Search for European Projects

17 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Development of high-performance, hyperfluorescence OLEDs for use in display applications and solid state lighting (HyperOLED)

Start date: Jan 1, 2017, End date: Dec 31, 2019,

The overall goal of the HyperOLED project is to develop materials and matching device architectures for high-performance, hyperfluorescence organic light emitting diodes (OLEDs) for use in display applications and solid state lighting. The innovative OLEDs will be realised by combining thermally activated delayed fluorescence (TADF) molecular hosts with novel shielded fluorescence emitters, target ...
Read Project

 5

 FINISHED 

Strategic and Targeted Support for Europe-Ukraine Collaboration in Aviation Research (AERO-UA)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

The overall aim of the AERO-UA project is to stimulate aviation research collaboration between the EU and Ukraine through strategic and targeted support. AERO-UA is focused solely on Ukraine, because the country has a huge aerospace potential but a low level of aviation research collaboration with the EU. Ukraine’s aerospace sector spans the full spectrum of systems and components development and ...
Read Project

 9

 FINISHED 

International and intersectoral mobility to develop advanced scintillating fibres and Cerenkov fibres for new hadron and jet calorimeters for future colliders (INTELUM)

Start date: Mar 1, 2015, End date: Feb 28, 2019,

Currently, new concepts are being considered for hadron and jet calorimetry in high energy physics experiments, in order to improve the energy resolution of these detectors by a factor of at least two. This is a prerequisite for future studies at the high luminosity, large hadron collider as well as at future electron and proton colliders. Amongst the few concepts being proposed, scintillating and ...
Read Project

 8

 FINISHED 

Boosting the scientific excellence and innovation capacity in additive manufacturing of the Technical University of Cluj-Napoca (AMaTUC)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

...e 3 year project will build upon the existing strong research and innovation base of TUCN and its twinning partners Loughborough University (LbU), FH Aachen University of Applied Sciences (ACUAS) and Intelligentsia Consultants (Intelligentsia). The AMaTUC project aims to boost TUCN and twinning partners' scientific excellence and innovation capacity in additive manufacturing, as well as implementi ...
Read Project

 4

 FINISHED 

Reinforcing the scientific excellence and innovation capacity in logistics technologies of the University of Miskolc (UMi-TWINN)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

...year project will build upon the existing strong research and innovation base of UMi and its twinning partners Fraunhofer-Gesellschaft e.V. IFF (Fraunhofer), Technische Universitaet Graz (TUGraz) and Intelligentsia Consultants (Intelligentsia). The UMi-TWINN project aims to boost UMi and twinning partners' scientific excellence and innovation capacity in logistics technologies, as well as implemen ...
Read Project

 4

 FINISHED 

Boosting the scientific excellence and innovation capacity in digital holographic microscopy of the Institute of Applied Physics of the Academy of Sciences of Moldova (HOLO)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

...lied Physics of the Academy of Sciences of Moldova (IAP-ASM) by creating a network with the high-quality Twinning partners: Universität Stuttgart (USTUTT), Tampere University of Technology (TUT) and Intelligentsia Consultants (Intelligentsia). To achieve this aim, the 3 year project will build upon the existing strong research and innovation base of IAP-ASM and its Twinning partners.To boost their ...
Read Project

 4

 FINISHED 

Increasing the scientific excellence and innovation capacity in Advanced Scintillation Materials of the Institute of Physics from the Czech Academy of Sciences (ASCIMAT)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

...: European Organization for Nuclear Research (CERN), Institut Lumière Matière - Université Claude Bernard Lyon 1 (ILM-Université Lyon 1), Università degli Studi di Milano - Bicocca (UNIMIB), and Intelligentsia Consultants (Intelligentsia). To achieve this aim, the 3 year project will build upon the existing strong research and innovation base of FZU and its Twinning partners.To boost their scienti ...
Read Project

 6

 FINISHED 

New paradigms for high efficiency blue emitters for white OLEDS (PHEBE)

Start date: Feb 1, 2015, End date: Jan 31, 2018,

The overall objective of the PHEBE project is to develop innovative, high-efficiency, blue emitters for white OLEDS, which will create a major breakthrough in the cost performance of OLED lighting. To produce the innovative blue emitters, two new types of molecular systems – without rare earth complexes - will be investigated: • intramolecular charge transfer systems that enable thermally activate ...
Read Project

 6

 FINISHED 

Supporting the Uptake of Agri-Food Research Results into Innovation with EPC countries (SUAFRI-EPC)

Start date: Mar 1, 2014, End date: Feb 28, 2017,

"The overall aim of the SUAFRI-EPC project is to bridge the gap between Agri-Food research and innovation in Eastern Partnering Countries (EPC), by bringing together all actors of the knowledge value chain and raising their awareness on how to uptake research results into innovation. The SUAFRI-EPC is supporting the Agri-Food sector and community in EPC by developing the basis for an efficient "" ...
Read Project

 11

 FINISHED 

Reinforcing cooperation with Eastern Partnership countries on bridging the gap between research and innovation for inclusive and secure societies (SECURE-R2I)

Start date: Oct 1, 2013, End date: Sep 30, 2016,

"The overall aim of the SECURE-R2I project is to reinforce cooperation with Eastern Partnership Countries (EPC) on bridging the gap between research and innovation for Horizon 2020 Societal Challenge 6. “Inclusive, Innovative and Secure Societies”. The research domains encompassed by “Inclusive, Innovative and Secure Societies” are broad. From the perspective of FP7 thematic priorities, they inclu ...
Read Project

 12

 FINISHED 

Enabling small-to-medium sized oven technology producers and bakeries to exploit innovative Low Energy Ovens (LEO)

Start date: Jan 1, 2014, End date: Dec 31, 2015,

The LEO project will enable small-to-medium sized oven producers and bakeries to exploit two key research results from the completed FP6 EU-FRESHBAKE project, “Freshly Baked Breads with Improvement of Nutritional Quality and Low Energy Demanding for the Benefit Of the Consumer and of the Environment” (Project no. 036302).The key results to be exploited in the LEO project consist in an Infrared ove ...
Read Project

 10

 FINISHED 

Deployment of Societally Beneficial Nano- and Material Technologies in European Partnership Countries (NANOMAT-EPC)

Start date: Nov 1, 2013, End date: Oct 31, 2015,

NANOMAT-EPC aims to support the deployment of societally beneficial nano- and materials technologies in European Partnership countries (EPC), in order to increase exploitation of their scientific results and contribute to the United Nations Millennium Development Goals. Consequently, NANOMAT-EPC aims to develop knowledge and technology transfer in nano- and materials technologies for healthcare, c ...
Read Project

 10

 FINISHED 

"Integrating the National Aerospace University ""KhAI"" into ERA" (KhAI-ERA)

Start date: Dec 1, 2011, End date: May 31, 2015,

... Brno University of Technology, Fraunhofer Institute for Factory Operation and Automation, Centre for Integrated Electronic Systems and Biomedical Engineering, Tallinn University of Technology, and Intelligentsia Consultants. The capacity building activities will involve knowledge exchange, setting up joint experiments, and training development for KhAI researchers focused on composite materials, ...
Read Project

 6

 FINISHED 

Integrating the Institute for Physical Research of the National Academy of Sciences of the Republic of Armenia into ERA (IPERA)

Start date: Dec 1, 2011, End date: Nov 30, 2014,

...terdisciplinaire Carnot de Bourgogne, Centre National de la Recherche Scientifique; (2) Laboratoire de Physico-Chimie des Materiaux Luminescents, Centre National de la Recherche Scientifique, and (3) Intelligentsia Consultants Ltd, and with 3 subcontracted experts from Technische Universität Kaiserslautern, University of Latvia, and CERN.The cooperation capacity will involve (i) twinning activitie ...
Read Project

 4

 FINISHED 

Reinforcing Nanostructured material research cooperation between the Unité de Développement de la Technologie du Silicium (UDTS) and the European Research Area (ERA) (NaS-ERA)

Start date: Oct 1, 2011, End date: Sep 30, 2014,

...novation organisations: 1) CNRS – Laboratoire de Physique de la Matière Condensée, 2) National Institute of Metrological Research, 3) Fraunhofer Institute for Mechanics of Materials, and 4) Intelligentsia Consultants.The capacity building activities will involve twinning and training development for UDTS researchers focused on the Production of functional nanostructures, the Development of new det ...
Read Project

 6

 FINISHED 

Reinforcing Additive Manufacturing research cooperation between the Central Metallurgical Research and Development Institute and the European Research Area (AdM-ERA)

Start date: Oct 1, 2011, End date: Mar 31, 2014,

...titution via capacity building activities with the following 3 excellent European research and innovation organisations: i) Loughborough University, ii) Technical University of Cluj-Napoca, and iii)Intelligentsia Consultants Ltd.
Read Project

 5

 FINISHED 

Strengthening sensor research links between the Georgian Technical University and the European Research Area (SENS-ERA)

Start date: Dec 1, 2011, End date: Nov 30, 2013,

...y building activities with the following 3 excellent European research and innovation organisations:1. Cranfield University (Cranfield),2. Technological Educational Institute of Piraeus (TEIPIR),3. Intelligentsia Consultants (Intelligentsia)The capacity building activities will involve twinning and training of GTU researchers focused on the three research topics as well as the FP7 programmes (e.g. ...
Read Project

 5