Search for European Projects

12 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Super high efficiency Cu(In,Ga)Se2 thin-film solar cells approaching 25% (Sharc25)

Start date: May 1, 2015, End date: Oct 31, 2018,

Prime objective of the Sharc25 project is to develop super-high efficiency Cu(In,Ga)Se2 (CIGS) solar cells for next generation of cost-beneficial solar module technology with the world leading expertise establishing the new benchmarks of global excellence. The project partners ZSW and EMPA hold the current CIGS solar cell efficiency world records of 21.7% on glass and 20.4% on polymer film, achie ...
Read Project

 13

 FINISHED 

Development of thin film Solar cells based on WIde band Gap kesterite absorbers (SWInG)

Start date: Jun 1, 2015, End date: May 31, 2018,

The aim of this proposal is to develop wide band gap thin film solar cells based on kesterite absorbers for future application in high efficiency and low cost tandem PV devices. The SWInG working group will focus both on the development of the processes for the synthesis of such solar cells based on the Cu2ZnXY4 (with X=Sn, Si and Y= S, Se) compounds and on the understanding of the physical and el ...
Read Project

 9

 FINISHED 

Five Volt Lithium Ion Batteries with Silicon Anodes produced for Next Generation Electric Vehicles (FIVEVB)

Start date: May 1, 2015, End date: Apr 30, 2018,

The FiveVB project will develop a new cell technology based on innovative materials such as high capacity anodes, high voltage cathodes and stable, safe and environmentally friendly electrolytes. Since main European industry partners representing the value chain from materials supplier to car manufacturer are involved, this program will support and enable the development of a strong and competitiv ...
Read Project

 11

 FINISHED 

Cost-reduction through material optimisation and Higher EnErgy outpuT of solAr pHotovoltaic modules - joining Europe’s Research and Development efforts in support of its PV industry (CHEETAH)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

Europe has invoked the SET-Plan to design and implement an energy technology policy for Europe to accelerate the development and deployment of cost-effective renewable energy systems, including photovoltaics. With lower cost of solar electricity, PV could significantly contribute to the achievements of the 20-20-20 objectives.The Joint Program on PV of the European Energy Research Alliance (EERA-P ...
Read Project

 37

 FINISHED 

MAnufacTuring Improved Stack with textured Surface Electrodes for Stationary and CHP applications (MATISSE)

Start date: Oct 1, 2014, End date: Sep 30, 2017,

MATISSE is a 36-month project targeting to the delivery of PEMFC advanced cells and stacks for stationary applications. The project methodology will include assessment of stack incremented with new materials and processes developed during the project. The project will address three stack designs for each of the stationary conditions of operation of the fuel cell i.e. H2/O2, H2/air and reformate H2 ...
Read Project

 6

 FINISHED 

Advanced materials for batteries (MAT4BAT)

Start date: Sep 1, 2013, End date: Feb 28, 2017,

"Li-ion technologies initiated in the 90’ at a fast development pace thanks mainly to emerging ICTs with more than 20 GWh sold in 2010. Soon, it appeared as a credible technology for electrical vehicles as it could provide average energy densities of about 140 Wh/kg. However and since then,major breakthroughs have been expected to reach higher storage levels of 250 Wh/kg on battery system level wi ...
Read Project

 18

 FINISHED 

Improved Lifetime of Automotive Application Fuel Cells with ultra low Pt-loading (IMPACT)

Start date: Nov 1, 2012, End date: Oct 31, 2016,

"The main objective of the planned project IMPACT is to increase the life-time of fuel cells with membrane-electrode assemblies containing ultra low Pt-loading (< 0.2 mg cm-2) for automotive applications. The economic requirements to reduce Pt loading leads to the challenge to maintain durability and performance, an aspect which has not been addressed sufficiently in public projects and studies. A ...
Read Project

 13

 FINISHED 

Roll-to-roll manufacturing of high efficiency and low cost flexible CIGS solar modules (R2R-CIGS)

Start date: Apr 1, 2012, End date: Sep 30, 2015,

"CIGS solar module technology on rigid glass substrate is already mature and industrial companies are producing hundreds of MWp each year. Bringing flexible CIGS solar modules to industrial maturity will yield the next breakthrough for further cost reduction by taking into account the inherent advantages of thin film technology, e.g. high throughput and large scale coating with less energy and mat ...
Read Project

 12

 FINISHED 

Lithium Sulfur Superbattery Exploitating Nanotechnology (LISSEN)

Start date: Sep 1, 2012, End date: Aug 31, 2015,

"This project is aimed to the identification and development of nanostructured electrode and electrolyte materials to promote the practical implementation of the very high energy lithium-sulfur battery. In particular, the project will be directed to the definition and test of a new, lithium metal-free battery configuration based on the use of lithiated silicon as the anode and a nanostructured sul ...
Read Project

 16

 FINISHED 

Development of PEM Fuel Cell Stack Reference Test Procedures for Industry (StackTest)

Start date: Sep 1, 2012, End date: Aug 31, 2015,

In this project proposal, industry wide harmonized test procedures for PEFC stacks shall be developed and validated. The proposal builds on experiences gained in the FCTESTNET, FCSTEQA series of projects taking up the methodology developed there and expanding it to the test of PEFC stacks. Furthermore, experiences of individual consortium members have long time experience in international standard ...
Read Project

 12

 FINISHED 

Cost-effective and reliable hydrogen sensors for facilitating the safe use of hydrogen (H2Sense)

Start date: Jun 1, 2013, End date: Aug 31, 2014,

This project is related to the effective deployment and availability of reliable hydrogen sensors, primarily but not exclusively for use in applications using hydrogen as an alternative fuel.The objective is to support and unite stakeholders including sensor manufactures/developers, sensor end-users, certification bodies and independent sensor evaluators having the aim to avoid any hazardous event ...
Read Project

 7

 FINISHED 

Automotive Fuel Cell Stack Cluster Initiative for Europe (Auto-Stack)

Start date: Jan 1, 2010, End date: Sep 30, 2011,

While the supply base for materials and components in Europe is well advanced and competitive, stack integration is lagging behind due to massive investment requirements and risks associated with commercialization. The project aims to develop approaches to address the critical barriers for substantial improvement of collaboration between major stakeholders and establishing a solid business model f ...
Read Project

 15