Search for European Projects

15 European Projects Found

Searched on 125080 European Projects

 FINISHED 

FLEXOLIGHTING

Start date: Jan 1, 2015, End date: Dec 31, 2017,

The flexolighting programme is focussed on research and innovations on materials, processes and device technology for OLED lighting with the intention of building a supply chain within Europe. The aim is to realise OLED devices over a large area/surface with high brightness, high uniformity and long life time. A demonstrator will be built and delivered at the end of the project. The main targets a ...
Read Project

 9

 FINISHED 

Which Architecture Yields Two Other Generations Of Fully depleted Advanced Substrate and Technologies (WAYTOGO FAST)

Start date: May 1, 2015, End date: Apr 30, 2017,

The proposed pilot line project WAYTOGO FAST objective is to leverage Europe leadership in Fully Depleted Silicon on Insulator technology (FDSOI) so as to compete in leading edge technology at node 14nm and beyond preparing as well the following node transistor architecture. Europe is at the root of this breakthrough technology in More Moore law. The project aims at establishing a distributed pilo ...
Read Project

 32

 FINISHED 

Multilaser Additive Layer Manufacturing of Tiles (MALT)

Start date: Jun 1, 2013, End date: Dec 31, 2016,

Laser Additive Layer Manufacturing of tiles in various nickel superalloys has been demonstrated at TRL4. Considerable investment has been made in developing materials data for the processes of record employed on the current generation of equipment, however this equipment is for general purpose prototyping and is not capable of high volume, low cost production of flight parts.The objective of this ...
Read Project

 3

 FINISHED 

Integrated Biotechnological Solutions for Combating Marine Oil Spills (Kill●Spill)

Start date: Jan 1, 2013, End date: Dec 31, 2016,

...p, and longer-term actions, specifically tailored to the versatility of oil spills. Kill●Spill develops chemicals & biochemicals to be used for 1st response actions to disperse/emulsify oil and materials enabling the containment and sorption of oil, preparing the field for the follow-up actions. Kill●Spill develops (Bio)technologies aiming at intensified biodegradation processes by bioaugmentation ...
Read Project

 35

 FINISHED 

Advanced materials for lean burn combustion tiles using laser- Additive Layer Manufacturing (L-ALM) (ASLAM)

Start date: Oct 1, 2013, End date: Aug 31, 2016,

The objective of this project is to develop materials and processes for use in laser additive layer manufacture, which are capable of meeting the stated requirement for advanced, high temperature nickel superalloys (with high levels of gamma prime forming elements) for use in novel combustion components for lean burn engine developments.The Participants will review the current state of the art an ...
Read Project

 3

 FINISHED 

Multi-Sensor-Platform for Smart Building Management (MSP)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

The concept of the MSP project is based on a multi-project wafer approach that enables the development of highly innovative components and sensors based on Key Enabling Technologies (KETs). The central objective of the MSP-project is the development of a technology and manufacturing platform for the 3D-integration of sophisticated components and sensors with CMOS technology being the sound foundat ...
Read Project

 17

 FINISHED 

Smart Intelligent Aircraft Structures (SARISTU)

Start date: Sep 1, 2011, End date: Aug 31, 2015,

The project proposal concerns the challenges posed by the physical integration of smart intelligentstructural concepts. It addresses aircraft weight and operational cost reductions as well as animprovement in the flight profile specific aerodynamic performance.This concerns material concepts enabling a conformal, controlled distortion of aerodynamicallyimportant surfaces, material concepts enablin ...
Read Project

 68

 FINISHED 

MASKLESS ELECTROCHEMICAL SURFACE MODIFICATION PROCESS (MESMOPROC)

Start date: Aug 5, 2012, End date: Aug 4, 2015,

The central project aims are to:Implement a novel low cost, resource efficient and sustainable process by combining electrochemical reactor engineering with innovative ultrasound agitation to enable selective metallisation of microscale devices, components and printed circuit boards (PCBs) without requiring photolithography.Design, integrate and scale-up the technology to enable successful, econom ...
Read Project

 7

 FINISHED 

NOVEL AERONAUTICAL MULTIFUNCTIONAL COMPOSITE STRUCTURES WITH BULK ELECTRICAL CONDUCTIVITY AND SELF-SENSING CAPABILITIES (ELECTRICAL)

Start date: Oct 1, 2010, End date: Jun 30, 2014,

"Aircraft structures appear to be strategic components to be manufactured in composite materials for reducing weight, although new questions regarding electrical conductivity have arisen such as static discharge, electrical bonding and grounding, interference shielding and current return through the structure.These functions can be met by the use of technologies based on nanocomposites, which inde ...
Read Project

 14

 FINISHED 

Development of an automated digital radiography system for the inspection of plastic electronics (PlastronicsSpec)

Start date: Nov 1, 2011, End date: Dec 31, 2013,

Plastic electronics is a general term used to describe electronic devices based on electrically conducting polymers i.e. organic electronic materials as opposed to solid state inorganic electronic materials like silicon etc. These materials hold promise of a future revolution in consumer electronics because both the devices and circuit connections based on them can be physically flexible and produ ...
Read Project

 8

 FINISHED 

High Productivity Electron Beam Melting Additive Manufacturing Development for the Part Production Systems Market (FastEBM)

Start date: Dec 1, 2011, End date: Nov 30, 2013,

Electron beam melting additive manufacture is used to produce successive layers of a part in a powder bed and offers the ability to produce components closest to their final dimensions, with good surface finish. At this time the process is faster than any other technique of comparable quality, however the parts are not produced at sufficient rate to make them economically viable for any but very h ...
Read Project

 8

 FINISHED 

Early Recognition, Monitoring and Integrated Management of Emerging, New Technology Related Risks (iNTeg-Risk)

Start date: Dec 1, 2008, End date: May 31, 2013,

... initiated from an empirical basis of 17 individual emerging risk issues (Emerging Risk Representative industrial Applications), and generalize their solutions addressing new technologies, products/materials, production and policies. The solutions will be validated in a second application cycle, and the overall solution made available to stakeholders in the form of the iNTeg-Risk platform: a ”one- ...
Read Project

 67

 FINISHED 

Nano-structured Aluminium Oxide Coatings (NANOCOAT)

Start date: Dec 1, 2010, End date: Nov 30, 2012,

...unctionality and new coating applications for aluminium anodisation processes in surface engineering. Project will advance recent innovations towards preparation of ordered nanoporous, nanostructured materials using anodisation methods and applying them to develop commercially relevant novel materials and address the market potential for these improved materials. The nanostructuring process is the ...
Read Project

 8

 FINISHED 

The development of a graduated radar-absorbing multi-layer structure for wind turbine applications to enable their positioning in areas of optimal power generation (OSGRAM)

Start date: Nov 1, 2009, End date: Apr 30, 2012,

...gly being rejected. As a result of the radar interference issues, wind energy companies are desperately looking for a solution. Although both electronic radar solutions and the use of Radar Absorbing Materials (RAMs) coated onto the turbines have been considered, no cost-effective solution has as yet been produced. Current RAMs are far too expensive and their performance is not sufficient for wind ...
Read Project

 9

 FINISHED 

MULTIFUNCTIONAL LAYERS FOR SAFER AIRCRAFT COMPOSITES STRUCTURES (LAYSA)

Start date: Sep 1, 2008, End date: Dec 31, 2011,

"The use of composite materials in aeronautics industry has increased constantly over the last 35 years, due mainly to their high specific strength and stiffness combined with the possibility of designing complex geometry components that are more aerodynamically efficient than metals. But due to organic nature of polymeric matrix component, composite materials are electrically and thermally bad co ...
Read Project

 12