22 European Projects Found
Searched on 125080 European Projects
FINISHED
Holistic Innovative Solutions for an Efficient Recycling and Recovery of Valuable Raw Materials from Complex Construction and Demolition Waste (HISER)
Start date: Feb 1, 2015, End date: Jan 31, 2019,
EU28 currently generates 461 million tons per year of ever more complex construction and demolition waste (C&DW) with average recycling rates of around 46%. There is still a significant loss of potential valuable minerals, metals and organic materials all over Europe.The main goal of HISER project is to develop and demonstrate novel cost-effective technological and non-technological holistic solut ...
Read Project
29
Partners Participants
FINISHED
PERMETTRE AUX JEUNES EN FORMATION PAR ALTERNANCE DE S'IMMERGER PROFESSIONNELLEMENT DANS UN PAYS EUROPEENACCOMPAGNER LES PROFESSIONNELS A VIVRE UNE MOBILITE EUROPEENNE POUR MIEUX APPREHENDER UNE MISSION D'ENSEIGNEMENT OU UNE IMMERSION EN ENTREPRISE
Start date: Jun 1, 2016, End date: May 31, 2018,
ENABLE STUDENTS IN AN ALTERNATING SYSTEM TO GET A PROFESSIONAL IMMERSION IN A EUROPEAN COUNTRYThe Regional Federation of MFR (FRMFR) in Brittany undertakes, in its mission of facilitating networks, 13 MFR located throughout the Breton territory. The 220 young people involved in the Erasmus + program will go to 15 different countries: Romania, Malta, Denmark, Ireland, Latvia, Sweden, Poland, Portug ...
Read Project
78
Partners Participants
FINISHED
"""2nd Generation Active Wing“ – Active Flow- Loads & Noise control on next generation wing" (AFLONEXT)
Start date: Jun 1, 2013, End date: May 31, 2018,
AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Read Project
41
Partners Participants
FINISHED
Affordable and Adaptable Public Buildings through Energy Efficient Retrofitting (A2PBEER)
Start date: Sep 1, 2013, End date: Aug 31, 2017,
Buildings consume about 40% of total final energy in Europe, and those built before 1980 represent 95% of this energy consumption. The low renovation rate of building stock (1% per year) means that boosting energy efficient buildings’ retrofitting is the only way to reach EU’s “20-20-20” targets. The higher impact will be achieved through interventions in non-residential buildings, as their energy ...
Read Project
22
Partners Participants
FINISHED
LOw COst Manufacturing and Assembly of Composite and Hybrid Structures (LOCOMACHS)
Start date: Sep 1, 2012, End date: Aug 31, 2016,
The continued use of composite materials in the aerospace industry has been addressed in several past research projects which have focused on new design solutions and composite manufacturing processes. However an area which has been given much less attention up until now is how to achieve a time and cost effective lean assembly production system. The current airframe assembly process of composite ...
Read Project
33
Partners Participants
FINISHED
PERMETTRE LA MOBILITE DES JEUNES PAR UNE VALORISATION DES COMPETENCES ACQUISES GRACE AUX APPRENTISSAGES REALISES AU SEIN DE L’ESPACE EUROPEEN RENFORCER ET ENRICHIR LES PRATIQUES PROFESSIONNELLES DES EQUIPES ENGAGEES DANS UNE OUVERTURE A L'EUROPE
Start date: Jul 1, 2014, End date: Jun 30, 2016,
ALLOW THE YOUTH MOBILITY BY UPGRADING SKILLS ACQUIRED THROUGH LEARNING MADE WITHIN THE EUROPEAN SPACE
The Regional Federation of MFR (FRMFR) in Brittany undertakes, in its mission of facilitating networks, eight MFR located throughout the Breton territory. The 161 young people involved in the Erasmus + program will go to twelve different countries: Switzerland, Ireland, Spain, Sweden, Poland, Port ...
Read Project
165
Partners Participants
FINISHED
Low Embodied Energy Advanced (Novel) Insulation Materials and Insulating Masonry Components for Energy Efficient Buildings (LEEMA)
Start date: Jan 1, 2012, End date: Dec 31, 2015,
A review of the embodied energy values of the various building materials shows that the embodied energy of the most widely used insulation materials in construction applications is characterised by very high values. This mainly results either from the energy intensive conditions applied for the manufacturing of the mineral based insulation materials or from the high embodied energies of the oil-ba ...
Read Project
15
Partners Participants
FINISHED
Smart Intelligent Aircraft Structures (SARISTU)
Start date: Sep 1, 2011, End date: Aug 31, 2015,
The project proposal concerns the challenges posed by the physical integration of smart intelligentstructural concepts. It addresses aircraft weight and operational cost reductions as well as animprovement in the flight profile specific aerodynamic performance.This concerns material concepts enabling a conformal, controlled distortion of aerodynamicallyimportant surfaces, material concepts enablin ...
Read Project
68
Partners Participants
FINISHED
nSafety Certification of Software-Intensive Systems with Reusable Components (nSafeCer)
Start date: Apr 1, 2012, End date: Mar 31, 2015,
...ase European industry competitiveness and pave the way for a cross-domain market for components qualified for certification.The main industrial domains targeted in nSafeCer are aerospace, automotive, construction equipment and railway. Other domains such as health care and cross-domain aspects will also be considered.nSafeCer builds on the 2 year ARTEMIS pilot project pSafeCer launched in April 20 ...
Read Project
31
Partners Participants
FINISHED
lar Wind (Polar Wind)
Start date: Jul 31, 2012, End date: Nov 29, 2014,
Project activities will contribute to transferring from fossil fuels to alternative local energy sources (wind) in Nenets Autonomous District. The project will create wind-monitoring infrastructure in the territory of Nenets Autonomous Okrug, incl. wind monitoring equipment and complex of ICT tools to collect, analyze and manage the received data. This is indispensible for the next step of instal ...
Read Project
4
Partners Participants
FINISHED
Rail Hub Cities for South East Europe (RAIL4SEE)
Start date: Apr 30, 2012, End date: Oct 30, 2014,
The challenge that the RAIL4SEE partners share is the development of models, concepts, measures, harmonised strategies and policy actions targeted to the improvement of rail and intermodal transport in SEE. In particular partners call for complementary interventions facing the alleviation of barriers for rail hubs integration in the local, regional, transnational and TEN-T systems, transport servi ...
Read Project
28
Partners Participants
FINISHED
Green Intermodal Freight Transport (GIFT)
Start date: Feb 29, 2012, End date: Aug 30, 2014,
The main aim of the current project is to map, analyze, and evaluate the status of the transport sector in the GIFT transport network and propose new policies and strategies in infrastructure, processes, assets, ICT, legislation, norms and harmonization/ standardization issues, in order to promote innovative green intermodal freight transport corridors. GIFT project will drill down in three Pan-Eu ...
Read Project
27
Partners Participants
FINISHED
pSafety Certification of Software-intensive Systems with Reusable Components (pSafeCer)
Start date: Apr 1, 2011, End date: Sep 30, 2013,
...pSafeCer is targeting increased efficiency and reduced time-to-market by composable safety certification of safety-relevant embedded systems. The industrial domains targeted are within automotive and construction equipment, avionics, and rail. pSafeCer will also develop certification guidelines and a training example for other domains, thus considerably increasing its market impact.A primary objec ...
Read Project
24
Partners Participants
FINISHED
OPEN HOUSE - Benchmarking and mainstreaming building sustainability on the EU based on transparency and openness (open source and availability) from model to implementation (OPEN HOUSE)
Start date: Feb 1, 2010, End date: Jul 31, 2013,
The overall objective of OPEN HOUSE is to develop and to implement a common European transparent building assessment methodology, complementing the existing ones, for planning and constructing sustainable buildings by means of an open approach and technical platform. OPEN HOUSE will develop a transparent approach able to emerge collectively in an open way across the EU. This approach will be commu ...
Read Project
20
Partners Participants
FINISHED
An intelligent modular domestic heating and hot water platform that enables effective integration and use of renewable energy systems (SmartHeat)
Start date: Jan 1, 2010, End date: Jan 31, 2013,
We the SME AGs, represent the European SMEs involved in the design, manufacture and installation of heating, hot water and renewable energy systems (RES). Increasing the uptake of RES is crucial if Europe is to achieve ambitious energy and emission reduction targets. However, despite steep increases in energy prices the uptake of domestic RES is still very limited. The initial investment required ...
Read Project
14
Partners Participants
FINISHED
"Supporting the roofing SMEs in the development and use of a new generation of roofing materials applicable with fault tolerant procedures, reducing the use of petroleum-based products" (NU-ROOF)
Start date: Jan 1, 2010, End date: Dec 31, 2012,
"One of the most important and costly operations in the construction and maintenance of a building is the insulation of the roof. Current materials used in the application procedures for waterproofing are applied with heat, locally melting the edges to create a continuous impermeable layer. This procedure highly depends on the operators’ skills and it is prone to error and potential leakages. It ...
Read Project
15
Partners Participants
FINISHED
Power Optimised Ship for Environment with Electric Innovative Designs ON board (POSE²IDON)
Start date: Jan 1, 2009, End date: Dec 31, 2012,
"The electric ship concept offers many benefits; among other aspects if offers flexibility of control and effectiveness of power transmission. But predominantly it enables higher energy conversion efficiency by ensuring that prime movers are effectively loaded at all times and across all operating conditions. This dominating advantage cannot be matched by mechanical transmission systems because ge ...
Read Project
34
Partners Participants
FINISHED
"THE DEVELOPMENT OF SELECTED HAZARDOUS WASTES UTILIZATION TECHNOLOGIES, BASED ON MICROWAVE THERMAL TREATMENT (MTT) METHOD" (AMIANTE)
Start date: Oct 1, 2008, End date: Sep 30, 2010,
"The widespread use of asbestos in building materials and other applications up until the 1990s has created a severe problem for the European community in terms of adequately mitigating the asbestos risk, and there are a number of reasons for acting now. Firstly, the drive to remove asbestos-containing materials from public buildings is growing. The 1999 EU Landfill Directive with its mandatory tr ...
Read Project
12
Partners Participants
FINISHED
CSI - Creating a Setting for Investment (CSI)
Start date: Jan 5, 2003, End date: Jun 29, 2008,
The objective of this 6.2 M euro project is to look at how environmental improvements can make metropolitan areas more attractive for investment, with knock on benefits for sustainable development across NW Europe. The four project partners, all regions at different stages of recovery from industrial decline, aim to address issues such as urban sprawl and the unequal competition between metropolit ...
Read Project
6
Partners Participants
FINISHED
KArst waTER research programme (KATER II)
Start date: Dec 31, 2002, End date: Dec 30, 2006,
In many countries of CADSES karstic areas are important and acutely essential for public water supply. These areas are at the same time highly sensitive and valuable natural environments. Conversely, exploitation pressure on these areas is increasing. This mainly relates to such fields as tourism, settlements, transport infrastructure, forestry and pasture management. The project aims at safeguard ...
Read Project
8
Partners Participants
FINISHED
Das Projekt ist auf die Unterstützung von SMEs durch Ausbildung in strategischer Planung und insbesondere durch die Förderung der Zusammenarbeit mit anderen Unternehmen zugeschnitten. Ein wichtiges Ziel ist SMEs wettbewerbsfähig zu halten bzw. zu machen. Großunternehmen haben einen Vorsprung aufgrund ihrer Versorgungsketten welche SMEs nicht besitzen. Um sich im Wettbewerb zu behaupten, können SME ...
Read Project
10
Partners Participants
FINISHED
Currently, some 50 % of world citizens live in cities or urban contexts and according to many researchers this figure will continue to rise in coming years. Thus people's need for living areas such as house, shopping centers, parks, work places and etc. will increase in near future. For this reason, cities are witnessing a unique period of growth that leads to a number of questions: Where will the ...
Read Project
