Search for European Projects

19 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Energy Efficient Tunnel FET Switches and Circuits (E2SWITCH)

Start date: Nov 1, 2013, End date: Apr 30, 2017,

E2SWITCH focuses on Tunnel FET (TFETs) as most promising energy efficient device candidates able to reduce the voltage supply of integrated circuits (ICs) below 0.25V and make them significantly more energy efficient by exploiting strained SiGe/Ge and III-V platforms, with CMOS technological compatibility. A full optimization and DC/AC benchmarking for complementary n- and p-type TFETs, integrated ...
Read Project

 11

 FINISHED 
The Mont-Blanc project aims to develop a European Exascale approach leveraging on commodity power-efficient embedded technologies. The project has developed a HPC system software stack on ARM, and will deploy the first integrated ARM-based HPC prototype by 2014, and is also working on a set of 11 scientific applications to be ported and tuned to the prototype system.The rapid progress of Mont-Blan ...
Read Project

 17

 FINISHED 
The SYNAPSE project initially aimed at the metalorganic chemical vapor phase deposition (MOCVD) and study of chalcogenide single material, (core) and double material (core-shell) nanowires (NWs), for innovative multi-level phase change memories (PCM). If Ge-Sb-Te is the most studied material for PCM applications, In-based materials, like In-Sb-Te or In-Ge-Te alloys, are also promising, since they ...
Read Project

 7

 FINISHED 
The use of High Performance Computing (HPC) is commonly recognized a key strategic element both in research and industry for an improvement of the understanding of complex phenomena. The constant growth of generated data - Big Data - and computing capabilities of extreme systems lead to a new generation of computers composed of millions of heterogeneous cores which will provide Exaflop performance ...
Read Project

 21

 FINISHED 
There is a continued need for higher compute performance: scientific grand challenges, engineering, geophysics, bioinformatics, etc. However, energy is increasingly becoming one of the most expensive resources and the dominant cost item for running a large supercomputing facility. In fact the total energy cost of a few years of operation can almost equal the cost of the hardware infrastructure. En ...
Read Project

 14

 FINISHED 

Nanowires for solid state lighting (NWs4LIGHT)

Start date: Jun 1, 2012, End date: May 31, 2015,

The suggested project aims at developing a nanowire (NW) technology applied to III-nitride and III-V materials to improve the present Solid State Lighting (SSL) solutions. Present white light emitting diode (LED) emitters are based on thin film III-nitride technology, and a combination of violet-blue LEDs and suitable phosphor coatings has yielded a light emission efficacy of > 100 lm/W with an op ...
Read Project

 7

 FINISHED 

EUropean DATa (EUDAT)

Start date: Oct 1, 2011, End date: Mar 31, 2015,

EUDAT is our proposal for the next stage in the realisation of the vision of "data as infrastructure". The EUDAT consortium includes representatives from each stage of the value chain that has evolved to deliver scientific knowledge to researchers, citizens, industry and society as a whole. It includes funding agencies that invest in research infrastructures and programmes of research, infrastruct ...
Read Project

 28

 FINISHED 
This project proposes the development of a high performance computing eco-system in the Eastern Mediterranean region by interlinking and coordinating regional compute, data and visualisation resources to form an integrated e-platform. It will provide training activities and user support, and engage the regional communities through networking activities such as workshops, exchange of visitors and o ...
Read Project

 12

 FINISHED 

Neuronal NanoCarbon Interfacing Structures (NeuroCare)

Start date: Mar 1, 2012, End date: Feb 28, 2015,

NeuroCare aims to create better retinal, cortical and cochlear implantable devices through the use of improved interfacing between the electronic implants and living cells. The NeuroCare concept involves low-cost, carbon-based materials, well-adapted for medical implants, because they (i) offer wide range of electronic properties (metal, semiconductor and insulator), (ii) are bio-inert and (iii) a ...
Read Project

 14

 FINISHED 

PhotoVoltaic European Research Infrastructure (SOPHIA)

Start date: Feb 1, 2011, End date: Jan 31, 2015,

The objective of the SOPHIA project is to strenghten and optimise research capabilities, mainly by coordinating efforts on important but precompetitive issues. Large research infrastructures working together will avoid the useless replication of a large number of small efforts. The SOPHIA project aims at pulling together the main European photovoltaic research infrastructures in order to provide t ...
Read Project

 22

 FINISHED 
Description European Union Research Initiative Aims to Increase 
Electronic Device Efficiency by 10x and Eliminate Power Consumption of Devices in Standby Mode STEEPER addresses the development of Beyond CMOS energy-efficient steep subthreshold slope transistors based on quantum mechanical band-to ...
Read Project

 14

 FINISHED 
To continue the path of cost reduction in photovoltaics the efficiency of silicon solar cells must be increased. With higher efficiencies more kWh can be produced from the same amount of silicon, which is the dominating cost factor at present. Fundamental loss mechanisms limit the maximum achievable efficiency: around 20% of the incident power is lost, because photons with energies below the band- ...
Read Project

 8

 FINISHED 

European Middleware Initiative (EMI)

Start date: May 1, 2010, End date: Apr 30, 2013,

The European Middleware Initiative is a collaboration of the three major middleware providers in Europe, ARC, gLite and UNICORE, and other consortia. EMI aims to deliver a consolidated set of middleware components for deployment in EGI, PRACE and other DCIs; extend the interoperability between grids and other computing infrastructures; strengthen the reliability of the services; and establish a su ...
Read Project

 26

 FINISHED 

DYNamics of Architecturally COmplex Polymers (DYNACOP)

Start date: Feb 1, 2009, End date: Jan 31, 2013,

"The scientific objective of DYNACOP is to obtain a fundamental understanding of the flow behaviour and the dynamics of blends of topologically complex macromolecular fluids and their role in processing and properties of blends. These materials exhibit complex dynamics and rheology and, in many cases, show hierarchical relaxation over many different timescales. This in turn affects the processin ...
Read Project

 12

 FINISHED 
"Recent photovoltaic market trends point to an increased market share of thin film technologies in addition to an increased volume of module production. In particular for amorphous silicon (a-Si) and microcrystalline silicon (uc-Si) this is driven by the recently increased availability of large area deposition systems from different equipment suppliers. The present project identifies optical light ...
Read Project

 5

 FINISHED 
"The aim of this proposal is to create a training network in the newly-emerging multidisciplinary field of “nano-opto-magnetism”, a new scientific area with novel technological opportunities at the junction of coherent nonlinear optics, nanoscience and magnetism. The impact on society of this newly emerging field is potentially very high, therefore it is decisive that now young researchers are tra ...
Read Project

 11

 FINISHED 

Towards EXaflop applicaTions (TEXT)

Start date: Jun 1, 2010, End date: Aug 31, 2012,

With top systems reaching the PFlop barrier, the next challenge is to understand how applications have to be implemented and be prepared for the ExaFlop target. Multicore chips are already here but will grow in the next decade to several hundreds of cores. Hundreds of thousands of nodes based on them will constitute the future exascale systems.TEXT is centered on the vision that the key component ...
Read Project

 10

 FINISHED 

Federated IT for a sustainable environmental impact (FIT4Green)

Start date: Jan 1, 2010, End date: Jun 30, 2012,

FIT4green aims at contributing to ICT energy reducing efforts by creating a energy-aware layer of plug-ins for data centre automation frameworks. The plug-ins enhance existing IT solutions deployment strategies by moving computation and services around a federation of IT data centres sites, with the final goal to minimize the overall power consumption figure. Without giving up on compliance to Se ...
Read Project

 10

 FINISHED 

European Exascale Software Initiative - 2010/2011 (EESI)

Start date: Jun 1, 2010, End date: Nov 30, 2011,

The European Exascale Software Initiative (EESI) goal is to build a European vision and roadmap to address the challenge of the new generation of massively parallel systems composed of millions of heterogeneous cores which will provide Petaflop performances in 2010 and Exaflop performances in 2020. These capabilities lead to outstanding technological breakthrough possibilities in computations and ...
Read Project

 8