Search for European Projects

31 European Projects Found

Searched on 125080 European Projects

 FINISHED 

European Network for Sustainable Mobility at University (U-MOB LIFE)

Start date: Jul 1, 2016, End date: Jun 30, 2021,

Background Sustainable urban mobility can be defined as the implementation of a system in which private vehicles, public transport, roads and parking spaces form an integrated whole. The EU strategy on the urban environment proposes to "change radically the balance among different transport systems, favouring public over private and reducing the impact of ...
Read Project

 6

 FINISHED 

Reading Early SChool leaving signals

Start date: Sep 1, 2016, End date: Aug 31, 2019,

According to the Thematic Working Group survey on Early School Leaving (2012), there are 3 key issues to consider in creating a ESL prevention mechanism: (1) The importance of the role of teachers; (2) importance of individualized support and counselling; (3) co-operation between schools and other key stakeholders involved in the lives of young people. We built our intervention strategy on these v ...
Read Project

 7

 FINISHED 

Reliable Electromechanical actuator for PRImary SurfacE with health monitoring (REPRISE)

Start date: Jul 1, 2016, End date: Dec 31, 2018,

The REPRISE project responds to the call JTI-CS2-2015-CFP02-SYS-03-01. The objective of the project is the design and development of an innovative electromechanical actuation system with health monitoring for primary-control-surface of a small aircraft. It is well-known that the electromechanical actuation will lead to weight saving and life-cycle cost reduction but some critical issues of this te ...
Read Project

 3

 FINISHED 

Laboratory for Policies and Practices of Social Development in Higher Education

Start date: Sep 1, 2015, End date: Aug 31, 2018,

Context-background: The financial and economic crisis is currently directly or indirectly affecting the middle and lower classes, with controversial policies for reducing the fiscal deficit, which have meant, for example, a rise in the cost of access to higher levels of training, creating in some European countries, newly excluded groups from Higher Education (HE). Inequalities in training for rea ...
Read Project

 6

 FINISHED 

Project for higher education student and staff mobility between Programme Countries and Partner Countries

Start date: Jun 1, 2016, End date: Jul 31, 2018,

This is a project for higher education student and staff mobility between Programme Countries and Partner Countries. Please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Towards Industrial LES/DNS in Aeronautics – Paving the Way for Future Accurate CFD (TILDA)

Start date: May 1, 2015, End date: Apr 30, 2018,

The ability to simulate aerodynamic flows using CFD methods has progressed rapidly over the last decades and has given rise to a change in design processes in aeronautics already. But more improvement is necessary to overcome the (still) existing lack in confidence in CFD usage, based on turbulence modelling. The TILDA project will offer methods and approaches combining advanced and efficient high ...
Read Project

 12

 FINISHED 

Gap Analysis for Integrated Atmospheric ECV CLImate Monitoring (GAIA-CLIM)

Start date: Mar 1, 2015, End date: Feb 28, 2018,

There is a recognised need for establishing sound methods for the characterisation of satellite-based Earth Observation (EO) data by surface-based and sub-orbital measurement platforms - spanning Atmosphere, Ocean and Land observations and the entire radiance spectrum. Robust EO instrument characterisation is about significantly more than simply where and when a given set of EO and ground-based / ...
Read Project

 18

 FINISHED 

Cloud Manufacturing and Social Software Based Context Sensitive Product-Service Engineering Environment for Globally Distributed Enterprise (DIVERSITY)

Start date: Feb 1, 2015, End date: Jan 31, 2018,

To meet requirements of mass customisation, the manufacturers of machines and equipment for production of mass customised products need powerful engineering environments to allow for multi-directional exchange of knowledge between product design, service design and manufacturing, as well as customers and other relevant organisations across the value chain, distributed all over the globe. Specifica ...
Read Project

 9

 FINISHED 

Enforceable Security in the Cloud to Uphold Data Ownership (ESCUDO-CLOUD)

Start date: Jan 1, 2015, End date: Dec 31, 2017,

Cloud computing is increasingly a necessary strategical ICT infrastructure component for European companies to successfully compete in the world-wide economy. The advantages of renting ICT infrastructures, platforms, and services, with easy access to scalability and elasticity, are driving an ever accelerating transfer toward the cloud of data and applications. Unfortunately, such a convenience co ...
Read Project

 9

 FINISHED 

Retail Sector Competencies for all Teachers

Start date: Nov 1, 2015, End date: Oct 31, 2017,

Teaching self and social competencies in vocational education and training has great relevance to achieve employability in all European countries. This, especially concerns the customer-intensive retail sector. However, these competencies are taught insufficiently in vocational education so far. Therefore, four teaching-learning arrangements have been implemented in advance for vocational schools/ ...
Read Project

 6

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2016, End date: Sep 30, 2017,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

European Policies on Education and Training (Le politiche europee sulla formazione)

Start date: Sep 1, 2014, End date: Aug 31, 2017,

With the Module “Le politiche europee sulla formazione” (“European policies on education and training”) we propose to put the University’s reflection in the framework of pedagogic thinking aimed at fostering a new ability to think public policies in the European area. At the same time, the Module aims to give rise to a progressive Europeanization of the debate on the pedagogy’s issues within the h ...
Read Project

 1

 FINISHED 

Anticorruption Policies Revisited. Global Trends and European Responses to the Challenge of Corruption (ANTICORRP)

Start date: Mar 1, 2012, End date: Feb 28, 2017,

The central objective of ANTICORRP is to investigate and explain the factors that promote or hinder the development of effective anticorruption policies and impartial government institutions. ANTICORRP directly addresses the objective in the Work Program by examining what the causes of corruption are, how corruption can be conceptualized, measured and analysed, what the impact of corruption on s ...
Read Project

 22

 FINISHED 

Simulation of cavitation and erosion in fuel injection systems of medium/heavy duty Diesel engines at injection pressures reaching 3000bar (FuelSystem3000)

Start date: Jan 1, 2013, End date: Dec 31, 2016,

The medium/heavy duty Diesel engine industry is facing new challenges for meeting the forthcoming emission regulations. Injection pressure above 2500bar and possibly reaching 3000bar and multiple injection strategy can drastically reduce the NOx/PM trade-off and allow use of cheap after treatment systems for meeting the set legislations. However, such injection strategies inevitably result to form ...
Read Project

 4

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2015, End date: Sep 30, 2016,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Health On Line Monitoring for Electro-mechanical actuator Safety (HOLMES)

Start date: Nov 1, 2013, End date: Jun 30, 2016,

"In the scope of the development of a more electrical aircraft, the project aims to develop a reliable tool for the health monitoring of electro-mechanical actuators (EMAs). The replacement of hydraulic systems with the implementation of EMAs on flight control actuation systems of both A/C and H/C can lead to many advantages but, since the mechanical jam of such a system has to be considered as a ...
Read Project

 2

 FINISHED 

"Bordering, Political Landscapes and Social Arenas: Potentials and Challenges of Evolving Border Concepts in a post-Cold War World" (EUBORDERSCAPES)

Start date: Jun 1, 2012, End date: May 31, 2016,

"In order to gauge its significance, conceptual change in the study of borders must be seen in relation to fundamental social, economic and geopolitical transformations that have taken place in the past decades. In addition, major paradigmatic shifts in scientific debate, and in the social sciences in particular, must also be considered. Recognising the close interrelationships between social chan ...
Read Project

 20

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2014, End date: Sep 30, 2015,

In the framework of The Erasmus+ Programme - Key Action 1 ? Learning Mobility of Individuals, the University of Bergamo achieved all the qualitative and quantitative objectives addressed at time of application and approved in the Grant Agreement signed with the National Agency. Particular emphasis was placed on the modernization and internalization of our University, on the potential growth of ...
Read Project

 1

 FINISHED 

Product-Service System across Life Cycle (ProSSaLiC)

Start date: Jul 1, 2011, End date: Jun 30, 2015,

Nowadays, customers’ purchase habits have changed: they do not buy more goods or services in the traditional sense, perceiving them as two separated entities. They rather look for a solution, whose value encompasses many intertwined components, some of them being services and some being goods. In this context, the Product-Service System (PSS) concept finds its root. The servitization process of a ...
Read Project

 7

 FINISHED 

Fuel Injector Research for Sustainable Transport (FIRST)

Start date: Dec 1, 2010, End date: Nov 30, 2014,

FIRST will deliver key enabling technologies for combustion emission reduction by developing improved design tools and techniques for modelling and controlling fuel sprays and soot.Aviation’s environmental impact must be reduced to allow sustainable growth to benefit European industry and society. This is captured in ACARE’s 2020 goals of reducing CO2 by 50%, NOx by 80% and in SRA1/2 proposed redu ...
Read Project

 22

 FINISHED 

Industrialisation of High-Order Methods – A Top-Down Approach (IDIHOM)

Start date: Oct 1, 2010, End date: Mar 31, 2014,

"The proposed IDIHOM project is motivated by the increasing demand of the European aerospace industries to advance their CFD-aided design procedure and analysis by using accurate and fast numerical methods, so-called high-order methods. They will be assessed and improved in a top-down approach by utilising industrially relevant complex test cases, so-called application challenges in the general ar ...
Read Project

 21

 FINISHED 

Policy and Security Configuration Management (PoSecCo)

Start date: Oct 1, 2010, End date: Dec 31, 2013,

Future Internet (FI) applications will see dynamic compositions of services providing a broad diversity of functions, starting with business functionality down to infrastructure services. Their progress crucially depends on the service providers' ability to deal with two interdependent challenges: (1) to achieve, maintain and prove compliance with security requirements stemming from internal needs ...
Read Project

 11

 FINISHED 

BLUE-Enterprise and Trade Statistics (BLUE-ETS)

Start date: Apr 1, 2010, End date: Mar 31, 2013,

BLUE-ETS is a project on official business statistics and, specifically, on one of EU NSIs key challenges; that is, providing high quality and robust statistical information, for better policy and socio-economic research, and to support the renewed Lisbon Strategy, while: (1) reducing the response burden; (2) simplifying and setting priorities; (3) cutting costs on enterprises, that stem from red- ...
Read Project

 16

 FINISHED 

Computer-aided food processes for control engineering (CAFE)

Start date: Jun 1, 2008, End date: Feb 28, 2013,

"The objective of the CAFE project is to provide new paradigms for the smart control of food processes, on the basis of four typical processes in the areas of bioconversion, separation, preservation and structuring. The novelty of the project lies in the capacity of combining PAT and sensing devices with models and simulation environment with the following objectives : (1) to extract as much as po ...
Read Project

 17

 FINISHED 

Best Practice in Robotics (BRICS)

Start date: Mar 1, 2009, End date: Feb 28, 2013,

Description Promoting interoperablity of the robotics technology and implementation of an integrated robotic development environment Robotic systems and applications are about to become a key technology to address two socioeconomic issues: the overaging societies and the competitiveness in the glo ...
Read Project

 10

 FINISHED 

Privacy and Identity Management in Europe for Life (PrimeLife)

Start date: Mar 1, 2008, End date: Jun 30, 2011,

Individuals in the Information Society want to protect their autonomy and retain control over personal information, irrespective of their activities. Information technologies hardly consider those requirements, thereby putting the privacy of the citizen at risk. Today, the increasingly collaborative character of the Internet enables anyone to compose service and contribute and distribute informat ...
Read Project

 15

 FINISHED 

PEP-NET: Pan European E-Participation Network (PEP-NET)

Start date: May 1, 2008, End date: Sep 30, 2010,

Description PEP-NET Networking for better eParticipationThere are many promising eParticipation efforts active in Europe, but they suffer from fragmentation and a lack of interaction and cooperation. PEP-NET will try to overcome these problems and build a European network of all stakeholders active in the field of eParticipation. PEP-NET ...
Read Project

 19

 FINISHED 

ALPINE NETWORK FOR SHEEP AND GOAT PROMOTION FOR A SUSTAINABLE TERRITORY DEVELOPMENT (ALPINET GHEEP)

Start date: Dec 31, 2004, End date: Feb 27, 2008,

A network among Alpine shepherds’ Associations, regional administrations,research institutions, will organise common, trans-national and coordinated activities to promote and to preserve sheep and goat sector, its social involvement and its capacity to participate in the sustainable spatial development. Main activities are: data collection on spreading and asset of breeding activities, on the exi ...
Read Project

 16

 FINISHED 

Introduction de l’approche basée sur les droits dans l’enseignement supérieur au Maghreb

Start date: Dec 1, 2013,

...ce de l’Université de La Rioja, l’adaptant aux problématiques régionales révélées par l’étude visée au point a).c) Création d’un Master interuniversitaire et interdisciplinaire sur l’ABDH dans la région du Maghreb. La création de cette formation prendra comme point de départ un diplôme de spécialisation on-line proposé par l'Université de la Rioja : http://fundacion.unirioja.es/formacion_cursos/vi ...
Read Project

 12

 FINISHED 

Pan-European challenge for technical innovation

A multi-disciplinary and multinational final year course : This project, developed by the Lyon institute of textiles and chemistry, aims to establish a network of universities in Europe that will provide final year students with multi-disciplinary courses in a number of European countries. This "Challenge", which already involves 5 countries and 10 partner organisations, is set to expand. This pro ...
Read Project

 11

 FINISHED 

EUDISTAT - European Distance Training System on the Quality Improvement of Statistical Techniques

The EUDISTAT project will develop the prototype of a European Distance Training Package with regard to qualitative statistical techniques used in the monitoring and control of business processes.The project addresses the results of recent analyses showing the lack of knowledge and understanding (at European level) as regards the potential benefits of the use of qualitative statistical data in busi ...
Read Project

 9