15 European Projects Found
Searched on 125080 European Projects
FINISHED
Increased Runway and Airport Throughput (PJ02 EARTH)
Start date: Dec 1, 2016, End date: Dec 31, 2019,
EUROCONTROL’s 2013 Challenges of Growth Report “by 2035 more than 20 airports are operating at 80% or more of capacity for 6 or more hours per day … drives ATFCM airport delay up from around 1 minute/flight in 2012 to 5-6 minutes in 2035.”Whereas social, economic and environmental constraints impede building new runways, secondary airports are hindered by technical, infrastructure and meteorologic ...
Read Project
35
Partners Participants
FINISHED
Integrated Surface Management (PJ03a SUMO)
Start date: Dec 1, 2016, End date: Dec 31, 2019,
The project PJ.03a is part of the SESAR 2020 Multi Annual Program for the period 2016-2019. It is allocated to the Industrial Research & Validation phase, developed under the SJU Private Public Partnership and will contribute to the key feature High Performing Airport Operations. The future European ATM system relies on full integration of airports as nodes into the network. In this context, PJ.03 ...
Read Project
37
Partners Participants
FINISHED
Total Airport Management (PJ04 TAM)
Start date: Dec 1, 2016, End date: Dec 31, 2019,
"Why ? : Airport Operations Management in SESAR1 promoted enhanced situational awareness via the Airport Operations Plan (AOP) whilst reinforcing the collaborative decision making process through the Airport Operations Centre (APOC). Validation activities stressed the need to further develop the Performance Monitoring and Management services promoting the evolution from a reactive (“firefighting” ...
Read Project
30
Partners Participants
FINISHED
Remote Tower for Multiple Airports (PJ05 Remote Tower)
Start date: Nov 1, 2016, End date: Nov 30, 2019,
"Cost-effectiveness, clearly described in the topic SESAR.IR-VLD.Wave1-08-2015 as the main key performance area (KPA), is the principal KPA addressed by “PJ05 Remote Tower” project. It proposes the development of a remotely provided aerodrome air traffic service by a "multiple" and/or "center" setting. Those settings help to combine ATS services from various aerodromes in a centralized control roo ...
Read Project
31
Partners Participants
FINISHED
Advanced DCB (PJ09 DCB)
Start date: Nov 1, 2016, End date: Oct 31, 2019,
The S2020 project “PJ09 Advanced DCB” evolves the existing DCB process to a powerful distributed network management function which takes full advantage from the SESAR Layered Collaborative Planning, Trajectory Management principles and SWIM Technology to improve the effectiveness of ATM resource planning and the network performance of the ATM system in Europe. Solution 1 develops shared situation ...
Read Project
30
Partners Participants
FINISHED
European Explosives sector implementation of occupational standards
Start date: Sep 1, 2014, End date: Aug 31, 2017,
Project activities are related to the need of up-skilling the workforce in the European explosives sector and to ensure that the companies and stakeholders in the sector will maintain or develop their competitiveness to ensure the survival on the global market, prevent job losses and maintain a safe industry. Project goals will comply with the Horizon 2020 targets to ensure that skills and qualifi ...
Read Project
10
Partners Participants
FINISHED
LOw COst Manufacturing and Assembly of Composite and Hybrid Structures (LOCOMACHS)
Start date: Sep 1, 2012, End date: Aug 31, 2016,
...012-RTD-1 against the activity area AAT.2012.4.4-1 “Integrated approach and demonstration to lean manufacturing of metal, composite and hybrid aircraft / engine structures” by a Consortium led by Saab AB.
Read Project
33
Partners Participants
FINISHED
Smart Intelligent Aircraft Structures (SARISTU)
Start date: Sep 1, 2011, End date: Aug 31, 2015,
The project proposal concerns the challenges posed by the physical integration of smart intelligentstructural concepts. It addresses aircraft weight and operational cost reductions as well as animprovement in the flight profile specific aerodynamic performance.This concerns material concepts enabling a conformal, controlled distortion of aerodynamicallyimportant surfaces, material concepts enablin ...
Read Project
68
Partners Participants
FINISHED
BRIDGE: Bridging resources and agencies in large-scale emergency management (BRIDGE)
Start date: Apr 1, 2011, End date: Jun 30, 2015,
"The goal of BRIDGE is to increase safety of citizens by developing technical and organisational solutions that significantly improve crisis and emergency management. The key to this is to ensure interoperability, harmonization and cooperation among stakeholders on the technical and organisational level.Therefor BRIDGE delivers:- Resilient ad-hoc network infrastructures, focussing on the requireme ...
Read Project
15
Partners Participants
FINISHED
All Condition Operations and Innovative Cockpit Infrastructure (ALICIA)
Start date: Sep 1, 2009, End date: Aug 31, 2014,
"ALICIA addresses the ACARE objective of increasing time efficiency within the future air transport system. The aim will be to develop a new and scalable cockpit application which can extend operations of aircraft in degraded conditions – “All Conditions Operations”. A key objective will be to deliver an extensible application that can be applied to many aircraft types. This will necessarily enta ...
Read Project
42
Partners Participants
FINISHED
Collaborative & Robust Engineering using Simulation Capability Enabling Next Design Optimisation (CRESCENDO)
Start date: May 1, 2009, End date: Oct 31, 2012,
"The IMG4 project CRESCENDO addresses the Vision 2020 objectives for the aeronautical industry by contributing significantly to the fulfilment of three specific targets of the aeronautical industry’s Strategic Research Agenda. CRESCENDO will develop the foundations for the Behavioural Digital Aircraft (BDA), taking experience and results from VIVACE, and integrating these into a federative system ...
Read Project
59
Partners Participants
FINISHED
Integrated Gas Powertrain - Low Emission, CO2 optimised and efficient CNG engines for passenger cars (PC) and light duty vehicles (LDV) (InGAS)
Start date: Oct 1, 2008, End date: Mar 31, 2012,
Main objective of “Integrated gas powertrain (InGas)” Collaborative Project is to deploy a custom designed engine integrated with specific aftertreatment systems applied to a light duty vehicle able to achieve a 10% higher fuel conversion efficiency than that of a corresponding 2006 diesel vehicle and complying with an emission level lower than Euro 6. Additional features are advanced storage syst ...
Read Project
30
Partners Participants
FINISHED
Localisation of Threat Substances in Urban Society (LOTUS)
Start date: Jan 1, 2009, End date: Dec 31, 2011,
...cally sent to an operations centre display unit where data is collected and evaluated for further action. The LOTUS consortium consists of three research institutes (FOI, TNO, AIT), two industries (SAAB, Bruker), three SMEs (Portendo, Ramem,Bruhn NewTech), the University of Barcelona, and a group of End Users."
Read Project
10
Partners Participants
FINISHED
Advanced Remote Tower- ART (ART)
Start date: Nov 1, 2007, End date: Oct 31, 2009,
The ART proposal will study the concept of remotely operated ATC units and supporting technologies in order to enhance regularity during low visibility operations and to substantially decrease the ATC related costs at airports. The purpose is to explore the concept of remotely operated towers and to test and validate additional sensors that will enhance the air traffic controllers' situational awa ...
Read Project
5
Partners Participants
FINISHED
The project aims at providing vocational fire fighting training, with the innovative concept for fighting indoor fires from outside the building, thus avoiding the personnel getting killed or injured and also reducing efficiently damages. Two pilot educational occasions will be organised: seminars for valorisation, dissemination and evaluation, and training for trainers. Mainstreaming into educati ...
Read Project
