"The main objective of the planned project IMPACT is to increase the life-time of fuel cells with membrane-electrode assemblies containing ultra low Pt-loading (< 0.2 mg cm-2) for automotive applications. The economic requirements to reduce Pt loading leads to the challenge to maintain durability and performance, an aspect which has not been addressed sufficiently in public projects and studies. A durability of 5000 h under dynamic operation conditions with ultra low loading is envisioned for automotive applications. IMPACT aims at improving significantly durability in the automotive application at reduced PGM loadings by material development and MEA development. Development ist performed on the main components of the cell, namely the membrane, the gas diffusion media and the electrodes. The basis for the durability is extensive testing at the industrial and research partner`s facilities under diverse and highly dynamic conditions and comprehensive and detailed analysis and evaluation of degradation processes and their importance for fuel cell performance loss. This analysis is utilized for the derivation of mitigation strategies by component modification and optimization of operation modes. The mitigation strategies are experimentally validated and consecutively lead to a demonstration of the improved durability in an predefined stack. IMPACT also aims at providing a cost analysis and an evaluation of the technical feasibility for large scale utilization of the project achievements. Recommendation and dissemination activities are planed within scientific workshops, publication of the results in scientific journals, and using project fact sheets."