Search for European Projects

16 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Sustainable Low Impact Mining solution for exploitation of small mineral deposits based on advanced rock blasting and environmental technologies (SLIM)

Start date: Nov 1, 2016, End date: Oct 31, 2020,

The main economic, technological and environmental challenges of small mining include reducing high investment costs, reducing generation of waste and large tailings, identifying and addressing environmental impacts, and improving flexibility, automation and safety of operations. However, at the moment, there is no quick-fix available to reduce the environmental impact from mines, and it is neithe...
Read Project

 14

 FINISHED 

EU Training Network for Resource Recovery through Enhanced Landfill Mining (NEW-MINE)

Start date: Sep 1, 2016, End date: Aug 31, 2020,

Europe has somewhere between 150,000 and 500,000 landfill sites, with an estimated 90% of them being “non-sanitary” landfills, predating the EU Landfill Directive of 1999. These older landfills tend to be filled with municipal solid waste and often lack any environmental protection technology. In order to avoid future environmental and health problems, many of these landfills will soon require exp...
Read Project

 12

 FINISHED 

Minerals Policy Guidance for Europe (MIN-GUIDE)

Start date: Feb 1, 2016, End date: Jan 31, 2019,

MIN-GUIDE is a project addressing the need for a secure and sustainable supply of minerals in Europe by developing a ‘Minerals Policy Guide’. The key objectives of the project are (1) providing guidance for EU and MS minerals policy, (2) facilitating minerals policy decision making through knowledge co-production for transferability of best practice minerals policy, and (3) fostering community and...
Read Project

 11

 FINISHED 

Development of ceramic and multi material components by additive manufacturing methods for personalized medical products (CerAMfacturing)

Start date: Oct 1, 2015, End date: Sep 30, 2018,

The cerAMfacturing project will develop a completely new approach for ceramic multi material additive manufacturing which will allow series production of customised and multifunctional components for manifold applications for obtaining property combinations, like electrical conductive/electrical insulating, dense/porous or two-colored components. In five case studies demonstrators for personalized...
Read Project

 11

 FINISHED 

Fast track innovative drilling system for deep geothermal challenges in Europe (ThermoDrill)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

Europe is confronted with significant changes arising from globalisation and the currently political challenges. This means for example based on the latest developments in Ukraine and exceptionally strong European dependency on gas from Russia, deep geothermal energy particularly based on engineered geothermal systems is becoming even more important to care for Europe`s energy security.If deep geo...
Read Project

 10

 FINISHED 

Resource Efficient Production Route for Rare Earth Magnets (REProMag)

Start date: Jan 1, 2015, End date: Dec 31, 2017,

The overall objective of the REProMag project is to develop and validate an innovative, resource-efficient manufacturing route (SDS process) for Rare Earth magnets that allows for the economically efficient production of net-shape magnetic parts with complex structures and geometries, while being 100% waste-free along the whole manufacturing chain. The new Shaping, Debinding and Sintering (SDS) pr...
Read Project

 15

 FINISHED 

Pre-standardisation of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale (ISTRESS)

Start date: Jan 1, 2014, End date: Dec 31, 2016,

"Intrinsic (or residual) stresses, resulting from manufacturing or processing steps, mostly define the performance and limit the lifetime of nanostructured materials, thin films, coatings and MEMS devices.The established techniques for micron-scale measurement of residual stress still have strong limitations, e.g. in terms of spatial resolution, lack of depth sensing, their applicability on non-cr...
Read Project

 16

 FINISHED 

Selective Tape-Laying for Cost-Effective Manufacturing of Optimised Multi-Material Components (Stellar)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

The aim of the Stellar project is to develop the manufacturing process for high-speed placement of carbon, glass and polymer fibre reinforced matrices, in selected locations in a composite structure, to provide the optimum reinforcement, weight and cost profile within a part.The use of composite materials in structural components is becoming well established in a range of applications, and the mat...
Read Project

 11

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2014, End date: May 31, 2016,

Montanuniversitaet Leoben, as a university with fields of study aligned along the raw materials value chain, is currently implementing an internationalization strategy. Within the strategic decisions taken by the university management, it was decided that special focus should be paid to mobilizing students and staff to participate in international mobility schemes, among them ERASMUS+. We are see...
Read Project

 1

 FINISHED 

Enhanced Power Pilot Line - EPPL (EPPL)

Start date: Apr 1, 2013, End date: Mar 31, 2016,

A sustainable and competitive European power semiconductor industry is essential to support the megatrend developments formulated in the Europe 2020 strategy - climate change, energy security, food security, and health and aging population. In practically all these areas, power semiconductors play a vital role. Thus, it is of paramount importance to defend and further extend Europe’s leading posit...
Read Project

 33

 FINISHED 

Coordinating and Leveraging regional knowledge for initiating a Sustainable and optimised EU Waste to Energy Programme (COOLSWEEP)

Start date: Jan 1, 2013, End date: Dec 31, 2015,

COOLSWEEP comprises 5 established research driven triple helix clusters, one cluster under development and a specialist cluster analysis organisation. The clusters have recognised that the newly emerging field of waste-to-energy urgently requires the establishment of a coordinated “smart specialisation strategy‟.The proposed work will compare and contrast the 6 regions to determine the global pict...
Read Project

 11

 FINISHED 

Composing Learning for Artificial Cognitive Systems (CompLACS)

Start date: Mar 1, 2011, End date: Feb 28, 2015,

Description One of the aspirations of machine learning is to develop intelligent systems that can address a wide variety of control problems of many different types. Currently, the technology used to specify, solve and analyse one control problem typically cannot be reused on a different problem. The purpose of CompLACS is to develop a unifi...
Read Project

 9

 FINISHED 

Recovery of Phosphorus from Sewage Sludge and Sewage Sludge Ashes with the thermo-reductive RecoPhos-Process (RECOPHOS)

Start date: Mar 1, 2012, End date: Feb 28, 2015,

Natural phosphate sources low in heavy metals are getting scarce. Containing about 15 mass-% of P2O5, sewage sludge ash can be considered a secondary phosphorus (P-) source. The P-content in the European sewage sludge could currently replace roughly 15% of the phosphate imports into the EU.Hence already for many years, almost decades, it has been tried to recover phosphorus from sewage, sludge and...
Read Project

 11

 FINISHED 

Paleogeography of the Paratethys: Relation to hydrocarbon source rock quality (PARATETHYS)

Start date: Jun 1, 2009, End date: May 31, 2012,

"The Neogene Paratethys successions of Central Europe and the southern Caucasus are considered as important source rocks for hydrocarbons. Due to different regional biostratigraphic stages used for potential source rock successions, paleoenvironmental correlations remain enigmatic and hydrocarbon source rock formation is poorly understood. The goal of this project is to reconstruct the Eocene to M...
Read Project

 2

 FINISHED 

Personal Information Navigator Adapting Through Viewing (PinView)

Start date: Jan 1, 2008, End date: Mar 31, 2011,

Simple search engines have turned out to be successful in text retrieval. This is partly due to advances in algorithms, but additionally because the typical tasks are relatively straightforward as it is possible to come up with a good list of keywords with a reasonable effort. All information needs cannot however be solved with such searches. For the more and more commonly available audio-visual d...
Read Project

 6

 FINISHED 

Transfer of Qualifications and Learning Standards in Plastic Sector Standplast VET

Plastic industry is the fastest growing industry in the whole EU. According to survey analysis, there is no National Occupations or Qualifications Framework created in SR regarding this specific plastic sector. Also, there is no suitable offer of educational activities and this non-systematic approach causes practical impact:- Inability to absorb new knowledge within this specific field from diffe...
Read Project

 7