Search for European Projects

5 European Projects Found

Searched on 125080 European Projects

 FINISHED 
...ces will be reduced or even completely removed, and the atmospheric emissions of these gases will be reduced because the CO2 will be captured and reused. The project will be carried out in the Iberdrola Combined Cycle Gas Turbine (CCGT) plant in Castellón, where the CO2 will act as an inhibitor of macrofouling. The results will be fully replicable in similar industrial sectors. More specificall ...
Read Project

 7

 FINISHED 
Grid4EU project is an innovative SmartGrid project proposed by a group of Distribution System Operators (from Czech Republic, France, Germany, Italy, Spain and Sweden), in close partnership with a set of electricity retailers, manufacturers and research organizations.Adopting a systemic approach and organized around large-scale demonstrations networks located in six different countries, its struct ...
Read Project

 28

 FINISHED 

CO2 capture and bio-fixation through microalgal culture (CO2ALGAEFIX)

Start date: Sep 1, 2011, End date: Dec 31, 2015,

Background According to the European Environment Agency, energy consumption accounts for 80% of all greenhouse gas (GHG) emissions in the EU. It is one of the primary risk factors for climate change and for most forms of air pollution. The EU is committed to reducing GHG emissions to a level that will contribute to limiting the global temperature increase ...
Read Project

 7

 FINISHED 
Green eMotion aims at enabling mass deployment of electromobility in Europe. To achieve this, major players from industry, the energy sector, municipalities as well as universities and research institutions have joined forces to develop and demonstrate a commonly accepted and user-friendly framework consisting of interoperable and scalable technical solutions in connection with a sustainable busin ...
Read Project

 44

 FINISHED 
Regular in-service inspection is important to verify the integrity of welded nozzle sections in nuclear and other safety critical facilities. Nozzle sections made from austenitic steel can be susceptible to rapid crack growth due to thermal fatigue and stress corrosion. Early detection of cracks is therefore essential to ensure the continued safe operation of the facility in question. In order to ...
Read Project

 8