project results and consolidate these into overall programme outcomes on transport. The results will be discussed with the business, public sector & researc ...
Read Project

 8

 FINISHED 

Impact of Climate Change on the quality of urban and coastal waters (DiPol)

Start date: Dec 31, 2008, End date: Jun 29, 2012,

DiPol aims at identifying impacts and at suggesting measures to reduce adverse consequences of climatic changes for the quality of urban and coastal waters. Hence it will have a direct impact on water quality. A programme tool, (SIMACLIM) that illustrates the impacts of climate changes on water quality and which is able to evaluate consequences of potential measures to help regional and national d ...
Read Project

 19

 FINISHED 

SCAlable & ReconfigurabLe Electronics plaTforms and Tools (SCARLETT)

Start date: May 1, 2008, End date: Apr 30, 2012,

"The first generation of Integrated Modular Avionics (IMA1G) has been researched via European funded research projects; PAMELA, NEVADA and VICTORIA. This technology supported a revolutionary step away from federated architectures and their classical bespoke electronics to a modular architecture with common resources. IMA1G was introduced to the market on the A380, A400M and B787 aircraft. IMA1G re ...
Read Project

 39

 FINISHED 

Integrated bioconversion of glycerine into value-added products and biogas at pilot plant scale (Propanergy)

Start date: Jan 1, 2008, End date: Dec 31, 2011,

This proposal aims at developing an integrated bioprocess to convert technical glycerine from biodiesel production into biogas and two value-added products 1,3-propanediol (PDO) and fertilizer in a biorefinery approach. The process will be developed through laboratory to pilot plant scale and allows an easy integration into a biodiesel or a biogas plant. The project will overcome three major obsta ...
Read Project

 6

 FINISHED 

Managing Adaptive Responses to changing flood risk in the North Sea Region (MARE)

Start date: Dec 31, 2008, End date: Dec 30, 2011,

Recent flooding has demonstrated the vulnerability of North Sea Region. Municipalities have an urgent need to reduce flood risk, but lack a framework and the resources. The overarching aim of MARE is to enable widespread implementation of local adaptive measures that mitigate flood risk. The project is focusing on developing a transnational methodology to implement urban Flood Risk Management (FRM ...
Read Project

 15

 FINISHED 

Strategic Alliance for integrated Water Management Actions (SAWA)

Start date: May 31, 2008, End date: Dec 30, 2011,

SAWA strives to strengthen the member states for their current implementation of the EU Flood Directive (FD) by developing a transnational implementation strategy. The aim is to adapt existing water management systems to the effects of extreme flood events due to climate change, focusing on sustainable development of society and regional economies. Based on case studies and pilot implementations S ...
Read Project

 22

 FINISHED 

Computer-Aided Semantic Annotation of Multimedia (CASAM)

Start date: Apr 1, 2008, End date: Mar 31, 2011,

Description Annotation of multimedia by employing human-machine synergy that optimizes user effort The need for annotated multimedia content is more pressing than ever before. The fully automated annotation has made recently large progress but faces limitations and unsolved issues. Thus, the machi ...
Read Project

 8

 FINISHED 

Connected Cities (CC)

Start date: Jun 30, 2005, End date: Dec 30, 2007,

European citizens travel much further to work and leisure facilities today than in the past. Despite bringing benefits, this huge increase in mobility has led to traffic congestion and pollution, holding back efforts to achieve sustainable development. Public transport can form the basis of more sustainable approaches to mobility. However, the mismatch between older public transport networks and m ...
Read Project

 25

 FINISHED 

The European Learning Network (LNet)

Start date: Jun 30, 2004, End date: Dec 30, 2007,

The five partner cities of LNET – Amsterdam, Hamburg, London, Milan and Prague – are unlocking the commercial potential of deprived urban areas. They are achieving this by identifying the most effective ways for regional development agencies and local authorities to support innovation, social enterprise and entrepreneurship in deprived areas, focusing on business support, investment and skills and ...
Read Project

 7