Search for European Projects

24 European Projects Found

Searched on 125080 European Projects

 FINISHED 
P2Endure aims to provide scalable, adaptable and ready-to-implement prefabricated Plug-and-Play (PnP) systems for deep renovation of building envelopes and technical systems. These innovative solutions will be used to transform non-functioning or sub-optimal public and historic buildings into dwellings, and applicable for the widest range of building typologies, i.e. public buildings, residential ...
Read Project

 16

 FINISHED 
INNOVIP Consortium will reinvent the top-of-the-line insulating material vacuum-insulation-panels (VIP) by improving their thermal performance over the entire lifetime by at least 25 % and making VIPs adjustable, mountable and machineable. By reducing the density of the core material and/or using an alternative core material together with less expensive VIP-envelopes as gas barrier, it will be po ...
Read Project

 13

 FINISHED 
Measurement campaigns have shown major discrepancies in buildings energy performance between planned energy demand and real energy consumption, while nowadays most of the newly constructed offices buildings are equipped with BMS systems, integrating a more or less extended measurement layer providing large amounts of data. Their integration in the building management sector offers an improvement c ...
Read Project

 23

 FINISHED 

Flexibility Activated Zero Energy Districts (REnnovates)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

The Ren(n)ovates proposal focuses on the deployment and demonstration of an innovative systemic, 4-step holistic approach comprising state-of-the-art renovation with state-or-the-art smart ICT control. Deep renovation of residential buildings will be carried out including the installation of a standardised pre-fabricated energy module equipped with communication technology converting the buildings ...
Read Project

 9

 FINISHED 
H-House is aiming at the development of a number of building components for modern society where awareness for environmental aspects and living comfort are not compromised but complementing each other. The concept of H-House aims at components for the building envelope and components for the interior applied to both new buildings and for renovation. The purpose of an adequate building envelope is ...
Read Project

 12

 FINISHED 
STREAMER is an industry-driven collaborative research project on Energy-efficient Buildings (EeB) with cases of mixed-use healthcare districts. Such districts are the best real examples of neighbourhood with integrated energy system consisting of mixed building types (i.e. hospitals and clinics; offices and retails; laboratories and educational buildings; temporary care homes, rehabilitation and s ...
Read Project

 20

 FINISHED 

Smart elements for sustainable building envelopes (SESBE)

Start date: Aug 1, 2013, End date: Jan 31, 2017,

There is a vastly growing demand for increased energy efficiency, safety and improved health of the buildings we live and work in. These demands need to be addressed by a mostly SME oriented building industry, which traditionally responds sluggish to technological advancement. This is partially due to restrictive building codes, which all too often delay new developments but also because the cost ...
Read Project

 12

 FINISHED 
As Europe moves towards low and zero-carbon housing, challenges arise in the management of building integrated renewable energy technologies. Electricity generating RES have the benefit of electrical connection and financial mechanisms allowing feed-in to the network. Thermal technologies do not have such general interconnectivity and therefore rely on sizing typically meeting 90% of summer demand ...
Read Project

 11

 FINISHED 
Energy use in buildings accounts for approximately 40% of EU energy consumption. Energy efficiency in new buildings is important, but existing building stock is the main target. Existing buildings, however, are characterised by particular requirements and constraints that are not present in new buildings and that requires new developments and adaptation of existing technologies.In order to fulfil ...
Read Project

 18

 FINISHED 
Manufacturated nanomaterials and nanocomposites are being considered for various uses in the construction industry and related infrastructure industries, not only for enhancing material properties and functions but also in the context of energy conservation. Despite the current relatively high cost of nano-enabled products, their use in construction materials is likely to increase because of highl ...
Read Project

 14

 FINISHED 
The ambition of this project is to enable the utilisation of the full potential of renewable energy (up to covering 100% of the energy demand on district level). In order to reach this goal, the E-hub concept is developed, which is crucial for the implementation of such a large share of renewables. An E-Hub is a physical cross point, similar to an energy station, in which energy and information st ...
Read Project

 19

 FINISHED 
The overall objective of the FC-DISTRICT project is to optimize and implement an innovative energy production and distribution concept for sustainable and energy efficient refurbished and/or new “energy autonomous” districts exploiting decentralized co-generation coupled with optimized building and district heat storage and distribution network. The concept is based on dynamic heat exchange betwee ...
Read Project

 23

 FINISHED 
The EE-QUARRY project emerges from the necessity to control a very demanding energy-intensive industry, which characterizes from its high energy demands and enormous CO2 emissions. The goal is to improve energy efficiency and to reduce CO2 on quarries, through the develop of a new and highly effective modeling and monitoring Energy Management System technique. The use of crushed stone could increa ...
Read Project

 12

 FINISHED 
The vision of E2ReBuild is to transform the retrofitting construction sector from the current craft and resource based construction towards an innovative, high-tech, energy efficient industrialised sector.E2ReBuild aims to- investigate, promote and demonstrate cost effective and advanced energy efficient retrofit strategies that create added value for existing apartment buildings and endorse end-u ...
Read Project

 21

 FINISHED 
More than 50% of bridges in European cities are older than 40 years and bridges are a vital part of the infrastructure. Bridge managers are currently dealing with a large number of structurally deficient, obsolete bridges. The need to maintain, renew, strengthen and upgrade this part of the infrastructure will increase dramatically in the near future. PANTURA has bridges as its focal point. It is, ...
Read Project

 12

 FINISHED 
In the current European Energy Scenario, the building sector is responsible for 35-40% of the total energy consumption, and space heating is the largest component of that energy use in virtually all member states, accounting for 67% at the level of EU-15 till 2005.The current project focuses on the space heating and cooling aspects, proposing a solution beyond the existing wireless based HVAC cont ...
Read Project

 6

 FINISHED 
The principal aim of FloodProBE is to provide cost-effective means for the flood protection and damage mitigation in urban areas. To this end, FloodProBE will develop, test and disseminate technologies, methods, concepts and tools for risk assessment and mitigation, focussing particularly on the adaptation of new and existing buildings (retrofitting) and on infrastructure networks. The three main ...
Read Project

 15

 FINISHED 
The overall objective of E3SoHo project is to implement and demonstrate in 3 Social Housing pilots an integrated and replicable ICT-based solution which aims to bring about a significant reduction of 25% of energy consumption in European social housing by:-providing tenants with feedback on consumption and offering personalised advice for improving their energy efficiency-reducing the energy consu ...
Read Project

 11

 FINISHED 
The overall objective of OPEN HOUSE is to develop and to implement a common European transparent building assessment methodology, complementing the existing ones, for planning and constructing sustainable buildings by means of an open approach and technical platform. OPEN HOUSE will develop a transparent approach able to emerge collectively in an open way across the EU. This approach will be commu ...
Read Project

 20

 FINISHED 
Polymer based manufactured components for construction applications have been designed, developed and demonstrated in European projects such as HP FUTURE-Bridge, SAFEFLOOR and MEGAWIND. The results are very promising regarding customer requirements, quality, technical and economical feasibility and the favourable impact of using this kind of composite-based components in terms of sustainability, s ...
Read Project

 19

 FINISHED 
Recent work has shown the possibility to drastically increase the reflection performance of the building envelop, using nanotechnologies. Standard metal oxides are already known for their solar reflection properties, but latest developments identified that nanotechnologies can improve Index of Reflectance from an average of 0,35 to 0,85 because of their effectiveness on Near Infrared wavelengths, ...
Read Project

 14

 FINISHED 
The objective of EnPROVE is to develop a software model for predicting the energy consumption of a specific building, with different scenarios implementing energy-efficient technologies and control solutions, based on actual measured performance and usage data of the building itself.The key hypothesis of EnPROVE is that it is possible, from adequate gathering and assessing data on how a structure ...
Read Project

 9

 FINISHED 

Multi-source Energy Storage System Integrated in Buildings (MESSIB)

Start date: Mar 1, 2009, End date: Feb 28, 2013,

The overall objective of MESSIB is the development, evaluation and demonstration of an affordable multi-source energy storage system (MESS) integrated in building, based on new materials, technologies and control systems, for significant reduction of its energy consumption and active management of the building energy demand. This new concept will reduce and manage smartly the electrical energy req ...
Read Project

 24

 FINISHED 
ICT 4 E2B Forum is aimed at bringing together all relevant stakeholders involved in ICT systems and solutions for Energy Efficiency in Buildings, at identifying and reviewing the needs in terms of research and systems integration as well as at accelerating implementation and take-up.ICT 4 E2B Forum intends to promote, through community building activities, a better understanding, a closer dialogue ...
Read Project

 7