Search for European Projects

33 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Innovative multi-functional Vacuum-Insulation-Panels (VIPs) for use in the building sector (INNOVIP)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

INNOVIP Consortium will reinvent the top-of-the-line insulating material vacuum-insulation-panels (VIP) by improving their thermal performance over the entire lifetime by at least 25 % and making VIPs adjustable, mountable and machineable. By reducing the density of the core material and/or using an alternative core material together with less expensive VIP-envelopes as gas barrier, it will be po ...
Read Project

 13

 FINISHED 

Development of novel, high Performance hybrid TWV/GPF Automotive afteR treatment systems by raTIonAL design: substitution of PGMs and Rare earth materials (PARTIAL-PGMs)

Start date: Apr 1, 2016, End date: Sep 30, 2019,

To date, three way catalytic converters (TWCs) have been established as the most effective engine exhaust after-treatment system. However, TWCs not only fail to address the issue of particulate matter (PM) emissions but are also the main industrial consumer of Critical Raw Materials (CRMs) mainly Platinum Group Metals (PGMs) and Rare Earth elements (REEs), with the automotive industry accounting f ...
Read Project

 14

 FINISHED 

Demonstration of the recovery of critical metals such as indium and yttrium by recycling discarded flat panels (LIFE RECUMETAL)

Start date: Sep 1, 2015, End date: Feb 28, 2019,

Background The amount of Waste Electrical and Electronic Equipment (WEEE) generated in Europe is about 13 million tonnes per year (13% of municipal waste). Studies predict this amount will increase by around 3-5% annually over the next decade. For example, approximately 150 000 tonnes of flat screens are collected annually in Europe, of which 120 000 are ...
Read Project

 3

 FINISHED 

New demonstrative pilot plant for the recycling of NdFeB magnets from discarded HDDs (LIFE RECYMAGNET)

Start date: Sep 1, 2014, End date: Feb 28, 2018,

Background Currently most of waste electrical and electronic equipment (WEEE) is incinerated or sent to landfill. This waste stream needs to be correctly managed to prevent the release of the many toxic compounds in WEEE into the environment. Spain produces about 200 000 tonnes of WEEE per year. This waste is also rich in scarce natural elements for which ...
Read Project

 4

 FINISHED 

Ecosystem infrastructure for smart and personalised inclusion and PROSPERITY for ALL stakeholders (Prosperity4All)

Start date: Feb 1, 2014, End date: Jan 31, 2018,

Over 2 billion people worldwide have different types, degrees, or combinations of disability, literacy, digital literacy or aging related barriers that impede or prevent use of ICT. Not long ago you could live without access to ICT quite well. However today access to ICT is required for most education, employment, and commerce, and is increasingly required for travel, health, safety, daily living ...
Read Project

 25

 FINISHED 

Indium-Free Transparent Conductive Oxides for Glass and Plastic Substrates (INFINITY)

Start date: Dec 1, 2014, End date: Jan 31, 2018,

INFINITY will develop an inorganic alternative to a scarce and high cost material, indium tin oxide (ITO), currently used as a Transparent Conductive Coating (TCC) for display electrodes on glass and plastic substrates. The novel conductive materials to be developed in this project will be based on low cost sol-gel chemistry using more widely available metallic elements and will leverage recent ad ...
Read Project

 9

 FINISHED 

Westum Educational Develop through InterNational Exchange

Start date: Jun 1, 2015, End date: May 31, 2017,

Westum is a non-profit association concisit of 35 learning centers / adult education centers in collaboration in the west part of Sweden (Region Halland and Västra Götalands regionen). In this Erasmus + KA1 Mobility project We are thirteen municipality adult education centers that has chosen to participate. We will work in a consotium. Participants in the consortium are municipality Essunga, Färg ...
Read Project

 9

 FINISHED 

New demonstrative pilot plant for the purification waste water with oils, fats and hydrocarbons (LIFE-PURIWAT)

Start date: Sep 1, 2013, End date: Feb 28, 2017,

Background Oil, fats or hydrocarbons commonly comprise around 2% of wastewater content. These organic compounds can present a challenge for traditional wastewater treatment systems due to the toxicity of the sludge by-products that remain after treatments. In Spain, according to data from the national registry of sludges, around 1.2 million tonnes (dry ma ...
Read Project

 4

 FINISHED 

Self-repairable Zinc-free Weldable Anti-corrosion Primer for the Steel protection (WELDAPRIME)

Start date: Feb 1, 2014, End date: Jan 31, 2017,

The global production of steel is in the range of 1400M tons, worth nearly €1trillion. The steel demand in Europe in 2011 was estimated to be 145M tons, of which 39M tons p.a. for the construction sector and 16M tons p.a. for structural steel. Most of this steel is carbon or mild steel (as opposed to stainless steel) which corrodes at a high rate and although there are a significant number of anti ...
Read Project

 10

 FINISHED 

Development of recovery processes for recycling of valuable components from FPDs (In, Y, Nd) for the production of high added value NPs (RECYVAL-NANO)

Start date: Dec 1, 2012, End date: Nov 30, 2016,

Waste Electrical and Electronic Equipment is considered to increase drastically in the coming decades. WEEE contains considerable quantities of valuable components used in high-tech applications that currently are not recycled. Europe needs to improve and develop Recovery, Recycling and Reuse of critical materials in order to avoid the dependency on imports, high prices and risk of supply imposed ...
Read Project

 12

 FINISHED 

SELF-HEALING POLYMERS FOR CONCEPTS ON SELF-REPAIRED AERONAUTICAL COMPOSITES (HIPOCRATES)

Start date: Nov 1, 2013, End date: Oct 31, 2016,

A composite aero-structure with self-repair capabilities will offer durability, extend its service life and prolong maintenance protocols leading to lower aircraft operational costs. Despite the extensive research activities in the area of self-healing resins applied to composite materials, the research for aeronautical applications is currently very limited. To this end, the main objective of HIP ...
Read Project

 11

 FINISHED 

Ecological application of nanosorbents on the base of natural and synthetic ionites and carbons (ECONANOSORB)

Start date: May 1, 2012, End date: Apr 30, 2016,

"The proposed research project brings together European universities and research centres from Spain, Italy and Germany and three participant institutions from Russian Federation and Ukraine. It builds on existing international projects under the Seventh Framework programme and will enhance the already active collaboration in the field of environmental protection. The main aim of the proposal is t ...
Read Project

 4

 FINISHED 

Demonstration of soil remediation technique for in situ cleaning of soils contaminated with heavy hydrocarbon mixtures (SORBENT-DEMO)

Start date: Apr 1, 2014, End date: Mar 31, 2016,

There is an increasing understanding that the natural resources should be kept unspoiled, which makes polluted soil and groundwater unacceptable. Therefore, soil contamination is an increasing worldwide problem, which poses severe threats to ecosystem and human health. Through the EU, thousands of sites have been contaminated by previous industrial use, former military sites and other sources of p ...
Read Project

 5

 FINISHED 

Standardised metrology of Nano-sTrUctuRed CoAtings with Low surface energy (NATURAL)

Start date: Mar 1, 2013, End date: Feb 29, 2016,

There is a growing range of applications that would benefit from the use of nanostructured coatings. The functional performance of a surface is intimately linked with its structure. The ability to characterise nanostructured coatings is therefore an essential part of their future uptake. However, the ability to examine and characterise at the nano-scale is currently limited to sophisticated, time- ...
Read Project

 11

 FINISHED 

Development of NEXT GENeration cost efficient automotive CATalysts (NEXT-GEN-CAT)

Start date: Feb 1, 2012, End date: Jan 31, 2016,

The main objective of NEXTGENCAT proposal is the development of novel eco-friendly nano-structured automotive catalysts utilizing transition metal nanoparticles (Cu, Ni, Co Zn, Fe etc) that can partially or completely replace the PGMs. Based on nanotechnology, low cost nanoparticles will be incorporated into different substrates, including advanced ceramics (SiO2, perovskite etc) and silicon carbi ...
Read Project

 11

 FINISHED 

Flame-retardant coatings based on nano-magnesium hydroxide, huntite and hydromagnesite for wood applications (WOOD-FLARETCOAT)

Start date: Jan 1, 2014, End date: Dec 31, 2015,

The concept of the present project WOOD-FLARETCOAT is to solve the problem of producing improved flame retardant coatings for wood products, through the development of non-halogenated flame retardant systems based on inorganic flame retardant nanofillers (nano magnesium hydroxide, huntite and hydromagnesite) functionalised with ROs and incorporated into several water born polymeric matrix, to cons ...
Read Project

 11

 FINISHED 

Novel Mineral Material for road marking (ROADMARK)

Start date: Nov 1, 2013, End date: Oct 31, 2015,

Road accidents imply dramatic personal and social consequences. In 2011 it is estimated more than 30,000 people died on the roads of the European Union, and for every death on Europe's roads there are an estimated 4 permanently disabling injuries such as damage to the brain or spinal cord, 8 serious injuries and 50 minor injuries. These figures also bring about huge economic cost estimated on abou ...
Read Project

 9

 FINISHED 

Fully artificial photo-electrochemical device for low temperature hydrogen production (ArtipHyction)

Start date: May 1, 2012, End date: Oct 31, 2015,

Leaves can split water into O2 and H2 at ambient conditions exploiting sun light. James Barber, one of the key players of ArtipHyction, elucidated Photosystem II (PSII), the enzyme that governs this process. In photosynthesis, H2 is used to reduce CO2 and give rise to the various organic compounds needed by the organisms or even oily compounds which can be used as fuels. However, a specific enzyme ...
Read Project

 8

 FINISHED 

STable high-capacity lithium-Air Batteries with Long cycle life for Electric cars (STABLE)

Start date: Sep 1, 2012, End date: Aug 31, 2015,

Electric car is considered as the most promising technical solution for automotive industries in 21st century since the use of electric energy not only slows down the petrol consumption but also contribute to reduce the CO2 emission and toxic air pollutants.Due to its good performance, Li-ion battery is generally studied to meet the above demands. However, it is still not satisfactory for long dis ...
Read Project

 8

 FINISHED 

MANUFACTURING AND APPLICATIONS OF NANOSTRUCTURED MATERIALS (MANANO)

Start date: Apr 1, 2011, End date: Mar 31, 2015,

"Nanotechnologies and nanostructured materials is expected to be the most promising area of technological development and among the most likely to deliver substantial economic and societal benefits to the EU in the 21st century. It is a time of rapid advance in the development of these technologies, which can organize materials at the nanoscale and tailor their properties. This offers exciting pos ...
Read Project

 7

 FINISHED 

-RESATER (e-RESATER)

Start date: Oct 31, 2012, End date: Dec 30, 2014,

e-RESATER s'inscrit clairement dans la continuité du projet SUDOE RESATER (approuvé dans le cadre du premier appel à projets), qui a permis entre 2009 et 2012 de développer des réseaux locaux d'acteurs de la santé dans 6 territoires de l'espace SUDOE. Le premier projet a permis de mutualiser les expérimentations en e-Santé au sein d'une plateforme transnationale dédiée, contenant des outils d'écha ...
Read Project

 7

 FINISHED 

Development of a new cost-efficient and not-fuel fossil dependent insulating foam material which meet the strict EU requirements regarding thermal and noise efficiency in building and ship constructio (AT-INSULATE)

Start date: Nov 1, 2012, End date: Oct 31, 2014,

AT-INSULATE is a project proposed by several European SMEs to contribute with a novel material that will to fulfil the thermal and acoustic requirements by the increasingly demanding national and international regulations on buildings, insuring better energy efficiency and indoor-quality environment. In addition, AT-INSULATE will be applicable as insulating material to the shipbuilding sector as s ...
Read Project

 9

 FINISHED 

LARGE SCALE PRODUCTION OF TAILORED NANO-OXIDES BY ADVANCED HIGH-OUTPUT, HIGH-VERSATILITY FLAME SPRAY PYROLISIS (ADVANCE-FSP)

Start date: Jan 1, 2010, End date: Dec 31, 2013,

The aim of the project Advance-FSP will be the design and construction of a prototype industrial FSP nanoparticle production line, one order of magnitude higher than whatever is currently available, suitable to achieve at a continuous and trouble-free production level of 5kg/h the same results regarding nature and size (in the range of 10nm) of nanoparticles as obtained in the small FSP laboratory ...
Read Project

 14

 FINISHED 

Development of novel environmentally added-value surfactants and esters by biotechnological processes from fats and oils waste streams (Bio-SURFEST)

Start date: Oct 1, 2011, End date: Sep 30, 2013,

Currently, different origin waste oils have been used mostly as animal feed, raw material for soap makers, and feed stock for fatty acid production. The existent patents and commercial processes to make fatty acids from waste oils always refers to hydrolysis and acidification steps using strong acids such as sulphuric or hydrochloridic acids, producing a mixture of fatty acids, inorganic salts, wa ...
Read Project

 9

 FINISHED 

"Toxicological impact of nanomaterials derived from processing, weathering and recycling of polymer nanocomposites used in various industrial applications" (NANOPOLYTOX)

Start date: May 1, 2010, End date: May 31, 2013,

"The project NANOPOLYTOX will evaluate the toxicological impact of nanomaterials included in polymer nanocomposites, highly used in various industrial sectors, during their life cycle. The toxicological profile will be correlated with the changes in the physical and chemical properties of the nanomaterials during the artificial aging/weathering process of the polymeric nanocomposites. Raw nanomate ...
Read Project

 8

 FINISHED 

Soil remediation technique for in situ cleaning of soils contaminated with heavy hydrocarbons mixtures (SORBENT)

Start date: Sep 1, 2009, End date: Aug 31, 2011,

"The proposed project focuses on heavy and heterogeneous soil formations contaminated with heavy hydrocarbons mixtures and intends to develop and provide to the soil remediation market the cost-effective and highly efficient soil remediation technique applied in-situ to remove historical oil contamination and accidentally or intentionally deposited oil. The proposed technique will be applicable to ...
Read Project

 9

 FINISHED 

TECNOEMPRENDE

Start date: Mar 31, 2005, End date: Jun 29, 2007,

O objetivo geral deste projecto é duplo, por um lado aglutinar e coordenar a informação sobre as diversas iniciativas regionais, de forma a que o empreendedor tecnológico, tenha acessível a informação sobre procedimentos e ajudas para a concretização do seu projecto empresarial; por outro, promover a criação de empresas de base tecnológica no SUDOE, de forma a que se apresente o auto emprego em ár ...
Read Project

 9

 FINISHED 

Transnational network in the SUDOE Space to the identification, valorization and definition of the entrepreneur profile (EMPRENDE+INNOVA)

Start date: Jan 31, 2005, End date: Jun 29, 2007,

El objetivo de este programa de cooperación transnacional entre España, Portugal, Francia (6 regiones) y Reino-Unido (Gibraltar) consiste en aumentar la cohesión económica y social en la Unión Europea y contribuir al desarrollo equilibrado del conjunto del territorio. Con esta finalidad, las autoridades nacionales, regionales y locales tienen la posibilidad de poner en marcha proyectos en distinto ...
Read Project

 6

 FINISHED 

Innovation Agent

Opening new doors for innovative women : Reports on the technology available to SMEs, current implementation levels and the situation of women in SMEs contributed to the creation of the innovation agent professional profile and the training of a group of women to fit this profile. The creation of this profile will help to even out the distribution of men and women in the field of technological inn ...
Read Project

 11

 FINISHED 

Social Agents Promoting Active Aging through ICT

This project is aimed at transferring the developed, tested and successful innovative methodology from the former project “Mayores con Iniciativa”, led by Fundetec at the national level. This methodology is mainly aimed at empowering social agents working with senior citizens to promote the eInclusion of the latter through the ICT-based development of their concrete interests and demands. In other ...
Read Project

 5

 FINISHED 

Promoting Active Learning and Ageing of Disadvantage Seniors

Start date: Nov 1, 2009,

BACKGROUND The Communication “Adult learning. It is never too late to learn” (2006) acknowledges that adult Learning increases social returns in terms of improved civic participation, better health, and greater individual well-being and fulfilment. This statement it’s full supported by academic researches and other studies. In fact education not only "transforms people's lives", but also enables t ...
Read Project

 9

 FINISHED 

Impulso de la Red de Jóvenes Pro Desarrollo

Start date: Oct 1, 2013,

The project “Impulso de la Red de Jóvenes Pro Desarrollo” is a continuation of the project started in 2011, which enabled ten groups of youth, in Latin America and Europe, to actively participate in a debate on intercontinental economic and social development issues of all the involved regions, as well as the role the youth plays as agents of change in their communities. These discussions resulted ...
Read Project

 8

 FINISHED 

Facilitating Opportunities using Role Models to Underpin Learning for Adults who are socially excluded.

Start date: Jan 1, 2013,

The project will develop an adult guidance network based on the principle of adult peer mentoring and fully incorporating the adult learner and former adult learner in “owning” their learning and progression.Successful completion and progression of learners is accompanied not only by good teaching standards but by good guidance. As well as the teacher / learner relationship, the partners have incr ...
Read Project

 5