Search for European Projects

21 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Standardized Qualifying tests of electrolysers for grid services (QualyGridS)

Start date: Jan 1, 2017, End date: Dec 31, 2019,

The overall objective of the QualyGridS project is the establishing of standardized tests for electrolysers performing electrical grid services. Alkaline electrolysers as well as PEM electrolysers will be considered individually in performance analysis and in an assessment of business cases for these electrolysers’ use. A variety of different grid services will be addressed as well as multiple hyd ...
Read Project

 10

 FINISHED 

Standards and Regulations for the Bio-based Industry (STAR4BBI)

Start date: Sep 1, 2016, End date: Aug 31, 2019,

This project will contribute at establishing a coherent, well-coordinated and favourable regulatory / standardization framework for supporting the development of a cutting edge bio-economy for Europe. More specifically, support to the standardization process for the concrete development of new value chains based on lignocellulosic feedstocks and biomass from forests, from agriculture and from orga ...
Read Project

 4

 FINISHED 

Trillium Bridge II - Reinforcing the Bridges and Scaling up EU/US Cooperation on Patient Summary (Trillium II)

Start date: Jan 1, 2017, End date: Jun 30, 2019,

Trillium-II steps forward with an outstanding consortium to further advance global Electronic Health Record (EHR) interoperability. Activities surrounding the International Patient Summary (IPS) standards can nurture digital health innovation, lower trade barriers, and advance patient safety & trust, bridging the gap between strategic intent and capability for action by Standards Development Organ ...
Read Project

 21

 FINISHED 

Identification of legal rules and administrative processes applicable to Fuel Cell and Hydrogen technologies’ deployment, identification of legal barriers and advocacy towards their removal. (HyLAW)

Start date: Jan 1, 2017, End date: Dec 31, 2018,

The fuel cells and hydrogen (FCH) industry has made considerable progress toward market deployment. However existing legal framework and administrative processes (LAPs) – covering areas such as planning, safety, installation and operation – only reflect use of incumbent technologies. The limited awareness of FCH technologies in LAPs, the lack of informed national and local administrations and the ...
Read Project

 23

 FINISHED 

Climate Resilient Cities and Infrastructures (RESIN)

Start date: May 1, 2015, End date: Oct 31, 2018,

With most of its population and capital goods concentrated in urban areas, cities are key to the European economy. One of the major challenges cities face are more frequent extreme weather events due to climate change.The current diversity of approaches and methods available for cities developing an adaptation strategy limits the comparability between cities of vulnerabilities, adaptation option ...
Read Project

 17

 FINISHED 

PROGRESSIVE STANDARDS AROUND ICT FOR ACTIVE AND HEALTHY AGEING (PROGRESSIVE)

Start date: Oct 1, 2016, End date: Sep 30, 2018,

The PROGRESSIVE project will provide a dynamic and sustainable framework for standards and standardisation around ICT for AHA. The project is pan-European but also draw on wider international experience – especially in the contexts of interoperability and standards harmonisation.As attitudes towards ageing change there is recognition of the importance of older people’s engagement. Engagement can e ...
Read Project

 10

 FINISHED 

Increasing disaster Resilience by establishing a sustainable process to support Standardisation of technologies and services (ResiStand)

Start date: May 1, 2016, End date: Apr 30, 2018,

Standardisation is a powerful tool to achieve better interoperability. However, it needs to overcome a lack of interest and modest participation from stakeholders. Also, promising research results are not always used as the basis for new standards.The overall goal of ResiStand is to find new ways to improve the crisis management and disaster resilience capabilities of the European Union and indivi ...
Read Project

 15

 FINISHED 

Stakeholders Acting Together On the ethical impact assessment of Research and Innovation (SATORI)

Start date: Jan 1, 2014, End date: Sep 30, 2017,

SATORI is a 45-month project, comprising 17 partners from 13 countries, including an intergovernmental organisation, the aim of which is to improve respect of ethics principles and laws in research and innovation, and to make sure that they are adequately adapted to the evolution of technologies and societal concerns. The partners will develop an ethics assessment framework based on thorough analy ...
Read Project

 19

 FINISHED 

Functional Adaptive nano-Materials and technologies for energy efficient BUILDings (FOAM-BUILD)

Start date: Sep 1, 2013, End date: Aug 31, 2017,

FoAM-BUILD will develop next generation External Thermal Insulation Composite Systems (ETICS) for new builds and retrofitting applications. This comprises innovations in:1) Insulation material: development of new, lightweight and highly insulating nano-cellular foams, with a 50% reduction in thermal conductivity compared to conventional insulation elements. Non-halogenated nano-based flame retarda ...
Read Project

 12

 FINISHED 

Evaluation and certification schemes for security products – Capability Project (CRISP)

Start date: Apr 1, 2014, End date: Mar 31, 2017,

CRISP aims at facilitating a harmonised playing field for the European security industry by developing a robust methodology for security product certification. CRISP will enhance existing security evaluation and certification schemes by offering an innovative evaluation methodology that integrates the security, trust, efficiency and freedom infringement assessment dimensions. The proposed scheme w ...
Read Project

 9

 FINISHED 

Wind Blade Using Cost-Effective Advanced Composite Lightweight Design (WALID)

Start date: Feb 1, 2013, End date: Jan 31, 2017,

WALiD will combine design, material and process developments using thermoplastic materials to create cost-efficient, lightweight and recyclable blades which will be demonstrated by industrial end-users. The power generated by off-shore wind turbines is proportional to the rotor plane area of the blade. However, the weight of large blades puts the materials used under considerable strain, leading t ...
Read Project

 15

 FINISHED 

Innovative Materials for Multiple Junction OPVs and for Improved Light Management (MUJULIMA)

Start date: Jan 1, 2014, End date: Dec 31, 2016,

Solar photovoltaic (PV) technology is one of the fastest growing sustainable, renewable energy conversion technologies that can help meet the increasing global energy demands. Organic photovoltaic (OPV) technologies are particularly attractive due to their compatibility with low-cost roll-to-roll and printing processing at low temperatures on a wide variety of substrate materials and the lack of s ...
Read Project

 12

 FINISHED 

Opening bio-based markets via standards, labelling and procurement (OPEN-BIO)

Start date: Nov 1, 2013, End date: Oct 31, 2016,

"Application of standards, certification schemes and labels has positive long-term effects on the overall development of the European bio-based product market. Good product information that presents correct claims to industry and public procurers is vital for the usage of these new products. Ensuring the sustainable sourcing of raw materials and the effective bio-content are important additional s ...
Read Project

 15

 FINISHED 

Reuse and development of Security Knowledge assets for International Postal supply chains (SAFEPOST)

Start date: Apr 1, 2012, End date: Jul 31, 2016,

SAFEPOST aims to raise the current level of postal security by integrating innovative screening solutions suitable for uninterrupted flow of the enormous volumes of parcels and letters with operational postal processes and the criminal and customs intelligence work in a European wide cooperative distributed model.Starting from the perspective of the partner postal operations, the project will firs ...
Read Project

 20

 FINISHED 

European Network fOr FALL Prevention, Intervention & Security\nE-NO FALLS (E-NO FALLS)

Start date: Jan 28, 2013, End date: Jan 31, 2016,

Description The main goal of this thematic network is to integrate and bring together knowledge, experiences and best practices acquired at European and international level in the area of fall prevention, intervention and safety, with the aim of coordinating ongoing activities and creating the necessary conditions and consensus on action pla ...
Read Project

 19

 FINISHED 

Knowledge Based Bio-based Products' Pre-Standardization (KBBPPS)

Start date: Aug 1, 2012, End date: Jul 31, 2015,

"The application of standards and certification systems in the European bio-based product industry has positive long-term effects on the overall development of bio-based product markets. Trade barriers are reduced and the development of a pan-European market for bio-based products is promoted. Finally, public acceptance of bio-based products is increased through ensuring and verifying the sustaina ...
Read Project

 7

 FINISHED 

Bridging Patient Summaries across the Atlantic (Trillium Bridge)

Start date: Jul 1, 2013, End date: Jun 30, 2015,

Description Bridging Patient Summaries across the Atlantic What if you, while visiting the US, need urgent medical help and the doctor doesn't know your medical history? The Trillium Bridge project wants to align the use of standards between the EU and the US to share basic patient data between EU ...
Read Project

 13

 FINISHED 

ANTILOPE - Adoption and take up of standards and profiles for eHealth Interoperability (ANTILOPE)

Start date: Feb 1, 2013, End date: Jan 31, 2015,

Description ANTILOPE is a Thematics Network setup on core European National organisations supporting the adoption and testing of existing eHealth standards and specifications defening and eHealth interoperability framework.Based on the results and recommendations in the Hitch project the network is set up to promote and drive adoption of tes ...
Read Project

 23

 FINISHED 

Support Action for Standardisation in Additive Manufactruring (SASAM)

Start date: Sep 1, 2012, End date: Feb 28, 2014,

SASAM's mission is to drive the growth of AM to efficient and sustainable industrial processes by integrating and coordinating Standardisation activities for Europe by creating and supporting a Standardisation organisation in the field of AM.The Additive Manufacturing (AM) concept is based on additive freeform fabrication technologies for the automated production of complex products. Additive Manu ...
Read Project

 18

 FINISHED 

Demonstration of 2nd Generation Vegetable Oil Fuels in Advanced Engines (2NDVEGOIL)

Start date: Aug 1, 2008, End date: Dec 31, 2011,

Pure vegetable oil use as engine fuel has the potential for the most comprehensive ecologic, economic and social benefits of all biofuels. The production involves few process steps and can be done economically with small production units. The production process has only small energy losses and provides potential for additional income generation on farms, thereby strengthening rural economic struct ...
Read Project

 10

 FINISHED 

GEOSS INSPIRE and GMES an Action in Support (GIGAS)

Start date: Jun 1, 2008, End date: May 31, 2010,

The GEOSS INSPIRE and GMES an Action in Support (GIGAS) promotes the coherent and interoperable development of the GMES, INSPIRE and GEOSS initiatives through their concerted adoption of standards, protocols, and open architectures. Given the complexity and dynamics of each initiative and the large number of stakeholders involved, the key added value of GIGAS is bringing together the leading organ ...
Read Project

 20