Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

New Energy Efficient Demonstration for Buildings (NEED4B)

Start date: Feb 1, 2012, End date: Jan 31, 2018,

NEED4B aims to develop an open and easily replicable methodology for designing, constructing, and operating new low energy buildings, aiming to a large market uptake. The NEED4B methodology will be validated and refined by a strong demonstration programme, envisaging the construction of 27.000 square meters, spread among five different climatic zones, buildings types and uses.The weighted average ...
Read Project

 16

 FINISHED 
With numerous European industries heavily depended on imported REE raw materials, there is a need for EU to secure a viable supply of REE minerals as well as develop from the ground up the currently non-existent European REE extraction and processing industry. The goal of the EURARE project will be (i) to characterize the potential REE resources in Europe; and (ii) to research, develop, optimize a ...
Read Project

 23

 FINISHED 
Despite recent evolutions of tools/practices in the Architecture Engineering, Construction and Facility Management have already resulted in considerable advances, some limitations remain, related to the complexity and variability of building life cycles, addressing building end user awareness and participation, lack of new business models, life cycle fragmentation, limited interoperability of the ...
Read Project

 21

 FINISHED 
CommONEnergy focuses on existing shopping malls to be refurbished and buildings with a different original function, redesigned to become shopping malls. Wholesales&Retail buildings represent 28% of the total non-residential building stock (BPIE, 2010), accounting for approximately 157 Mtoe in 2005 (EU EEAP). Considering typical shopping malls high impact on modern society (ICSC, 2008), the project ...
Read Project

 23

 FINISHED 
Buildings consume about 40% of total final energy in Europe, and those built before 1980 represent 95% of this energy consumption. The low renovation rate of building stock (1% per year) means that boosting energy efficient buildings’ retrofitting is the only way to reach EU’s “20-20-20” targets. The higher impact will be achieved through interventions in non-residential buildings, as their energy ...
Read Project

 22

 FINISHED 
"The challenge of today lies in the accomplishment of sustainable and low-energy buildings, which can combine at the same time the thermal insulation properties with healthy, comfortable, accessible and safe indoor environment. Reduction of the energy demand through the use of insulating materials still remains a challenge for European architects and building designers as well as materials produce ...
Read Project

 15

 FINISHED 
R2CITIES aims to develop and demonstrate an open and easily replicable strategy for designing, constructing, and managing large scale district renovation projects for achieving nearly zero energy cities. For this purpose, it will be developed a demonstration and dissemination framework of very innovative strategies and solutions for building energy renovation at district level, based in the follow ...
Read Project

 16

 FINISHED 

Combined Efficient Large Scale Integrated Urban Systems (CELSIUS)

Start date: Apr 1, 2013, End date: Mar 31, 2017,

The CELSIUS City Consortium is going to deploy 12 new technically and economically innovative demonstrators. Another up to 20 state-of-art demonstrators (already in operation) will proof the CELSIUS City Concept covering the full FP7 8.8.2 requirements.CELSIUS has a clear strategy and a pro-active approach to Market Outreach, which will strive to commit 50 new cities to the CELSIUS Roadmap by the ...
Read Project

 21

 FINISHED 
Growing water demand caused by climate change, urbanization and population growth requires new business and technology platforms to manage the increased level of diversity and complexity of urban water resources management. The increasing variability of both supply and consumption will also require more sophisticated and optimized decision making.To achieve a step change in water and energy saving ...
Read Project

 13

 FINISHED 
Construct-PV will develop and demonstrate customizable, efficient, and low cost BIPV for opaque surfaces of buildings. Opaque surfaces are selected because they represent massive wide-area spaces of untapped harvesting potential across Europe. To develop highly efficient systems, most promising PV technologies have been selected, i.e. back contact cells fabricated with MWT technology, extensively ...
Read Project

 12

 FINISHED 
"Motivated by the opportunity to develop industry pull applications and services for the European EGNOS and GALILEO satellite systems, SPARTACUS will design, realise, test and validate in simulated and real world scenarios GALILEO-ready tracking/positioning solutions for critical asset tracking and crisis management. Integrating, adapting, and improving hardware, software, communication, and trac ...
Read Project

 14

 FINISHED 
"Cellulose, the primary structural component of plants, is the most ubiquitous and abundant organic compound on the planet. When cellulose fibrils are processed under carefully controlled conditions, it is possible to release highly crystalline nano-particles known as “nano crystalline cellulose (NCC)”. Recently, NCC-FOAM partners have developed a unique technique for self-assembling NCC into high ...
Read Project

 13

 FINISHED 
INDICATE proposes a novel city-wide decision support system which accounts for all major systems and activities relevant to developing energy-efficient cities. To create a 'Smart Economy', integrated smart urban planning tools including architectural masterplanning and detailed energy optimisation and environmental analysis will be required. If this is not addressed, we will be unable to deliver ...
Read Project

 8

 FINISHED 
ICT is recognized as being a key player against climate change: pervasive sensors and actuators can efficiently control the whole energy chain (Smart Thermal/Electricity Grid). On the other side, advances on 3D modeling, visualization and interaction technologies enable user profiling and real-time feedback to promote energy efficient behaviors. To unlock the potentiality of these technologies, th ...
Read Project

 15

 FINISHED 
In the last decade, advanced textiles materials have been developed as a result of a number of research and innovation projects addressing in particular the construction sector, which represent one of the biggest markets for textile products. Examples of advanced textiles for the construction sector comprise fabrics used for the rehabilitation of buildings, providing both strengthening and monitor ...
Read Project

 14

 FINISHED 
Growing investments in distributed energy resources (DER) – renewable distributed energy generation combined with demand response, energy storage, plug-in electric vehicles and active management of distribution networks – will require new business and technology platforms to manage the increased level of diversity and complexity of global energy management. The increasing variability of both gener ...
Read Project

 14

 FINISHED 
"About 40% of overall energy consumption in Europe is related to the building sector and over 50% of all materials extracted from earth are transformed into construction materials and products. With more than 70% of the building stock built before the first energy crisis (1970’s), energy retrofitting of buildings is envisaged as the most promising strategy to reach EU’s “20-20-20” targets. However ...
Read Project

 12

 FINISHED 
Air-conditioning is a rapidly growing electrical end-use in EU. A/C systems reduce temperature of the ambient air while removing humidity. However such combined air conditioning/dehumidification is generally inefficient. A promising approach is represented by Hybrid Liquid Desiccant (HLD) systems, where the latent load is removed by a liquid desiccant dehumidifier, while the sensible load is remov ...
Read Project

 12

 FINISHED 

Total Operation management for Safety Critical Activities (TOSCA)

Start date: Feb 1, 2013, End date: Jan 31, 2016,

Over the recent past the accumulation of major mishaps, crises and accidents have made it clear that organisations must still improve their capabilities to address safety “not a stand-alone activity that is separate from the main activities and processes of the organization” but as an integrated part of critical project management. Further it is critical also to understand how weaknesses not only ...
Read Project

 16

 FINISHED 
Energy use in buildings accounts for approximately 40% of EU energy consumption. Energy efficiency in new buildings is important, but existing building stock is the main target. Existing buildings, however, are characterised by particular requirements and constraints that are not present in new buildings and that requires new developments and adaptation of existing technologies.In order to fulfil ...
Read Project

 18

 FINISHED 
A review of the embodied energy values of the various building materials shows that the embodied energy of the most widely used insulation materials in construction applications is characterised by very high values. This mainly results either from the energy intensive conditions applied for the manufacturing of the mineral based insulation materials or from the high embodied energies of the oil-ba ...
Read Project

 15

 FINISHED 
XXL-REFRESH is built upon the results obtained by the REFRESH project (GA 262494), in which the project team demonstrated the feasibility of transportation of large quantities of fresh water by the sea using modular flexible barges. The key innovation introduced by REFRESH is the use of open modular textile containers connected by extra-strong watertight zips and the use of an online monitoring sy ...
Read Project

 8

 FINISHED 

High-Precision micro-forming of complex 3D parts (HIPR)

Start date: Nov 1, 2012, End date: Oct 31, 2015,

Today, Europe’s leading position in manufacturing of formed, high-precision 3D metal parts is being threatened by developed non-EU countries that catch up quickly on product quality at low cost. If no further action is taken, loss of jobs and GDP are at risk. To face global competition, a breakthrough is needed in tackling the following four challenges: - Continuous product trend for higher qualit ...
Read Project

 9

 FINISHED 
READY4SmartCities operates in a European context where other initiatives are currently running in order to create a common approach on Smart Cities, Such initiatives, even if of fundamental importance for the EU, have some relevant gaps not allowing them to fully cover fundamental aspects for Smart Cities, i.e. to define a common data framework allowing full interoperability among different city s ...
Read Project

 11

 FINISHED 
The threat of attacks to passenger airplanes with explosives hidden in luggage loaded in the cargo holds or taken onboard is dramatically evident from terrorist events in the last years.FLY-BAG2 aim is to develop innovative solutions based on novel lightweight materials and structural concepts for the mitigation of the effects of an onboard blast and improve aircraft survivability.Direct strengthe ...
Read Project

 13

 FINISHED 
"Due to barriers that exist in when considering the sustainability of the built environment, optimising energy efficiency in buildings is often a management issue and not one of design. In many cases, it is the organisation responsible for the building that makes the decision with respect to where best to invest their limited resources. For this reason, decision support tools, providing informat ...
Read Project

 12

 FINISHED 
The NANO-HVAC project concept aims at developing an innovative approach for ducts insulation while introducing new cleaning and maintenance technologies, all enabled by cost-effective application of nanotechnology. The main concepts are:1. Safe, high insulating HVAC-ducts enabling minimization of heat/cool losses: cost-effective, safe and extremely thin insulating duct layers that can be applied ...
Read Project

 11

 FINISHED 
The overall aim of the project is to create an integrated community that will drive innovation in the field of critical raw material substitution for the benefit of EU industry. The project will:•Deliver a mapping of on-going initiatives in the field of substitution of CRM at the EU level and Member States that will allow for the identification of key champions and synergies. The mapping will also ...
Read Project

 21

 FINISHED 

ICT for Energy Efficient Airports (CASCADE)

Start date: Oct 1, 2011, End date: Mar 31, 2015,

CASCADE will develop facility-specific measurement-based energy action plan for airport energy managers underpinned by systematic Fault Detection Diagnosis (FDD) Methods. CASCADE will develop a framework and methodology to underpin the execution of customised ICT solutions building upon existing ICT infrastructure. A measurement framework and minimal data set will be established that control and b ...
Read Project

 9

 FINISHED 

Sounds for Energy Control of Buildings (S4ECoB)

Start date: Oct 1, 2011, End date: Mar 31, 2015,

S4ECoB will develop and deliver a prototype to optimize the existent Building Management Systems (BMS) by means of acquiring, identifying, monitoring, and adding the parameter of "occupancy level" in buildings and surroundings to enhance operations and eliminate unnecessary consumptions of energy for Heating, Ventilation, Air Conditioning, Lighting (HVACL), and other existent production and consum ...
Read Project

 8

 FINISHED 
Force 7 aims to develop an innovative oil spill recovery system for operation in rough sea conditions.The new system is based on the use of interconnected mops to create a large, wide mop net which will maximize the oil encounter rate on the surface of the sea whilst it is dragged to adsorb the slick. The system is extremely versatile because it only requires one vessel to operate and that can be ...
Read Project

 7

 FINISHED 
Ageing of society is an issue of increasing importance for Europe. According to Eurostat, 36,5% of the European population is more than 50 years old and this percentage is constantly growing. In the next decades, Europe’s growth will increasingly depend on the ability to capitalise on the skills of ageing people: the goal set by EU for 2020 is to achieve an employment rate of 50% for older workers ...
Read Project

 7

 FINISHED 
The rational exploitation of oceans’ space and resources is increasingly seen as crucial to enhance European competitiveness in key areas such as Renewable Energy and Aquaculture. The H2OCEAN consortium aims at developing an innovative design for an economically and environmentally sustainable multi-use open-sea platform. The H2OCEAN platform will harvest wind and wave power, using part of the ene ...
Read Project

 19

 FINISHED 
The ambition of this project is to enable the utilisation of the full potential of renewable energy (up to covering 100% of the energy demand on district level). In order to reach this goal, the E-hub concept is developed, which is crucial for the implementation of such a large share of renewables. An E-Hub is a physical cross point, similar to an energy station, in which energy and information st ...
Read Project

 19

 FINISHED 

Valuable EneRgY for a smart School (VERYSchool)

Start date: Dec 1, 2011, End date: Nov 30, 2014,

VERYSchool will develop customised energy savings strategies and ICT solutions for EU schools. It will do this through the integration of Smart Lighting and LED technology, Smart Meters, Building Energy Management Systems, Energy Simulation Software, and Energy Action Management Software. Each of these technologies are brought to the project from consortium partners with companies dedicated specif ...
Read Project

 14

 FINISHED 
Residential buildings represent 60% of the building stock and the area where most of the potential to drastically reduce energy use and CO2 emissions lies. New directives push for deep retrofitting efforts, in order to achieve energy efficiency and RES adoption targets for 2020 and beyond. These require acting both on envelope and on energy use systems, mainly heating and DHW equipment that repres ...
Read Project

 17

 FINISHED 
Nu-Wave (FP7project 218479 Jan2009-Dec2011), supported textile machinery SMEs in developing a new generation of high-performance machines for facing the crisis and compete in the market with low labour cost countries (specially Far East). The MACH-to project starts on the basis of Nu-Wave results and aims at filling the gap that still separates them from the market.The Nu-Wave demonstrators were h ...
Read Project

 9

 FINISHED 
The overall objective of the FC-DISTRICT project is to optimize and implement an innovative energy production and distribution concept for sustainable and energy efficient refurbished and/or new “energy autonomous” districts exploiting decentralized co-generation coupled with optimized building and district heat storage and distribution network. The concept is based on dynamic heat exchange betwee ...
Read Project

 23

 FINISHED 
The EE-QUARRY project emerges from the necessity to control a very demanding energy-intensive industry, which characterizes from its high energy demands and enormous CO2 emissions. The goal is to improve energy efficiency and to reduce CO2 on quarries, through the develop of a new and highly effective modeling and monitoring Energy Management System technique. The use of crushed stone could increa ...
Read Project

 12

 FINISHED 
Primary aluminium production industry is the world’s larger industrial consumer of energy and ranked among the most CO2 intensive industries. It also generates enormous quantities of wastes that further decrease the exergy efficiency of its production process. However, this industry is one of the most vital sectors from economic and social point of view, not only for EU but also for the entire wor ...
Read Project

 10