Search for European Projects

20 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Low Emissions Intensity Lime and Cement (LEILAC)

Start date: Jan 1, 2016, End date: Dec 31, 2020,

LEILAC, Low Emissions Intensity Lime And Cement, will successfully pilot a breakthrough technology that will enable both Europe’s cement and lime industries to reduce their emissions dramatically while retaining, or even increasing, international competitiveness. LEILAC will develop, build and operate a 240 tonne per day pilot plant demonstrating Direct Separation calcining technology which will c ...
Read Project

 13

 FINISHED 
The FLEDGED project will deliver a process for Bio-based dimethyl Ether (DME) production from biomass. The FLEDGED project will combine a flexible sorption enhanced gasification (SEG) process and a novel sorption enhanced DME synthesis (SEDMES) process to produce DME from biomass with an efficient and low cost process.The primary aim of FLEDGED project is to develop a highly intensified and flexib ...
Read Project

 11

 FINISHED 
Zelcor project aims at demonstrating the feasibility of transforming lignocellulose biorefinery recalcitrant side streams into high added-value biobased products, including fine chemicals. Its concept is to combine chemical and enzymatic catalysis with insects-based biological conversion, within a biorefinery integrated approach. The project is conceived to avoid waste production by recycling wast ...
Read Project

 18

 FINISHED 

MEthane activation via integrated MEmbrane REactors (MEMERE)

Start date: Oct 1, 2015, End date: Sep 30, 2019,

The key objective of the MEMERE project is the design, scale-up and validation of a novel membrane reactor for the direct conversion of methane into C2H4 with integrated air separation. The focus of the project will be on the air separation through novel MIEC membranes integrated within a reactor operated at high temperature for OCM allowing integration of different process steps in a single multi ...
Read Project

 11

 FINISHED 
The key objective of the HyGrid project is the design, scale-up and demonstration at industrially relevant conditions a novel membrane based hybrid technology for the direct separation of hydrogen from natural gas grids. The focus of the project will be on the hydrogen separation through a combination of membranes, electrochemical separation and temperature swing adsorption to be able to decrease ...
Read Project

 7

 FINISHED 
The RESYNTEX project aims at designing, developing and demonstrating new high environmental impact industrial symbiosis between the unwearable blends and pure components of textile waste and the chemical and textile industries. The project comprises:- a strategic design of the whole value chain from textile waste collection, until the new marketable feedstock for chemical & textile industrie, by w ...
Read Project

 21

 FINISHED 
BIONICO will develop, build and demonstrate at a real biogas plant (TRL6) a novel reactor concept integrating H2 production and separation in a single vessel. The hydrogen production capacity will be of 100 kg/day.By using the novel intensified reactor, direct conversion of biogas to pure hydrogen is achieved in a single step, which results in an increase of the overall efficiency and strong decre ...
Read Project

 8

 FINISHED 
"ASCENT will provide a robust proof-of-concept of three related high temperature processes; each will lead to a step-change in efficiency of carbon removal in three types of pre-combustion capture, producing the hydrogen needed for highly efficient low-carbon power production. The project brings together five small and medium enterprises preparing to launch these concepts with the support of leadi ...
Read Project

 18

 FINISHED 
FLUIDCELL aims the Proof of Concept of an advanced high performance, cost effective bio-ethanol m-CHP FC system for decentralized off-grid, by improving technology developments from previous EU projects. The improvements will be achieved by development of a) better system integration using a fluidized bed catalytic membrane reactor working at low temperature (
Read Project

 9

 FINISHED 

RENESENG

Start date: Nov 1, 2013, End date: Oct 31, 2017,

"RENESENG aims to prepare a new generation of highly-qualified researchers in Biorefinery and biobased chemicals Systems Engineering Sciences in Europe, expected to bear high impact in the design of newly establishing industrial complexes in biorefinering and more generally in eco-industries. The effort requires to bring together academic and industrial teams, with particularly interdisciplinary a ...
Read Project

 12

 FINISHED 

Optimised food products for elderly populations (OPTIFEL)

Start date: Sep 1, 2013, End date: Feb 28, 2017,

Optilfel has as its ultimate goal to contribute to elders’ health by combating denutrition due to both physical capacities diminution and appetite loss. The concept of Optifel is to translate the knowledge on nutritional needs, food preferences and physical capacities into accurate specifications for food products and packaging. Food products (including packaging and food serving methods) will the ...
Read Project

 29

 FINISHED 

Advanced Multi-Fuel Reformer for Fuel Cell CHP Systems (ReforCELL)

Start date: Feb 1, 2012, End date: Dec 31, 2015,

Distributed power generation via Micro Combined Heat and Power (m-CHP) systems, has been proven to overcome disadvantages of centralized plant since it can give savings in terms of Primary Energy consumption and energy costs. The main advantage is that m-CHP systems are able to recover and use the heat that in centralized systems is often lost. Wide exploitation of these systems is still hindered ...
Read Project

 11

 FINISHED 
Description TREASORES: producing cheaper large area organic optoelectronic devices using roll-to-roll processes; developing new transparent, conductive, flexible electrodes and better barrier films.TREASORES (Transparent Electrodes for Large Area, Large Scale Production of Organic Optoelectronic Devices) is a project that seeks to develop ...
Read Project

 16

 FINISHED 
"TOX-TRAIN is a 4-year project and its main objective is the development and implementation of a tool box to assess toxicological impacts related to the life-cycle of technologies. The USEtox model, developed under UNEP-SETAC auspices with contributions of the partners in this consortium, will be taken as a starting point. First, TOX-TRAIN will develop and implement estimation tools for emissions ...
Read Project

 4

 FINISHED 
The growing development, production and use of engineered nanomaterials and associated products will increase exposure of both humans and ecosystems to these new materials. However, current knowledge is still incomplete and established test methods are as yet inappropriate to reliably assess the extent of exposure and risk of materials at the nano-scale. There is an urgent need to develop methods ...
Read Project

 32

 FINISHED 
The water and waste water sector is facing tremendous challenges to assure safe, cost-effective and sustainable water supply and sanitation services. DEMEAU promotes the uptake of knowledge, prototypes and practices from previous EU research enabling the water cycle sector to face emerging pollutants and thus securing water and waste water services and public health. The project exploits four grou ...
Read Project

 17

 FINISHED 
The DEMCAMER project proposes an answer to the paradigm met by the European Chemical Industry: increase the production rate while keeping the same products quality and reducing both production costs and environmental impacts. Through the implementation of a novel process intensification approach consisting on the combination of reaction and separation in a “Catalytic Membrane Reactor” single unit. ...
Read Project

 20

 FINISHED 
The e-SAVE project aims to contribute to an energy-efficient supply chain by providing the system, services, collaboration platform and management tools that will help companies monitor, manage and share energy use and carbon footprint data in order to support operational as well as strategic decision making and supply chain design decisions. The project will specifically focus on the consumer goo ...
Read Project

 11

 FINISHED 
The development and implementation of bio-refinery processes is an absolute necessity and the key to meet the vision towards bio-based economy. The EuroBioRef concept is an integrated, sustainable and diversified bio-refinery involving all biomass value chain stakeholders. The latter will allow large-scale research, testing, optimisation and demonstration of processes in the production of a wide r ...
Read Project

 34

 FINISHED 
"LC-IMPACT is a 3.5-year project and its main objective is the development and application of life cycle impact assessment methods, characterisation and normalisation factors. Impact from land use, water use, marine, mineral and fossil resource use, ecotoxicity and human toxicity, and a number of non-toxic emission-related impact categories will be considered in LC-IMPACT. First, new impact assess ...
Read Project

 16