Search for European Projects

19 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Development and implementation of Grouping and Safe-by-Design approaches within regulatory frameworks (NanoREG II)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

One of the greatest challenges facing regulators in the ever changing landscape of novel nano-materials is how to design and implement a regulatory process which is robust enough to deal with a rapidly diversifying system of manufactured nanomaterials (MNM) over time. Not only does the complexity of the MNM present a problem for regulators, the validity of data decreases with time, so that the wel ...
Read Project

 46

 FINISHED 

Development of a Master Socket for optimised design of prosthetic socket for lower limb amputees (SocketMaster)

Start date: Feb 1, 2015, End date: Jan 31, 2018,

The function of a lower limb prosthetic is highly dependent upon the characteristics and anatomical profile of the residual limb. This is unique to each individual and changes depending on the activities being engaged in by the amputee. A poorly fitting prosthetic socket can cause significant trauma so it is important to consider how to optimise the fit to maximise the amputee's comfort whilst we ...
Read Project

 9

 FINISHED 

Plasmonic-based autOmated lab-on-chip SEnsor for the rapid In-situ Detection of LegiONella (POSEIDON)

Start date: Jan 1, 2015, End date: Dec 31, 2017,

Legionnaires’ disease is a serious form of pneumonia caused by bacterium Legionella pneumophila, with a case-fatality ratio on the order of 10-15%. L. pneumophila proliferates in aquatic habitats, especially in potable water, air conditioning, hot and cold water systems, cooling towers, evaporative condensers, spa/natural pools. Actually, its detection and monitoring rely on time-consuming protoco ...
Read Project

 7

 FINISHED 

New Oral Nanomedicines: Transporting Therapeutic Macromolecules across the Intestinal Barrier (TRANS-INT)

Start date: May 1, 2012, End date: Apr 30, 2017,

Despite the increasing number of macromolecules with potential impact in the treatment of devastating systemic diseases, these therapies have failed to deliver on their expectations because they cannot be administered in the fashion which is most cost efficient and has the highest patient compliance: the oral route. The availability of an oral form of administration could lead to a great improveme ...
Read Project

 20

 FINISHED 

SUSTAINABLE NANOTECHNOLOGIES (SUN)

Start date: Oct 1, 2013, End date: Mar 31, 2017,

SUN (Sustainable Nanotechnologies) is the first project addressing the entire lifecycle of nanotechnologies to ensure holistic nanosafety evaluation and incorporate the results into tools and guidelines for sustainable manufacturing, easily accessible by industries, regulators and other stakeholders. The project will incorporate scientific findings from over 30 European projects, national and inte ...
Read Project

 38

 FINISHED 

A common European approach to the regulatory testing of nanomaterials (NANOREG)

Start date: Mar 1, 2013, End date: Feb 28, 2017,

The innovative and economic potential of Manufactured Nano Materials (MNMs) is threatened by a limited understanding of the related EHS issues. While toxicity data is continuously becoming available, the relevance to regulators is often unclear or unproven. The shrinking time to market of new MNM drives the need for urgent action by regulators. NANoREG is the first FP7 project to deliver the answe ...
Read Project

 73

 FINISHED 

Promoting the Implementation of Safe by Design (PROSAFE)

Start date: Feb 1, 2015, End date: Jan 31, 2017,

The CSA links different initiatives and facilitates the integration of results from these initiatives, so that a maximum use of these results can benefit the regulatory process. The CSA is designed to facilitate this process and show European leadership on chemical safety, including nano’s. The aim of this activity is to coordinate and support for risk assessment, management and governance by stre ...
Read Project

 17

 FINISHED 

Cold Spray Radical Solutions for Aeronautic Improved Repairs (CORSAIR) (CORSAIR)

Start date: Jun 1, 2013, End date: Nov 30, 2016,

CORSAIR project is a wide investigation concerning the capabilities of Cold Spray Technology for maintenance and repair of aeronautic frames and components. Today, deep and systematic investigation in Cold Spray is required to better understand the capabilities and fully validate the technology in aeronautics. In this scenario, the activities planned in CORSAIR project are (1) Explore the real cap ...
Read Project

 13

 FINISHED 

EUROpean network for transnational collaborative RTD projects in the field of NANOMEDicine (EURONANOMED II)

Start date: Nov 1, 2012, End date: Oct 31, 2016,

Nanomedicine, the application of nanotechnology to health, is a fast-growing field with a large potential for improving diagnostics and therapeutic solutions in many diseases. The EuroNanoMed II (ENM II) consortium, with 20 partners from 17 countries and regions, aims to foster the competitiveness of European nanomedicine actors through the support of translational research projects enhancing tran ...
Read Project

 25

 FINISHED 

Development of reference methods for hazard identification, risk assessment and LCA of engineered nanomaterials (NANOVALID)

Start date: Nov 1, 2011, End date: Oct 31, 2015,

The growing development, production and use of engineered nanomaterials and associated products will increase exposure of both humans and ecosystems to these new materials. However, current knowledge is still incomplete and established test methods are as yet inappropriate to reliably assess the extent of exposure and risk of materials at the nano-scale. There is an urgent need to develop methods ...
Read Project

 32

 FINISHED 

Safe Implementation of Innovative Nanoscience and Nanotechnology (SIINN)

Start date: Aug 1, 2011, End date: Jul 31, 2015,

The primary aim of the SIINN ERA-NET is to promote the rapid transfer of the results of nanoscience and nanotechnology (N&N) research into industrial application by helping to create reliable conditions. In order to strengthen the European Research Area and to coordinate N&N-related R&D work, the project has the aim of bringing together a broad network of ministries, funding agencies, academic and ...
Read Project

 20

 FINISHED 

Plasma And Nano for New Age “soft” conservation (PANNA)

Start date: Nov 1, 2011, End date: Oct 31, 2014,

The main objective is to develop a novel atmospheric plasma technique for surface cleaning and coating deposition as well as two innovative coatings: a self-diagnostic protective coating and a coating provided with identification marker.The project aims at integrating the new plasma cleaning/deposition technique and the new coatings in a “full-life” protocol spanning surface cleaning and pre-treat ...
Read Project

 10

 FINISHED 

Nanotechnology for Chemical Enterprises – how to link scientific knowledge to the business in the Central Europe space (NANOFORCE)

Start date: Apr 30, 2011, End date: Oct 30, 2013,

It is worth pointing out that the word "nanotechnology" has become very popular and rightly so as if by rearranging atoms we can produce something completely different, number of possibilities is endless. Nanotechnology currently underpins many practical applications (medical, Information and communication technologies, energy production, food-water, security, broad range of materials etc..) and ...
Read Project

 9

 FINISHED 

INTELLIGENT TESTING STRATEGY FOR ENGINEERED NANOMATERIALS (ITS-NANO)

Start date: Mar 1, 2012, End date: May 31, 2013,

The background, concept and objectives of ITS-NANO are straight forward. The volume of information on hazard characterisation of ENM is increasing fast. In parallel with the scientific development, regulation orientated initiatives are also taking place to identify needs.The ITS-NANO concept is 1: Gather targeted all scientific evidence, by literature search and communication with leading scientis ...
Read Project

 10

 FINISHED 

Development of sustainable solutions for nanotechnology-based products based on hazard characterization and LCA (NANOSUSTAIN)

Start date: May 1, 2010, End date: May 31, 2013,

Objective of the NanoSustain project is to develop innovative solutions for the sustainable design, use, recycling and final treatment of nanotechnology-based products This will be achieved by a comprehensive data gathering and generation of relevant missing data, as well as their evaluation and validation, for specific nanoproducts or product groups in relation to their human health and environme ...
Read Project

 12

 FINISHED 

Lowering Barriers for Nanotechnology Commercialisation via Open Innovation (NanoCom)

Start date: Dec 1, 2009, End date: Nov 30, 2012,

The NanoCom coordinated action will contribute to bridging the gap between lab based and industrial applications in nanotechnology by creating a European wide approach and mechanisms for lowering the barriers and spreading best open innovation practices for rapid commercialisation and investment in innovative nanotechnology driven products. The vision will be supported by the following key objecti ...
Read Project

 17

 FINISHED 

Network in Advanced Materials and Nanomaterials of industrial interest between Europe and Latin American Countries of MERCOSUR (Argentina-Brazil-Uruguay) (EULASUR)

Start date: Aug 1, 2009, End date: Jul 31, 2012,

A key thrust of FP7 is to promote international collaborative research with third countries. The EULASUR project will address the Call for Co-ordination Action in Materials by creating a cooperation platform for forming strategic research partnerships between scientists, policy makers, technology transfer and industrial experts in the EC and 3 Latin-American countries belonging to MERCOSUR: Braz ...
Read Project

 15

 FINISHED 

Knowledge and Excellence in European Nanotechnology - Regions (KEEN-REGIONS)

Start date: Jun 1, 2009, End date: May 31, 2012,

...ntres in Europe are working in research-driven clusters, aggregates of key-players who are not just researchers, but networks of competitive companies and public authorities. This is the case of Veneto Nanotech (Veneto), Minatec (Rhone-Alps) and Gaia (Basque Country) , which together control more than 200 M€ public investments, 2000 researchers, and 200 research laboratories. If these 3 clusters ...
Read Project

 11

 FINISHED 

EUROpean network of trans-national collaborative RTD in the field of NANOMEDicine (EuroNanoMed)

Start date: Jan 1, 2009, End date: Dec 31, 2011,

Nanomedicine is an emerging field with a large potential for developing public welfare and economic growth. Critical issues for bringing up this potential in Europe concern especially the maturity of the economic players and their capability to move effectively innovation from knowledge to industrial technology and to clinical and public health applications. Industrial players need therefore to co ...
Read Project

 25