Search for European Projects

16 European Projects Found

Searched on 125080 European Projects

 FINISHED 

System to significantly increase the effective yield of Calcium (and other alloying elements) in the treatment of specialty steels, while reducing impurities in the melt (HOT-WIRE)

Start date: Jan 1, 2013, End date: Dec 31, 2014,

Hotwire aims to develop a new, specially coated feed wire and dispensing system that is able to delay initial Ca core exposure from current duration of only 1.5 seconds to ~5 seconds, extend the Ca melt time (once exposed) from
Read Project

 7

 FINISHED 

DETECTION OF SAFETY CRITICAL CRACKS AND CORROSION IN SHIPS USING NOVEL SENSORS AND SYSTEMS BASED ON ULTRASONIC LINEAR PHASED ARRAY TECHNOLOGY (Ship Inspector)

Start date: Apr 1, 2009, End date: Jul 31, 2012,

Structural failure is a major cause of the wreckage of ships, vessels and tankers and causes loss of life and pollution of the seas and coastal waters of Europe as follows: §In 2004, the total amount of oil and oil products transported by sea reached the two billion-tonne/year mark (more than 40 % of total maritime traffic). The European Union accounts for 27 % of this traffic, with 90 % of Europe ...
Read Project

 18

 FINISHED 

REGIONAL WIND TECHNOLOGY AND KNOWLEDGE TRANSFER STRATEGIES (WIND-TECH-KNOW)

Start date: Dec 31, 2004, End date: Dec 30, 2007,

Through exchanging technology and experience, WIND-TECH-KNOW aims to increase the knowledge about the generation and implementation of wind energy. This helps regions that still lack sufficient regional planning and technical experience to catch-up to the standards of experienced wind energy regions and thus, contributes to a reduction of development gaps in the EU. ...
Read Project

 8

 FINISHED 

Informal Training Recognition in Welding

Start date: Oct 1, 2010,

The welding sector (which is transversal to the metalworking sector, oil & gas, construction, industry, automobile, telecommunications, etc) is facing a serious lack of qualified and certified welders. The demand of qualified welders is higher than the supply and it has been estimated that this year (2010) the shortage of welders will be in the range of 200 000 (The Wall Street Journal, Aug. 15 20 ...
Read Project

 6

 FINISHED 

Implementation of European Guidelines for Joining Technology Training

The training and qualification in areas of joining technologies like plastic welding, in the field of manufacturing technologies is presently done in each country on a "national" level. The systems implemented in each country differ from country to country as some are technologically more advanced than others, promoting the creation of differences between industrial sectors working in these areas ...
Read Project

 6

 FINISHED 

Testing and Certification of welders according to the Standard prEN ISO 9606-1.

The steel welding represents the process, in which are constantly developing and improving technologies and welding conditions, rising demands on quality of making weld joints. These trends and demands can fulfill only welders with the high qualification. The project intention is enhancement of the testing level and certification of welders. The main aims of the project are enhancement of welders ...
Read Project

 4

 FINISHED 

Implementation of International Guidelines for Welded Structural Designer Training

The importance of welding design to the global economy is known to be of significant relevance, considering its real impact.The International Institute of Welding (IIW) is a major welding organizations in which international expertise in welding and welding design is gathered and developed. IIW has developed guidance documents and technology exchange mechanisms to support companies to adopt best p ...
Read Project

 5

 FINISHED 

European Models for Extended Cost-efficient in Company and Accreditation training

...rading processes that reduce the costs related to competence and knowledge transfer, and enhances production competence and know-how transfer to companies and VET schools. This includes: Motivate VET welding instructors to use Activity Based Training Disseminate an innovative transfer system for SME in-company training that is delivered on a just-in-time basis without distance limitations, by utli ...
Read Project

 6

 FINISHED 

ECO-SME+ e-LEARNING TOOL ADDRESSED TO SMES ABOUT EMAS

ECO-SME+ project aims to strengthen the role of education and training within the Lisbon process not only to promote competitiveness but also sustainable economic growth and social cohesion. Why? Because the proposed activities deal with three basic themes and stakeholders to achieve that goal: environmental management systems, e-learning and SMEs. The Project is based on the necessity of improvin ...
Read Project

 9

 FINISHED 

New European Models for Plastic Welding Education

... 25 bar, where utilization of newplastic material and joining technologies significantly improve existing distribution systems.Main aims: Increase the number of certified welders within the plastic welding sector. Demonstrate the relevance of European harmonized education within the plastic welding society, and implement new pedagogical methods into the VET schools in NO, SK and SL. Partnership: T ...
Read Project

 5

 FINISHED 

Development of a harmonised system for education, qualification and certification of railway track welders - phase 2 ('RAILSAFE 2')

The project build on the success of the first RAILSAFE project, details of which can be found at www.ewf.be/railsafeWhereas the first project covered the joining of rails by the aluminothermic welding process, this second phase will cover the use of arc welding for joining, repairing and refurbishing rails. Arc welding requires completely different skills, but the competence requirements are just ...
Read Project

 6

 FINISHED 

Developing of programmes for training of European level welding inspection personel

The project has been completed successfully and the following goals have been achieved:- Requirements of International Institute of Welding, IIW for the European level welding control HR program were analyzed- Updated IWIP programs for individuals in Lithuanian, Estonian, Russian, German and English languages were prepared- Nondestructive testing labs in Klaipeda and Tallinn were completed- Author ...
Read Project

 5

 FINISHED 

European Training Programme for Completing the requirements for Quality Welding under Standard Series EN-ISO 3834

This project, as originally specified in its proposal, which aims to harmonize the training of personnel involved in the management and control of welding process in the industrial manufacturers across various European countries, one of the needs of business, implementation and application of EN ISO 3834. Once the project and prepared the various manuals to be used, these must be transferred to th ...
Read Project

 7

 FINISHED 

Welding Multimedia Dictionary

The concept of welding multimedia dictionary is based on the list of welding terms, the explanation text supported by figures and video records when suitable.
Read Project

 5

 FINISHED 

More flexible VET systems based on the assessment of prior learning

• 1 innovative APL/RVCC methodology and tools, on validation of non-formal and informal learning competences, will be transferred by ISQ;• 1 target group fits, VET teachers/trainers/guidance professionals through the common transfer workshop and national pilot sessions;• 1 European ECVET curricula for APL professional and a common guideline for it integration in existing national VET programmes wa ...
Read Project

 6

 FINISHED 

Health, Safety and Environmental Training for Welding Personnel

The overall aim of the WELD TRAIN project is to harmonize training and qualification of technical personnel (managers, engineers, technicians and foremen) with responsibilities in fields like environment, health and safety management in welding.
Read Project

 4