Search for European Projects

20 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Safeguarding Cultural Heritage through Technical and Organisational Resources Management (STORM)

Start date: Jun 1, 2016, End date: May 31, 2019,

Starting from previous research experiences and tangible outcomes, STORM proposes a set of novel predictive models and improved non-invasive and non-destructive methods of survey and diagnosis, for effective prediction of environmental changes and for revealing threats and conditions that could damage cultural heritage sites. Moreover, STORM will determine how different vulnerable materials, struc...
Read Project

 20

 FINISHED 

Technology Innovation for the Local Scale, Optimum Integration of Battery Energy Storage (TILOS)

Start date: Feb 1, 2015, End date: Jan 31, 2019,

TILOS aims to demonstrate the optimal integration of local scale energy storage in a fully-operated, smart island microgrid that will also communicate with a main electricity grid. The main objective of the project will be the development and operation of a prototype battery storage system, based on NaNiCl2 batteries, provided with an optimum, real-environment smart grid control system and coping ...
Read Project

 17

 FINISHED 

Welding of E-Textiles for Interactive Clothing (ETexWeld)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

The new field of science dealing with implementation of electronics to textiles in combination with informatics is known as e-textiles. This project proposal leads to knowledge transfer among partners in order to develop innovative e-textile products for interactive protective clothing and footwear using welding technologies by bringing experts from different countries, sectors and disciplines tog...
Read Project

 8

 FINISHED 

Establishment of Centers for Competence and Employability Development

Start date: Oct 15, 2015, End date: Oct 14, 2018,

In Kazakhstan and Russia the term “employability” is not listed in official documentation, such as legal regulations, reforms etc; not formulated as an strategic goal of the universities; not framed as an concept including a set of competences, skills and attitudes and no practical instruction or recommendations on how to implement it is given. Universities in KZ and PF are obliged to include cert...
Read Project

 12

 FINISHED 

TRusted, CItizen - LEA coILaboratIon over sOcial Networks (TRILLION)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

Community policing promotes the implementation of bi-directional collaboration channels between citizens and Law Enforcement Agencies (LEAs). By enhancing the discovery of relevant and up to date information, it speeds up the detection of risks, eases their prevention and builds a continuum of collaboration which motivates citizens and LEAs to work together.Over 36 months, TRILLION - TRusted, CIti...
Read Project

 13

 FINISHED 

Project for higher education student and staff mobility between Programme Countries and Partner Countries

Start date: Jun 1, 2016, End date: May 31, 2018,

This is a project for higher education student and staff mobility between Programme Countries and Partner Countries. Please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2016, End date: Sep 30, 2017,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Textile and Clothing Knowledge Alliance. Future textile and clothing managers for export, marketing, innovation, sustainability and entrepreneurship oriented companies.

Start date: Dec 1, 2014, End date: Nov 30, 2016,

This Knowledge Alliance aims at modernising EU’s higher education systems in the field of textiles and clothing (T&C) through a better anticipation of skill needs, based on development of sustainable partnerships between education and employment. This Alliance will result in a facilitated sector adaptation during crisis processes through a better anticipation and positive management of change, via...
Read Project

 14

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2015, End date: Sep 30, 2016,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Reinforcing cooperation with Eastern Partnership countries on bridging the gap between research and innovation for inclusive and secure societies (SECURE-R2I)

Start date: Oct 1, 2013, End date: Sep 30, 2016,

"The overall aim of the SECURE-R2I project is to reinforce cooperation with Eastern Partnership Countries (EPC) on bridging the gap between research and innovation for Horizon 2020 Societal Challenge 6. “Inclusive, Innovative and Secure Societies”. The research domains encompassed by “Inclusive, Innovative and Secure Societies” are broad. From the perspective of FP7 thematic priorities, they inclu...
Read Project

 12

 FINISHED 

Safe control of non cooperative vehicles through electromagnetic means (SAVELEC)

Start date: Jan 1, 2012, End date: Jun 30, 2016,

"SAVELEC aims to provide a solution for the external, safe control of a non cooperative vehicle without any consequences on the persons inside the vehicle or other persons and objects nearby. The proposed solution is based on the use of electromagnetic means, electromagnetic pulses (EMP) and high power microwaves (HPM), in order to disrupt the proper behaviour of the electronic components inside t...
Read Project

 10

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2014, End date: Sep 30, 2015,

In the framework of the Erasmus+ Programme, Piraeus University of Applied Sciences (former Technological Educational Institute of Piraeus, Erasmus code G EGALEO01) was awarded the Grant - no. 2014-1-EL01-KA103-000059- for Higher Education Student and Staff Mobility (KA1) for the academic year 2014-2015 for a total duration of 16 months. The ?bjectives of the University are a) the continuous impr...
Read Project

 1

 FINISHED 

Development of key technology components for high performance electric motors (HPEM)

Start date: Dec 1, 2012, End date: Nov 30, 2014,

"HPEM technological research program proposes the integration of emerging permanent magnet motor and position sensor technologies in high power density, fault tolerant actuator designs which could be an integral part of a rotorcraft swashplate electromechanical actuation system with superior dynamic response and fault ride through capability. Innovative permanent magnet and insulating material tec...
Read Project

 1

 FINISHED 

CReating Innovative Sustainability Pathways (CRISP)

Start date: Mar 1, 2011, End date: Feb 28, 2014,

The core objective of this proposal is to identify potential paths to engaging on an integrated effort to support the transition, to a sustainable, low carbon Europe. The call text places much emphasis of using a scenario and backcasting approach that explicitly discerns individuals, organisations and the collective (societal and economic organisation), addresses the interaction of agency and stru...
Read Project

 7

 FINISHED 

Strengthening sensor research links between the Georgian Technical University and the European Research Area (SENS-ERA)

Start date: Dec 1, 2011, End date: Nov 30, 2013,

"The overall aim of the SENS-ERA project is to integrate the Georgian Technical University (GTU) into the European Research Area (ERA), by developing cooperation with European research and innovation organisations in its 3 strongest research topics:A) Semiconductor based materials for optical sensors;B) Radiation sensor elements based on A4, A3B5, and rare earth semiconductors;C) Novel smart senso...
Read Project

 5

 FINISHED 

Innovative Technological platform for Compact and Reliable Electronic integrated in Actuators and Motors (CREAM)

Start date: Sep 1, 2009, End date: Feb 28, 2013,

"The actual political, environmental and economical trends applied to air transport lead to move in the future to the All Electric Aircraft. The goal of this concept is to eliminate as many hydraulic power sources and complicated circuit of high-pressure hydraulic lines as possible. The CREAM objective is to reach new high performance and reliability capacities of Electro-Mechanical Actuators in ...
Read Project

 15

 FINISHED 

Products of coated textiles (PROCOTEX)

Start date: Aug 1, 2010, End date: Jul 31, 2012,

"In our world today we require the ability deal fairly with global challenges. This can be achieved by opening up of research systems and a free movement of researchers and technologies to accelerate collaboration and to build up strong partnerships. These requirements are also the aim of the 2 years lasting PROCOTEX project. By building up and strengthening an international research network in sm...
Read Project

 2

 FINISHED 

Electric Motor And Sensor design and manufacture (EMAS)

Start date: Apr 1, 2011, End date: Jun 30, 2012,

"EMAS proposes a technological research program enabling to develop, validate and manufacture eight actuators presenting high performance and high reliability for high speed applications under high temperature environment. Such actuators will be capable of producing 5 N.m torque under 10.000 rpm for an environmental temperature of 100 C involving low short circuit current and will be supplied by s...
Read Project

 1

 FINISHED 

ODICIS - One DIsplay for a Cockpit Interactive Solution (ODICIS)

Start date: May 1, 2009, End date: Apr 30, 2012,

"ODICIS project aims at developing a single display cockpit and at studying its concept of use. This addresses three current major aeronautics needs: system architecture flexibility, useful surface optimization and information continuity. Therefore the project will improve the operational safety and efficiency and reduce the aircraft development cost. The first objective is to prove the technical ...
Read Project

 9

 FINISHED 

Development of a Standard Interactive Template for Innovative Training in Textiles (TEMPTEX)

Multi-media gives new dimensions to textile training : A new interactive training structure has been developed for the textiles industry, giving students the opportunity to solve real-life production problems through computer simulations and a wealth of practical information. The package can be adapted to a wide range of users from students through to managers. This project started in 2000 and las...
Read Project

 11