Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Spins for Efficient Photovoltaic Devices based on Organic Molecules (SEPOMO)

Start date: Nov 1, 2016, End date: Oct 31, 2020,

Organic solar cells (OSCs) have the potential to become an environmental friendly, inexpensive, large area and flexible photovoltaics technology. Their main advantages are low process temperatures, the potential for very low cost due to abundant materials and scalable processing, and the possibility of producing flexible devices on plastic substrates. To improve their commercialization capacity, t ...
Read Project

 11

 FINISHED 

Nature Based Solutions for re-naturing cities: knowledge diffusion and decision support platform through new collaborative models (Nature4Cities)

Start date: Nov 1, 2016, End date: Oct 31, 2020,

Based on a detailed mapping of urban challenges and relevant nature-based solutions (NBS), Nature4Cities aims at developing complementary and interactive modules to engage urban stakeholders in a collective-learning process about re-naturing cities, develop and circulate new business, financial and governance models for NBS projects, as well as provide tools for the impacts assessment, valorisatio ...
Read Project

 26

 FINISHED 

Sustainable Integrated Management FOR the NEXUS of water-land-food-energy-climate for a resource-efficient Europe (SIM4NEXUS)

Start date: Jun 1, 2016, End date: May 31, 2020,

Land, food, energy, water and climate are interconnected, comprising a coherent system (the ‘Nexus’), dominated by complexity and feedback. The integrated management of the Nexus is critical to secure the efficient and sustainable use of resources. Barriers to a resource efficient Europe are policy inconsistencies and incoherence, knowledge gaps, especially regarding integration methodologies and ...
Read Project

 28

 FINISHED 

Innovative Ecological on-site Sanitation System for Water and Resource Savings (INNOQUA)

Start date: Jun 1, 2016, End date: May 31, 2020,

INNOQUA will accelerate the path to market of a modular set of innovative, patent protected, award winning and scalable fully ecological sanitation solutions that address wide market needs in rural communities, for agricultural industries, for sustainable home-builders or collective housing owners and for developing countries worldwide. The modular system is based on the purification capacity of b ...
Read Project

 20

 FINISHED 

LOW valued energy sources UPgrading for buildings and industry uses (LOWUP)

Start date: Nov 1, 2016, End date: Apr 30, 2020,

In the “secure, clean and efficient energy” initiative, it is stated that the most important milestones for such a transformation are the EU's energy and climate targets for 2030, which are: (i) at least 40% reduction in greenhouse gas emissions compared to 1990, (ii) at least 27% for the share of renewable energy consumed in the EU, and (iii) at least 27% improvement of energy efficiency and an e ...
Read Project

 13

 FINISHED 

1D Nanofibre Electro-Optic Networks (1D-Neon)

Start date: Apr 1, 2016, End date: Mar 31, 2020,

The vision of 1D-NEON proposal is to develop fibre-based smart materials along with an integrated technology platform for the manufacturing in Europe of new products with multi-sectorial applications in consumer electronics, energy, healthcare and fitness, smart buildings, sensors and e-skin for soft robotics.The overall objective of 1D-NEON is to build a modular platform for manufacturing fibre-b ...
Read Project

 14

 FINISHED 

Designing for People with Dementia: designing for mindful self-empowerment and social engagement (MinD)

Start date: Mar 1, 2016, End date: Feb 29, 2020,

This project aims to help people with dementia engage in social contexts to improve psychosocial wellbeing. People who are affected by Alzheimer’s disease or other dementias often face cognitive, behavioural and psychosocial difficulties, including impairment and degeneration of memory and of perceptions of identity. In a social context, this can cause difficulties of recognizing, relating to and ...
Read Project

 12

 FINISHED 

Optogenetic Protein Therapy for Multiple Sclerosis (OPTOGENERAPY)

Start date: Jan 1, 2017, End date: Jan 31, 2020,

Optogenerapy proposes a new interferon-ß (IFN-ß) drug delivery system to revolutionize Multiple Sclerosis treatment.The aim is to develop and validate a new bio-electronic cell based implant device to be implanted subcutaneously providing controlled drug release during at least 6 months. The cell confinement within a chamber sealed by a porous membrane allows the device to be easily implanted or r ...
Read Project

 11

 FINISHED 

Multiple-actOrs Virtual Empathic CARgiver for the Elder (MoveCare)

Start date: Jan 1, 2017, End date: Dec 31, 2019,

MoveCare develops and field tests an innovative multi-actor platform that supports the independent living of the elder at home by monitoring, assist and promoting activities to counteract decline and social exclusion. It comprises 3 hierarchical layers: 1) A service layer provides monitoring and intervention. It endows objects of everyday use with advanced processing capabilities and integrates th ...
Read Project

 14

 FINISHED 

Decentralised Citizens Owned Data Ecosystem (DECODE)

Start date: Dec 1, 2016, End date: Nov 30, 2019,

Today’s Internet is becoming increasingly centralised, slowing innovation and challenging its potential to revolutionise society and the economy in a pluralistic manner. DECODE will develop practical alternatives through the creation, evaluation and demonstration of a distributed and open architecture for managing online identity, personal and other data, and collective governance in a citizen-fri ...
Read Project

 14

 FINISHED 

KONFIDO - Secure and Trusted Paradigm for Interoperable eHealth Services (KONFIDO)

Start date: Nov 1, 2016, End date: Oct 31, 2019,

KONFIDO advances the state of the art of eHealth technology with respect to four key dimensions of digital security, namely: data preservation, data access and modification, data exchange, and interoperability and compliance. To address the challenges of secure storage and exchange of eHealth data, protection and control over personal data, and security of health related data gathered by mobile de ...
Read Project

 16

 FINISHED 

Personalised Connected Care for Complex Chronic Patients (CONNECARE)

Start date: Apr 1, 2016, End date: Sep 30, 2019,

The ambition of the CONNECARE consortium is to co-design, develop, deploy, and evaluate a novel smart, adaptive integrated care system for chronic care management. This will save European healthcare organisations huge sums whilst improving patient outcomes. The consortium contains all the necessary partners to ensure success.Based on the concept of 4P medicine, CONNECARE will provide decision supp ...
Read Project

 10

 FINISHED 

Highly Innovative building control Tools Tackling the energy performance GAP (HIT2GAP)

Start date: Sep 1, 2015, End date: Aug 31, 2019,

Measurement campaigns have shown major discrepancies in buildings energy performance between planned energy demand and real energy consumption, while nowadays most of the newly constructed offices buildings are equipped with BMS systems, integrating a more or less extended measurement layer providing large amounts of data. Their integration in the building management sector offers an improvement c ...
Read Project

 23

 FINISHED 

Robots to Re-Construction (Bots2ReC)

Start date: Feb 1, 2016, End date: Jul 31, 2019,

Despite the high degree of industrial automation, robotic solutions are not yet prevalent in construction and demolition industry due to the complex environment and demanding requirements. For hazardous tasks, like the removal of asbestos contamination from a flat (rehabilitation site), manual performance is very inefficient, due to the intense safety measures. This leads to the main objective of ...
Read Project

 8

 FINISHED 

Breakthrough solutions for adaptable envelopes for building refurbishment (BRESAER)

Start date: Feb 1, 2015, End date: Jul 31, 2019,

The overall objective of BRESAER project is to design, develop and demonstrate an innovative, cost-effective, adaptable and industrialized envelope system for buildings refurbishment including combined active and passive pre-fabricated solutions integrated in a versatile lightweight structural mesh:‒ Dynamic window with automatic and controlled air-tightness and insulated solar blinds complementin ...
Read Project

 17

 FINISHED 

Tight integration of EGNSS and on-board sensors for port vehicle automation (LOGIMATIC)

Start date: Mar 1, 2016, End date: Feb 28, 2019,

Annual volume at global container terminals will rise by a 5.6% rate during the next 5 years and reach 840 million TEU by 2018.The usual way for ports to deal with the increasing demand of sea transport and compete against competitors is to expand the port in the original site. There is scarcity of land available for port expansion in densely populated urban areas where most of European ports are ...
Read Project

 8

 FINISHED 

Built to Specifications: Self-Inspection, 3D Modelling, Management and Quality-Check Tools for the 21st Century Construction Worksite (Built2Spec)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

Built2Spec brings together a new and breakthrough set of technological advances for self-inspection and quality assurance that will be put into the hands of construction stakeholders to help meeting EU energy efficiency targets, new build standards, and related policy ambitions. B2S will expand upon a cloud based construction support platform, conceived following the most advanced integrated desi ...
Read Project

 21

 FINISHED 

European Clearing House for Open Robotics Development Plus Plus (ECHORD Plus Plus)

Start date: Oct 1, 2013, End date: Sep 30, 2018,

Description ECHORD++ will create new opportunities for European robotics researchers to work directly with SME/start-ups and new users/customers to create innovative products. ECHORD++ will continue ECHORD’s two pillars, “experiments” and “structured dialogue”, taking advantage of experience and investment in the infrastructure. In addition, ...
Read Project

 68

 FINISHED 

Processing and control of novel nanomaterials in packaging, automotive and solar panel processing lines (OptiNanoPro)

Start date: Oct 1, 2015, End date: Sep 30, 2018,

Nanocomposites are promising for many sectors, as they can make polymers stronger, less water and gas permeable, tune surface properties, add functionalities such as antimicrobial effects. In spite of intensive research activities, significant efforts are still needed to deploy the full potential of nanotechnology in the industry. The main challenge is still obtaining a proper nanostructuring of t ...
Read Project

 15

 FINISHED 

Binaural Tools for the Creative Industries (BINCI)

Start date: Jan 1, 2017, End date: Jun 30, 2018,

BINCI’s main objective is to develop an integrated software and hardware solution to ease the production, post-production and distribution of 3D audio content meant to be experienced by consumers through headphones. BINCI tools for binaural 3D audio production will be fully suitable to develop professional applications in the creative industries (e.g. music, video games, virtual and augmented rea ...
Read Project

 5

 FINISHED 

New Cost Efficient Business Models for Flexible Smart Grids (NOBEL GRID)

Start date: Jan 1, 2015, End date: Jun 30, 2018,

NOBEL GRID will develop, deploy and evaluate advanced tools and ICT services for energy DSOs cooperatives and medium-size retailers, enabling active consumers involvement –i.e. new demand response schemas – and flexibility of the market – i.e. new business models for aggregators and ESCOs.Through the dual-use of telecommunication networks, and validating the integration of renewable generation pre ...
Read Project

 24

 FINISHED 

Out of autoclave processes development for composite frames manufacturing with high production rate and low cost. (COFRARE 2.0)

Start date: Jul 1, 2016, End date: Jun 30, 2018,

The main objective of the COFRARE 2.0 project, answering to the call for proposal launched in WP B-4.3, will be to carry out process development for composite frames manufacturing with high production rate and low cost to provide a step forward in the development of aerostructures composite component for aircrafts such as Regional ones.The project will contribute to the development and validation ...
Read Project

 3

 FINISHED 

Open social transport network for urban approach to carpooling (SocialCar)

Start date: Jun 1, 2015, End date: May 31, 2018,

SocialCar is an Intelligent Transport System based on an innovative approach to transport demand management, and more specifically to carpooling in urban and peri-urban areas. SocialCar’s main objective is devopping a new communication network for intelligent mobility, sharing information of car-pooling integrated with existing transport and mobility systems. It will be achieved by means of powerf ...
Read Project

 28

 FINISHED 

Advertisement displays manufactured by hybrid in-mould integration (Optintegral)

Start date: Feb 1, 2015, End date: Jan 31, 2018,

OptIntegral develops and demonstrates LED displays for advertisement manufactured by in-mould hybrid integration of TOLAE electronics and photonics components.The aim is to proof the flexibility and sustainability of the novel manufacturing process enabling a diversity of LED display products competitive with EU-labour cost.Three different large area displays: 3D glasses free, lightpipe and backli ...
Read Project

 11

 FINISHED 

Do Cardiac Health: Advanced New Generation Ecosystem (Do CHANGE)

Start date: Feb 1, 2015, End date: Jan 31, 2018,

The primary objective of Do CHANGE is to develop a health ecosystem for integrated disease management of citizens with high blood pressure and patients with ischemic heart disease or heart failure. The system will give them access to a set of personalized health services in a near real-time fashion. This disruptive system will incorporate behavior change methods, such as “Do Something Different”, ...
Read Project

 12

 FINISHED 

PREdictiVe system to recommend Injection mold sEtup in Wireless sensor networks (PREVIEW)

Start date: Jan 1, 2015, End date: Dec 31, 2017,

The objective of PREVIEW is to develop a Cyber Physical System (CPS) for plastic injection manufacturing processes monitoring, control and optimization, by incorporating several innovative and cutting edge technological solutions: advanced artificial intelligence and machine learning techniques, robust industrial wireless communication, IoT and indoor location. PREVIEW is a middleware solution tha ...
Read Project

 8

 FINISHED 

Towards transparencY and Privacy in the onlinE advertising businesS (TYPES)

Start date: May 1, 2015, End date: Oct 31, 2017,

Online advertising generated in 2013 $42B worth of revenue and more than 3.4 million direct and indirect jobs in Europe in 2012 alone. It supports some of the most important Internet services such as search, social media and user generated content sites. However, the lack of transparency regarding tracking techniques and the type of information companies collect about users is creating increasing ...
Read Project

 10

 FINISHED 

REtrofitting Solutions and Services for the enhancement of Energy Efficiency in Public Edification (RESSEEPE)

Start date: Jul 1, 2013, End date: Jun 30, 2017,

RESEEPE will bring together design and decision making tools, innovative building fabric manufacturers and a strong demonstration programme to demonstrate the improved building performance through retrofitting. The core idea of the RESSEEPE project is to technically advance, adapt, demonstrate and assess a number of innovative retrofit technologies. Reductions in the area of 50% will be achieved i ...
Read Project

 27

 FINISHED 

Personalised Guidance Services for Optimising lifestyle in teen-agers through awareness, motivation and engagement (PEGASO)

Start date: Dec 1, 2013, End date: May 31, 2017,

Obesity and other lifestyle-related illness are among the top healthcare challenges in Europe. Obesity alone accounts for up to 7% of healthcare costs in the EU, as well as wider economy costs associated with lower productivity, lost output and premature death. Obesity in younger age is an alarming predictor for obesity in adulthood, but also entails short term health complications in juvenile age ...
Read Project

 23

 FINISHED 

Social sensors for secUrity Assessments and Proactive EmeRgencies management (SUPER)

Start date: Apr 1, 2014, End date: Mar 31, 2017,

"Social media (SM) statistics during recent disasters (e.g., the 20 million tweets relating to «Sandy» storm and the sharing of related photos in Instagram at a rate of 10/sec) provide tangible evidence that security forces and civil protection agencies could greatly benefit from the effective blending of SM information into their processes. However, despite the widespread use of SM in various dom ...
Read Project

 11

 FINISHED 

Water Innovation through Dissemination Exploitation of Smart Technologies (WIDEST)

Start date: Feb 1, 2015, End date: Jan 31, 2017,

The role of ICT in contributing to the “Smart Technologies EIP Priority” is widely recognised by the scientific community and water business professionals. Despite relevant progress and innovation achieved in this field, several barriers hinder the implementation of Smart Water Technologies such as the fragmentation of the sector, slow adoption, absence of SME development, and no holistic vision o ...
Read Project

 6

 FINISHED 

Bioactive Implantable Polymers based on UreidoPyrimidinone (BIP-UPy)

Start date: Feb 1, 2013, End date: Jan 31, 2017,

BIP-UPy addresses the need for biomedical implants which can be easily fine-tuned in their properties in regards to bioactivity, biodegradability, and mechanical performance, and thereby be optimized for their targeted clinical application.This project will develop a library comprising of a selection of synthetic polymers and specific bioactivities which can be used to provide the required propert ...
Read Project

 11

 FINISHED 

Jigs and Fixtures for Assembly of the Laminar Wing at the BLADE flight test demonstrator Final Assembly Line (JIF2LAND)

Start date: Sep 1, 2014, End date: Dec 31, 2016,

The objective of JIF2LAND proposal it to conduct the evelopment, design, manufacture and installation of jig platforms, staging and operational tooling for removing the BLADE wing (Natural Laminar Flow) sections of an A340-300, after the flight test and to assembly the original wings tips of the aircraft. The SFWA flight test demonstrator aims to validate that a specific wing profile can sustain l ...
Read Project

 3

 FINISHED 

Private Identity as a Service (PIDaaS)

Start date: Jul 1, 2014, End date: Dec 31, 2016,

Methods of identification and authentication are used to confirm the Identity of a person in order to protect physical and digital information. Biometrics identifiers (distinctive and measureable characteristics to describe individuals) have been widely used in different authentication systems, however the wider adoption of biometrics in mobile services for enhancing the identification and authent ...
Read Project

 8

 FINISHED 

ROTATING COWLS (LIGHT-COWLS)

Start date: Mar 25, 2013, End date: Nov 24, 2016,

The Project LIGHT-COWLS is aimed to find out a way to produce rotating nacelle components for aircraft engines by using composites materials with high Tg, production method can be RTM or ATL. In particular the design and manufacturing of rotating nacelle of the CROR is targeted. The materials to be used for this development will be high Tg resins and fibers as reinforcement. Thus the project will ...
Read Project

 4

 FINISHED 

Rotating nozzle (R-NOZZLE)

Start date: Feb 15, 2013, End date: Nov 14, 2016,

The Project R-NOZZLE is aimed to find out a way to produce 360º components for aircraft engines by combination of near-net-shape rolled ring process, plus machining. In particular the design and manufacturing of rotating exhaust nozzle of the CROR is targeted. The materials to be used for this development will be Inconel718 and Titanium Alloy. Thus the project will look for a cost effective way of ...
Read Project

 2

 FINISHED 

Robust, and FLEXible CAST iron manufacturing (FLEXICAST)

Start date: Nov 1, 2012, End date: Oct 31, 2016,

The FLEXICAST project presents knowledge-based technologies that aim to follow the way to transform the conventional (batch-by-batch) foundry process into a flexible (mold-by-mold) process. The proposal technologies will be applicable not only to new cast iron foundry lines, but also is readily available to be retro-fitted to existing plants. The specific objectives are:a)A cast iron production ce ...
Read Project

 16

 FINISHED 

MATerials for FLEXible ENergy harvesting Devices (Matflexend)

Start date: Oct 1, 2013, End date: Sep 30, 2016,

MATFLEXEND investigates new materials which enable capacitive-mechanical energy harvesters with significantly improved power density and efficiency. Such materials will be durable, solution-processible, flexible, and therefore enable mass-production techniques including printing.The “REWOD” principle (Reverse-Electrowetting-On-Dielectric) will be developed for small-scale energy scavenging, and a ...
Read Project

 11

 FINISHED 

Contra-Rotating Open Rotor (CROR) Propeller barrels (GREENBARRELS)

Start date: Mar 1, 2012, End date: Sep 30, 2016,

The Project GREENBARRELS is aimed to find out a way to produce 360º components for aircraft engines by spinning methods, such as: spinning lathe, flowforming, shearforming. In particular the manufacturing of barrels for CROR propellers of SAGE2 ITD will be assessed. The materials to be used for this development will be Inconel718 and Titanium Alloy. Thus the project will look for a cost effective ...
Read Project

 4

 FINISHED 

Implementation carbon fibres for rotor of high speed rotating electric machine (HIGHPSLEEVE)

Start date: Jun 1, 2014, End date: Sep 30, 2016,

The Project HIGHPSLEEVE is aimed to find out a way to produce a fixation component for electrical motor, which turns at 50.000 RPM and works in -50 to 250ºC, of an aircraft by using composites materials with high Tg, such as BMI or Cyanate ester, reinforced with carbon fibers. Production method needs to be researched but Filament Winding seems to be the right candidate process. In particular the d ...
Read Project

 4