Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

QuantERA ERA-NET Cofund in Quantum Technologies (QuantERA)

Start date: Nov 1, 2016, End date: Oct 31, 2021,

QuantERA ERA-NET Cofund in Quantum TechnologiesQuantum Technologies (QT) has become a new and fast developing area of research initiated by a realisation that quantum physics opens up radically new modes of quantum information processing and communication. European researchers have been at the forefront of these developments delivering many groundbreaking scientific results and advancing technolog ...
Read Project

 31

 FINISHED 

GaN densily integrated with Si-CMOS for reliable, cost effective high frequency power delivery systems (GaNonCMOS)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

Power electronics is the key technology to control the flow of electrical energy between source and load for a wide variety of applications from the GWs in energy transmission lines, the MWs in datacenters that power the internet to the mWs in mobile phones. Wide band gap semiconductors such as GaN use their capability to operate at higher voltages, temperatures, and switching frequencies with gr ...
Read Project

 11

 FINISHED 

Water Works 2016-2020 in Support of the Water JPI (WaterWorks2015) - Sustainable water use in agriculture, to increase water use efficiency and reduce soil and water pollution (WaterWorks2015)

Start date: Jan 1, 2016, End date: Dec 31, 2020,

The WaterWorks2015 proposal responds to the Horizon 2020 (H2020) Societal Challenge 5 2015 Call topic Water-3 [2015]: Stepping up EU research and innovation cooperation in the water area.WaterWorks2015 aims at pooling resources from the 32 participating research programme owners / managers of 23 countries to implement a joint call for proposals, with EU co-funding in the area of sustainable water ...
Read Project

 31

 FINISHED 

Fishfriendly Innovative Technologies for Hydropower (FIThydro)

Start date: Nov 1, 2016, End date: Oct 31, 2020,

FIThydro addresses the decision support in commissioning and operating hydropower plants (HPP) by use of existing and innovative technologies. It concentrates on mitigation measures and strategies to develop cost-efficient environmental solutions and on strategies to avoid individual fish damage and enhancing population developments. Therefore HPPS all over Europe are involved as test sites. The f ...
Read Project

 26

 FINISHED 

Optimised Real-world Cost-Competitive Modular Hybrid Architecture for Heavy Duty Vehicles (ORCA)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

The ORCA Project proposal addresses topic GV-03-2016, of the Transport Work Programme. The work proposed will, in a single coordinated project, address all the aspects of the domain 2 “For pure and plug-in hybrids, power-train system integration and optimisation through the re-use of waste heat, advanced control, downsizing of ICEs, innovative transmissions and the integration of electronic compon ...
Read Project

 11

 FINISHED 

SPECTORS

Start date: Sep 1, 2016, End date: Aug 31, 2020,

SPECTORS is een Nederlands-Duits Hightech initiatief dat het marktpotentieel van civiele dronetechnologie ontsluit door sensorinnovaties ten behoeve van remote-sensing en –monitoring. De civiele markt voor het gebruik van drones en de hieraan verbonden sensortechnologie voor remote-sensing, remote-monotoring, filmproductie en landbouw is immens. Het US-portaal Business Insider schat het marktpote ...
Read Project

 31

 FINISHED 

HOLIstic optimisation of SHIP design and operation for life cycle (HOLISHIP)

Start date: Sep 1, 2016, End date: Aug 31, 2020,

Most maritime products are typically associated with large investments and are seldom built in large series. Where other modes of transport benefit from the economy of series production, this is not the case for maritime products which are typically designed to refined customer requirements increasingly determined by the need for high efficiency, flexibility and low environmental impact at a compe ...
Read Project

 39

 FINISHED 

BRIdges the GAp for Innovations in Disaster resilience (BRIGAID)

Start date: May 1, 2016, End date: Apr 30, 2020,

Recent studies from the IPCC indicate that Europe is particularly prone to increased risks of river and coastal floods, droughts resulting in water restrictions and damages from extreme weather such as heat events and wildfires. Evaluations also show a huge potential to reduce these risks with novel adaptation strategies. Researchers, innovators and incubators develop innovative products and servi ...
Read Project

 24

 FINISHED 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Start date: Oct 1, 2016, End date: Mar 31, 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Read Project

 15

 FINISHED 

Analysis System for Gathered Raw Data (ASGARD)

Start date: Sep 1, 2016, End date: Feb 29, 2020,

ASGARD has a singular goal, contribute to Law Enforcement Agencies Technological Autonomy and effective use of technology. Technologies will be transferred to end users under an open source scheme focusing on Forensics, Intelligence and Foresight (Intelligence led prevention and anticipation). ASGARD will drive progress in the processing of seized data, availability of massive amounts of data and ...
Read Project

 34

 FINISHED 

PROMOTioN - Progress on Meshed HVDC Offshore Transmission Networks (PROMOTION)

Start date: Jan 1, 2016, End date: Dec 31, 2019,

In order to unlock the full potential of Europe’s offshore resources, network infrastructure is urgently required, linking off-shore wind parks and on-shore grids in different countries. HVDC technology is envisaged but the deployment of meshed HVDC offshore grids is currently hindered by the high cost of converter technology, lack of experience with protection systems and fault clearance componen ...
Read Project

 35

 FINISHED 

Energy for Smart Objects (EnSO)

Start date: Jan 1, 2016, End date: Dec 31, 2019,

The goal of EnSO is to develop and consolidate a unique European ecosystem in the field of autonomous micro energy sources (AMES) supporting Electronic European industry to develop innovative products, in particular in IoT markets. In summary, EnSO multi-KET objectives are:• Objective 1: demonstrate the competitiveness of EnSO energy solutions of the targeted Smart Society, Smart Health, and Smart ...
Read Project

 36

 FINISHED 

wer-to-fleX (Power-to-fleX)

Start date: Apr 1, 2016, End date: Oct 30, 2019,

In Noordwest-Duitsland en Noord-Nederland is de afgelopen jaren volop ingezet op duurzame energie. Het nadeel van zon en wind als energiebron is dat het aanbod ervan fluctueert en niet gelijk loopt met de energievraag. Het bufferen van deze elektriciteit (Power) in een andere energiedrager, zoals water-stofgas, methaan, methanol, warmte of batterij (X) is een oplossing voor dit probleem. Het doel ...
Read Project

 19

 FINISHED 

ENgineering COMPASS (ENCOMPASS)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

The ENCOMPASS project principally aims to create a fully digital integrated design decision support (IDDS) system to cover the whole manufacturing chain for a laser powder bed fusion (L-PBF) process encompassing all individual processes within in. The ENCOMPASS concept takes a comprehensive view of the L-PBF process chain through synergising and optimising the key stages. The integration at digita ...
Read Project

 11

 FINISHED 

MOdel based coNtrol framework for Site-wide OptmizatiON of data-intensive processes (MONSOON)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

The MONSOON vision is to provide Process Industries with dependable tools to help achieving improvements in the efficient use and re-use of raw resources and energy.MONSOON aims at establishing a data-driven methodology supporting the exploitation of optimization potentials by applying multi-scale model based predictive controls in production processes.MONSOON features harmonized site-wide dynamic ...
Read Project

 11

 FINISHED 

Polygon scanner based ultra-short pulse laser processing in roll-to-roll manufacturing (PoLaRoll)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

Roll-to-roll manufacturing is well established in many segments like electronics, micro manufacturing or solar technology. Continuous roll-to-roll manufacturing processes can be integrated with various manufacturing steps within the production line. While many conventional and laser manufacturing techniques could already be embedded successfully into roll-to-roll machines, pulsed laser structuring ...
Read Project

 7

 FINISHED 

Smart and adaptive interfaces for INCLUSIVE work environment (INCLUSIVE)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

The market demands flexible productions lead to complexification of production systems and hence to more articulated Human Machine Interface (HMI). This new features tend to exclude from working environment elderly people who, even if they have a great experience, feel uncomfortable in the interaction with a complex computerized system. Moreover, complex HMI creates a barrier to young inexperience ...
Read Project

 11

 FINISHED 

Intelligent Innovative Smart Maintenance of Assets by integRated Technologies (IN2SMART)

Start date: Sep 1, 2016, End date: Aug 31, 2019,

IN2SMART represents the 1st proposal of the Shift2Rail members referred, according to MAAP, to the following Technology Demonstrators (TDs): TD3.7 Railway Information Measuring and Monitoring System (RIMMS), TD3.6 Dynamic Railway Information Management System (DRIMS) and TD3.8 Intelligent Asset Management Strategies (IAMS). These TDs will deploy an overall concept for Intelligent Asset Management ...
Read Project

 22

 FINISHED 

Next generation urban mining - Automated disassembly, separation and recovery of valuable materials from electronic equipment (ADIR)

Start date: Sep 1, 2015, End date: Aug 31, 2019,

Specific raw materials become increasingly important to manufacture high level industrial products. Especially electronic equipment contains precious metals and a series of strategic raw materials. To date the material specific recycling is focused on mass stream concepts such as shredder processes and metallurgy to extract the high-value metallic constituents, i.e. copper, gold, silver. However, ...
Read Project

 10

 FINISHED 

LNG PILOTS

Start date: Jan 15, 2016, End date: Jun 30, 2019,

De introductie van LNG als nieuwe brandstof en energiebron voor de industrie brengt een onder-zoeks- en ontwikkelingsbehoefte met zich mee. Investeringen op dit gebied zullen de kwaliteit van de regionaal gevestigde onderzoeksinstellingen ten goede komen en de vestiging van hoogwaardige technologische ondernemingen op het gebied van logistiek, voertuigbouw, scheepsbouw, energietechniek en energiev ...
Read Project

 36

 FINISHED 

Net-shape joining technology to manufacture 3D multi-materials components based on metal alloys and thermoplastic composites (ComMUnion)

Start date: Dec 1, 2015, End date: May 31, 2019,

ComMUnion enables productive and cost effective manufacturing of 3D metal/ Carbon Fibre Reinforced Thermoplastic (CFRT) multi-material components.ComMUnion will develop a novel solution combining tape placement of CFRTs with controlled laser-assisted heating in a multi-stage robot solution. High-speed laser texturing and cleaning will overcome the limitations of current joining technology to provi ...
Read Project

 15

 FINISHED 

Rf Engineered substrates to FostER fEm performaNCE (REFERENCE)

Start date: Dec 1, 2015, End date: May 31, 2019,

The REFERENCE project aims to leverage a European leading edge Radio Frequency (RF) ecosystem based on RF Silicon On Insulator (SOI) disruptive technology, perceived as the most promising to address performance, cost and integration needs for RF Front End Modules (FEMs)s.The project targets to develop over the next 3 years, innovative solutions from material, engineered substrates, process, design ...
Read Project

 18

 FINISHED 

European Initiative to Enable Validation for Highly Automated Safe and Secure Systems (ENABLE-S3)

Start date: May 1, 2016, End date: Apr 30, 2019,

ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Read Project

 76

 FINISHED 

Competitive SolAr Power Towers – CAPTure (CAPTure)

Start date: May 1, 2015, End date: Apr 30, 2019,

The main objective of this project is to significantly reduce costs of concentrated solar power, in order to pave the way for its deserved competitiveness on the power market. Specifically, the solar-to-electric conversion efficiency of the plant will be improved by increased receiver operating temperatures as well as an innovative power cycle configuration also providing advantages regarding plan ...
Read Project

 16

 FINISHED 

Symbiotic Human-Robot Collaborative Assembly: Technologies, Innovations and Competitiveness (SYMBIO-TIC)

Start date: Apr 1, 2015, End date: Mar 31, 2019,

The European robotics industry is moving towards a new generation of robots, based on safety in the workplace and the ability to work alongside humans. This new generation is paramount to making the factories of the future more cost-effective and restoring the competitiveness of the European manufacturing industry. However, the European manufacturing industry is facing the following challenges: (1 ...
Read Project

 18

 FINISHED 

Detecting and ANalysing TErrorist-related online contents and financing activities (DANTE)

Start date: Sep 1, 2016, End date: Feb 28, 2019,

Money underpins all terrorist activities (without money propaganda, training, recruitment, and support are less effective or null). The disruption of terrorist financing activity is a key element in any fight against terrorism.DANTE will deliver effective, efficient and automated data mining, analytics solutions and an integrated system to detect, retrieve, and analyse huge amounts of heterogeneou ...
Read Project

 18

 FINISHED 

Turning waste from steel industry into a valuable low cost feedstock for energy intensive industry (RESLAG)

Start date: Sep 1, 2015, End date: Feb 28, 2019,

The RESLAG project proposal is aligned with the challenges outlined in the call WASTE-1-2014: Moving towards a circular economy through industrial symbiosis. In 2010, the European steel industry generated, as waste, about 21.8 Mt of steel slag. The 76 % of the slag was recycled in applications such as aggregates for construction or road materials, but these sectors were unable to absorb the total ...
Read Project

 22

 FINISHED 

A novel process for manufacturing complex shaped Fe-Al intermetallic parts resistant to extreme environments (EQUINOX)

Start date: Feb 1, 2016, End date: Jan 31, 2019,

There is a need to find solutions to replace Critical Raw Materials (CRMs) such as Chromium, Nickel, Molybdenium and Vanadium in high volume end consumer products. Steels and superalloys with considerable amounts of these CRMs are widely used in many industrial applications, particularly under extreme conditions where corrosion and wear resistance are needed. It is generally accepted, that interme ...
Read Project

 11

 FINISHED 

Energy and economic efficiency for today’s smart communities through integrated multi storage technologies (NETFFICIENT)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

The project will deploy and demonstrate local storage technologies which have reached TRL 5-6 in a real electrical grid, and will develop ICT tools to exploit the synergies between them, the smart grid and the citizens. The demonstration in this real environment will be driven by five use cases covering low voltage and medium voltage scenarios and a wide range of applications and functionalities. ...
Read Project

 14

 FINISHED 

Flexible and Mobile Economic Processing Technologies (FAME)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

FAME aims to increase the competiveness of the mining of European mineral resources and to stimulate more private engagement and investment and thus business development with the potential to maintain and create high quality jobs within the EU28. The focus and a principal aim is to enhance mineral processing and mining skills within Europe. A medium to long term aim is to reduce the reliance of Eu ...
Read Project

 18

 FINISHED 

MinWaterCSP - Minimized water consumption in CSP plants (MinWaterCSP)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

MinWaterCSP addresses the challenge of significantly reducing the water consumption of CSP plants while maintaining their overall efficiency. Its objective is to reduce evaporation losses and mirror cleaning water usage for small- and large-scale CSP plants through a holistic combination of next generation technologies in the fields of i) hybrid dry/wet cooling systems ii) wire structure heat tran ...
Read Project

 12

 FINISHED 

Flexible production cell for Hybrid Joining (FlexHyJoin)

Start date: Oct 1, 2015, End date: Dec 31, 2018,

Multimaterial systems combining metals with thermoplastic fiber reinforced polymer composites (TP-FRPC) are the key for light weight design in the automotive industry. However, the joining of the material partners remains main issue. Currently, no approach exists which sufficiently meets the three core requirements: weight neutrality, cost- and time efficiency and bonding strength. Technologies li ...
Read Project

 10

 FINISHED 

Bringing FIWARE to the NEXT step (FI-NEXT)

Start date: Dec 1, 2016, End date: Nov 30, 2018,

Digital technologies underpin innovation and competitiveness across a broad range of market sectors. A key technology to boost such innovation and competitiveness is represented by the full and wide adoption of Open Service Platforms. In fact, they will allow increased competition and market penetration because they should be built on top of royalty-free open specifications, adopting open source r ...
Read Project

 16

 FINISHED 

Business Experiments in Cyber Physical Production Systems (BEinCPPS)

Start date: Nov 1, 2015, End date: Oct 31, 2018,

BEinCPPS Innovation Action aims to integrate and experiment a CPS-oriented Future Internet-based machine-factory-cloud service platform firstly intensively in five selected Smart Specialization Strategy Vanguard regions (Lombardia in Italy, Euskadi in Spain, Baden Wuertemberg in Germany, Norte in Portugal, Rhone Alpes in France), afterwards extensively in all European regions, by involving local c ...
Read Project

 23

 FINISHED 

Securing Critical Energy InfrastructuresSUCCESS - Securing Critical Energy Infrastructures (SUCCESS)

Start date: May 1, 2016, End date: Oct 31, 2018,

Living in a safe and secure society is a fundamental human need. The security of critical infrastructures must be maintained so that supplies of power, water or other resources are secured. Modern critical infrastructures are increasingly complex and they are turning into Cyber-Physical Infrastructures because ICT is growing in importance in infrastructure management.The SUCCESS project will dev ...
Read Project

 19

 FINISHED 

Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling 2 (Fortissimo 2)

Start date: Nov 1, 2015, End date: Oct 31, 2018,

Fortissimo 2 will drive the uptake of advanced modelling, simulation and data analytics by European engineering and manufacturing SMEs and mid-caps. Such an uptake will deliver improved design processes, better products and services, and improved competitiveness. For the European Union as a whole this means improved employment opportunities and economic growth.The importance of advanced ICT to the ...
Read Project

 38

 FINISHED 

MIND

Start date: Jul 31, 2015, End date: Aug 31, 2018,

Zowel in Duitsland als in Nederland is de Life Science & Health sector een innovatieve sector met veel groeipotentieel voor de toekomst. Daarbij heeft de zorg ook te maken met grote maatschappelijke uitdagingen. Denk bijvoorbeeld aan de vergrijzing en nieuwe ziektebeelden. In het Duits- Nederlandse grensgebied is veel kennis op het gebied van Life Science & Health. Er zijn in beide landen verschil ...
Read Project

 29

 FINISHED 

adaptive model-based Control for laser-assisted Fibre-reinforced tape winding (ambliFibre)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

ambliFibre will develop and validate the first intelligent model-based controlled laser-assisted tape winding system for fibre-reinforced thermoplastic (FRP) components. This system will include optical non-contact monitoring and innovative Human-Machine-Interfaces, which are easily manageable for the worker. Based on thermal and optical models embedded into integral process simulation tools combi ...
Read Project

 12

 FINISHED 

JOINing of copper to aluminium by ElectroMagnetic fields (JOIN-EM)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

Global trends force industry to manufacture lighter, safer, more environmentally-friendly, more performant, and cheaper products. Due to its excellent thermal and electrical conductivity, copper is widely used in heating and cooling equipment and electrical devices. The rising demand caused the copper price to increase significantly.Solving the conflict between the technological benefits arising f ...
Read Project

 15

 FINISHED 

Computer Aided Technologies for Additive Manufacturing (CAxMan)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

The objectives of Computer Aided Technologies for Additive Manufacturing (CAxMan) are to establish Cloud based Toolboxes, Workflows and a One Stop-Shop for CAx-technologies supporting the design, simulation and process planning for additive manufacturing. More specifically the objectives are to establish analysis-based design approaches with the following aims:-To reduce material usage by 12% thro ...
Read Project

 13