Search for European Projects

28 European Projects Found

Searched on 125080 European Projects

 FINISHED 
In order to unlock the full potential of Europe’s offshore resources, network infrastructure is urgently required, linking off-shore wind parks and on-shore grids in different countries. HVDC technology is envisaged but the deployment of meshed HVDC offshore grids is currently hindered by the high cost of converter technology, lack of experience with protection systems and fault clearance componen ...
Read Project

 35

 FINISHED 
REMOURBAN aims at the development and validation in three lighthouse cities (Valladolid-Spain, Nottingham-UK and Tepebasi/Eskisehir-Turkey) of a sustainable urban regeneration model that leverages the convergence area of the energy, mobility and ICT sectors in order to accelerate the deployment of innovative technologies, organisational and economic solutions to significantly increase resource and ...
Read Project

 22

 FINISHED 

Open Sea Operating Experience to Reduce Wave Energy Cost (OPERA)

Start date: Feb 1, 2016, End date: Jul 31, 2019,

Europe is endowed with abundant wave energy which could cover some 10% of its electricity needs with a clean, predictable and job-creating resource, which EU companies are at the forefront exploiting with little dependence on foreign suppliers.There remain important technical challenges to bring down costs to within investors’ reach, as a top priority open-sea operating experience must be analyse ...
Read Project

 12

 FINISHED 
"A group of eight Transmission System Operators with a generator company, manufacturers and research organisations, propose 5 demonstration projects to remove, in 4 years, several barriers which prevent large-scale penetration of renewable electricity production in the European transmission network. The full scale demonstrations led by industry aim at proving the benefits of novel technologies cou ...
Read Project

 39

 FINISHED 
Unlike the control and observability put in service in HV/MV, LV networks are still being substantially managed as usual: no visibility of power and voltage or grid components status, poor knowledge of connectivity, manual operation of switches or few tools for worker support. The LV grid characteristics (radial topology, exposition to local disturbances, local accumulation of distributed generati ...
Read Project

 20

 FINISHED 

HPC for Energy (HPC4E)

Start date: Dec 1, 2015, End date: Nov 30, 2017,

This project aims to apply the new exascale HPC techniques to energy industry simulations, customizing them, and going beyond the state-of-the-art in the required HPC exascale simulations for different energy sources: wind energy production and design, efficient combustion systems for biomass-derived fuels (biogas), and exploration geophysics for hydrocarbon reservoirs.For wind energy industry HPC ...
Read Project

 8

 FINISHED 
A new EU 7th Framework Programme project, “LEANWIND” (Logistic Efficiencies And Naval architecture for Wind Installations with Novel Developments) seeks to apply lean principles to the offshore wind farm project lifecycle. The primary LEANWIND objective is to provide cost reductions across the offshore wind farm lifecycle and supply chain through the application of lean principles and the developm ...
Read Project

 32

 FINISHED 

Advanced Safety Assessment : Extended PSA (ASAMPSA_E)

Start date: Jul 1, 2013, End date: Dec 31, 2016,

The Fukushima nuclear accident in Japan resulted from the combination of two correlated extreme external events (earthquake and tsunami). The consequences (flooding in particular) went beyond what was considered in the initial NPP design. Such situations can be identified using PSA methodology that complements the deterministic approach for beyond design accidents. If the performance of a Level 1 ...
Read Project

 29

 FINISHED 

Optimal Design Tools for Ocean Energy Arrays (DTOCEAN)

Start date: Oct 28, 2013, End date: Oct 27, 2016,

The DTOcean project is aimed at accelerating the industrial development of ocean energy power generation knowledge, and providing design tools for deploying the first generation of wave and tidal energy converter arrays.The areas of hydrodynamic array layout, electrical infrastructure, operations, maintenance & control, moorings & foundations, and installation & logistics bring critical challenges ...
Read Project

 19

 FINISHED 

Stable Interfaces for Rechargeable Batteries (SIRBATT)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

SIRBATT (Stable Interfaces for Rechargeable Batteries) is a multisite collaborative project consisting of 12 full partners from the European Area (6 Universities, 1 Research Institute and 5 industrial partners). Collaboration with leading battery research groups in the USA and Japan is also considered. The diversity of the research organisations in the partnership has been chosen to provide a wide ...
Read Project

 13

 FINISHED 
As the patterns of power generation and distribution are rapidly changing in Europe towards a highly dispersed and volatile system, Distribution System Operators need to completely change traditional ways of grid operations. Currently developed solutions to increase the intelligence of medium and low voltage grids to cope with this task are often highly specialized, non-replicable and therefore no ...
Read Project

 13

 FINISHED 

IntegratinG Renewables in the EuropEaN Electricity Grid (IGREENGRID)

Start date: Jan 1, 2013, End date: Mar 31, 2016,

IGREENGrid focuses on increasing the hosting capacity for Distributed Renewable Energy Sources (DRES) in power distribution grids without compromising the reliability or jeopardizing the quality of supply. Based on the experience of six world class DRES integration Demo Projects in low & medium voltage grids (led by some of EEGI members; Distribution System operators –DSOs-) and other EU initiativ ...
Read Project

 12

 FINISHED 
Grid4EU project is an innovative SmartGrid project proposed by a group of Distribution System Operators (from Czech Republic, France, Germany, Italy, Spain and Sweden), in close partnership with a set of electricity retailers, manufacturers and research organizations.Adopting a systemic approach and organized around large-scale demonstrations networks located in six different countries, its struct ...
Read Project

 28

 FINISHED 

CO2 capture and bio-fixation through microalgal culture (CO2ALGAEFIX)

Start date: Sep 1, 2011, End date: Dec 31, 2015,

Background According to the European Environment Agency, energy consumption accounts for 80% of all greenhouse gas (GHG) emissions in the EU. It is one of the primary risk factors for climate change and for most forms of air pollution. The EU is committed to reducing GHG emissions to a level that will contribute to limiting the global temperature increase ...
Read Project

 7

 FINISHED 

EERA Design Tools for Offshore Wind Farm Cluster (EERA-DTOC)

Start date: Jan 1, 2012, End date: Jun 30, 2015,

The European Energy Research Alliance (EERA) together with some high-impact industry partners addresses the call proposing an integrated and validated design tool combining the state-of-the-art wake, yield and electrical models available in the consortium, as a plug-in architecture with possibility for third party models. To decrease uncertainties around wind farm wake predictions, a small measur ...
Read Project

 23

 FINISHED 
ICT 4 EVEU is a project born with the aim of deploying an innovative set of ICT services for electric vehicle (EV) in different and complementary pilots across Europe. The scope of the ICT services is the integration of different management systems operating on the existing EV infrastructures in the cities where the pilots will be run, so that related services are deployed making use of these inte ...
Read Project

 17

 FINISHED 
Green eMotion aims at enabling mass deployment of electromobility in Europe. To achieve this, major players from industry, the energy sector, municipalities as well as universities and research institutions have joined forces to develop and demonstrate a commonly accepted and user-friendly framework consisting of interoperable and scalable technical solutions in connection with a sustainable busin ...
Read Project

 44

 FINISHED 

Active Demand Value ANd Consumers Experiences Discovery (ADVANCED)

Start date: Dec 1, 2012, End date: Nov 30, 2014,

Active Demand (AD) has the potential to contribute to solving the challenges of electricity systems and offers significant benefits to consumers. There are only few real AD programmes being implemented in Europe and the results of AD pilots are rather fragmented. AD is considered one of the largest untapped energy resources. The main reason behind it is insufficient consumer awareness regarding th ...
Read Project

 10

 FINISHED 
A group of 6 Transmission System Operators (Belgium, Denmark, France, Germany The Netherlands and Spain) with 2 generator companies, 5 manufacturers and research organisations, propose 6 demonstration projects to remove, in 3 years, several barriers which prevent the electric system from welcoming more wind electricity, and wind electricity from contributing more to the electric system. The full s ...
Read Project

 29

 FINISHED 
iNTeg-Risk is a large-scale integrating project aimed at improving the management of emerging risks in the innovative industry. This will be achieved by building a new risk management paradigm for emerging risks, which is a set of principles supported by a common language, commonly agreed tools & methods and Key Performance Indicators integrated into a single framework. As main impact, it will red ...
Read Project

 67

 FINISHED 
"ADDRESS will research, develop and deploy technologies and processes to increase usage of Distributed Generation and Renewable Energy Resources thereby engaging in a new relationship between customers, generators and network operators. ADDRESS aims to develop new innovative architectures for Active Distribution Networks (ADN) able to balance in real time power generation and demand allowing netwo ...
Read Project

 27

 FINISHED 

Future INternet for Smart ENergY (FINSENY)

Start date: Apr 1, 2011, End date: Apr 30, 2013,

The energy sector has entered a period of major change which will continue for many years to come. The increasing proportion of electricity from renewable sources means that the architecture of the energy grid will have to support the distributed, in addition to the centralised, generation of energy and to adapt to a highly volatile supply e.g. from wind and solar generators. From the consumption ...
Read Project

 41

 FINISHED 
European energy industry is facing three major challenges:a) the increased integration of renewable, fluctuating power resources to achieve the climate goals,b) increased "smartness" especially in the electrical distribution grid to cope with increasing capacity requirements and finallyc) the stakeholder diversification separating grid operation, power provisioning, metering services, auxiliary se ...
Read Project

 9

 FINISHED 
Background Biomass is expected to become a vital renewable energy resource because of its wide availability and storage possibilities. Compared with other renewable energy sources, biomass can produce peak performance on short notice if possibilities to store the raw material exist. Moreover, a multitude of technical methods are available for recovering e ...
Read Project

 17

 FINISHED 
The objective of this coordination action is to develop best practice guidelines for the performance of Level-2 PSA methodologies with a view to harmonization at EU level and allowing a meaningful and practical uncertainty evaluation in a Level-2 PSA. Speficic relationships with community in charge of nuclear reactor safety (utilities, safety authorities, vendors, research or services companies) ...
Read Project

 23

 FINISHED 
The general objective of this Thematic Network (TN) is to foster and promote large-scale integration of domestic and distributed micro generation and improve energy efficiency through the implementation of innovative ICT solutions into local smart power grids.The TN will bring together key relevant players in the telecommunications and energy sector. They will overview and provide insight of exist ...
Read Project

 15

 FINISHED 
Regular in-service inspection is important to verify the integrity of welded nozzle sections in nuclear and other safety critical facilities. Nozzle sections made from austenitic steel can be susceptible to rapid crack growth due to thermal fatigue and stress corrosion. Early detection of cracks is therefore essential to ensure the continued safe operation of the facility in question. In order to ...
Read Project

 8

 FINISHED 

Open Public Extended Network metering (OPEN meter)

Start date: Jan 1, 2009, End date: Jun 30, 2011,

New smart multi-metering or multi-functional Advanced Metering Infrastructure (AMI) is capable of creating value for energy consumers, network operators, metering operators and retailers. AMI will provide better services for customers in various ways: not only by more accurate metering and billing, but also by easing the supplier switching process and also by facilitating demand response to price ...
Read Project

 20