Search for European Projects

23 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Energy efficient MOF-based Mixed Matrix Membranes for CO2 Capture (M4CO2)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

"The key objective of the M4CO2 project is to develop and prototype Mixed Matrix Membranes based on highly engineered Metal organic frameworks and polymers (M4) that outperform current technology for CO2 Capture (CO2) in pre- and post-combustion, meeting the energy and cost reduction targets of the European SET plan.By applying the innovative concept of M4 by a consortium of world key players, con ...
Read Project

 17

 FINISHED 

Advanced m-CHP fuel CELL system based on a novel bio-ethanol Fluidized bed membrane reformer (FLUIDCELL)

Start date: Apr 1, 2014, End date: Nov 30, 2017,

FLUIDCELL aims the Proof of Concept of an advanced high performance, cost effective bio-ethanol m-CHP FC system for decentralized off-grid, by improving technology developments from previous EU projects. The improvements will be achieved by development of a) better system integration using a fluidized bed catalytic membrane reactor working at low temperature (
Read Project

 9

 FINISHED 

Thermochemical HYDROgen production in a SOLar monolithic reactor: construction and operation of a 750 kWth PLANT (HYDROSOL-PLANT)

Start date: Jan 1, 2014, End date: Sep 30, 2017,

The HYDROSOL-PLANT project is expected to develop, verify and operate all of the tools required to scale up solar H2O splitting to the pilot (750 kWth) scale. The work will be based on the successful HYDROSOL series projects and mainly on the outcome of the current FCH-JU co-funded project, HYDROSOL-3D, dedicated to the provision of all main design specifications of such a pilot plant. HYDROSOL-PL ...
Read Project

 5

 FINISHED 

Joint Operation for Ultra Low Emission Shipping (JOULES)

Start date: Jun 1, 2013, End date: May 31, 2017,

Reducing emissions from shipping has increasingly become a challenge over the last years, both as a counter measure against global climate change and to protect local environments and population from waste, gas emissions and noise.This challenge has been documented both in policy papers, like the Europe 2020 initiative or the Transport White Paper, and in rules and regulations issued by IMO as wel ...
Read Project

 44

 FINISHED 

A Flexible natural gas membrane Reformer for m-CHP applications (FERRET)

Start date: Apr 1, 2014, End date: Mar 31, 2017,

"The potential for fuel CHP units in Europe as a large market in the future is in general well recognised. Although the size of this market is large and is undisputed when the cost targets of m-CHP units is reached, it is often overlooked that it is a very segmented market. All micro-CHP units, as new heating appliances, will have to be certified against the Gas Appliance Directive (90/396/CE). Th ...
Read Project

 6

 FINISHED 

Solar integrated pressurized high temperature electrolysis (SOPHIA)

Start date: Apr 1, 2014, End date: Mar 31, 2017,

Hydrogen and other fuels are expected to play a key role as energy carrier for the transport sector and as energy buffer for the integration of large amounts of renewable energy into the grid. Therefore the development of carbon lean technologies producing hydrogen at reasonable price from renewable or low CO2 emitting sources like nuclear is of utmost importance. It is the case of water electroly ...
Read Project

 10

 FINISHED 

Diagnosis-aided control for SOFC power systems (DIAMOND)

Start date: Apr 1, 2014, End date: Mar 31, 2017,

The DIAMOND project aims at improving the performance of solid oxide fuel cells (SOFCs) for CHP applications by implementing innovative strategies for on-board diagnosis and control. Advanced monitoring models will be developed to integrate diagnosis and control functions with the objective of having meaningful information on the actual state-of-the-health of the entire system. A holistic view ove ...
Read Project

 9

 FINISHED 

ECO-efficient management of WAter in the MAnufacturing industry (ECOWAMA)

Start date: Oct 1, 2012, End date: Sep 30, 2016,

The ECOWAMA Project proposes a new eco-efficient closed cycle management model for the treatment of effluents of the metal and plastic surface processing industry (STM). Such STM waste water is extensively contaminated with oils and greases, organic loading, a salt fraction and especially with heavy metals (e.g. nickel, copper, zinc and others). Hence STM enterprises have high interest on efficien ...
Read Project

 11

 FINISHED 

Development of Auxiliary Power Unit for Recreational yachts (PURE)

Start date: Jan 1, 2013, End date: Jun 30, 2016,

IIn Europe there is a very narrow technology base in portable fuel cell systems which can be applicable for various areas like emergency and remote power, recreational applications, personal portable power and educational devices. The PURE project targets these markets with the primary focus on maritime applications with a device, which will be portable, low weight and volume, based on improved HT ...
Read Project

 5

 FINISHED 

Electrochemical WAter treatment system in the dairy industry with hydroGEN REcovery and electricity production (REWAGEN)

Start date: Jun 1, 2012, End date: May 31, 2016,

The aim of the project is the development of a prototype of a water treatment system -based on the sequential combination of three technologies: electrocoagulation, electrooxidation and a technology for the recovery of generated hydrogen for energy saving and the reutilization of the resulting regenerated water for different applications - more efficient in terms of wastewater treatment and self-s ...
Read Project

 11

 FINISHED 

Industrial scale demonstration of sustainable algae cultures for biofuel production (ALL-GAS)

Start date: May 1, 2011, End date: Apr 30, 2016,

This project will demonstrate on large scale the sustainable production of bio-fuels based on low-cost microalgae cultures. The full chain of processes from algal ponds to biomass separation, processing for oil and other chemicals extraction, and downstream biofuel production, as well as the use in vehicles, will be implemented on a 10 ha site.Depending on the methodology chosen during the researc ...
Read Project

 7

 FINISHED 

UNIQUE gasifier for hydrogen Production (UNIfHY)

Start date: Sep 1, 2012, End date: Mar 31, 2016,

Through development and scale up activities on materials and reactors for the integration of advanced biomass steam gasification and syngas purification processes, UNIfHY aims to prove from a process, pilot and industrial scale point of view continuous pure hydrogen production from biomass, increase well-to-tank efficiency and contribute to a sustainable energy portfolio, exploiting results achiev ...
Read Project

 9

 FINISHED 

Advanced Multi-Fuel Reformer for Fuel Cell CHP Systems (ReforCELL)

Start date: Feb 1, 2012, End date: Dec 31, 2015,

Distributed power generation via Micro Combined Heat and Power (m-CHP) systems, has been proven to overcome disadvantages of centralized plant since it can give savings in terms of Primary Energy consumption and energy costs. The main advantage is that m-CHP systems are able to recover and use the heat that in centralized systems is often lost. Wide exploitation of these systems is still hindered ...
Read Project

 11

 FINISHED 

Microtubular Solid Oxide Fuel Cell Power System developement and integration into a Mini-UAV (SUAV)

Start date: Dec 1, 2011, End date: Nov 30, 2015,

"SUAV aims to design, optimise and build a 100-200W mSOFC stack, and to integrate it into a hybrid power system comprising the mSOFC stack and a battery. Additional components of the system are a fuel processor to generate reformate gas from propane and other electrical, mechanical and control balance of plant (BoP).All these components will be constituents of an entire fuel cell power generator w ...
Read Project

 10

 FINISHED 

New Method for Superior Integrated Hydrogen Generation System 2+ (NEMESIS2+)

Start date: Jan 1, 2012, End date: Jun 30, 2015,

"Decentralized hydrogen production at refuelling stations has great potential to accelerate market introduction of hydrogen-powered vehicles. Based on the outcome of the previous NEMESIS project under FP6 the overall objective of the proposed NEMESIS 2+ project is the development of a small-scale hydrogen generation prototype capable of producing 50 standard cubic metres of hydrogen per hour from ...
Read Project

 7

 FINISHED 

Low temperature hydrogen production from second generation biomass (HyTime)

Start date: Jan 1, 2012, End date: Jun 30, 2015,

The aim of HyTime is to deliver a bioprocess for decentral H2 production from 2nd generation biomass with a productivity of 1-10 kg H2/d. The novel strategy in HyTime is to employ thermophilic bacteria which have shown superior yields in H2 production from biomass in the previous FP6 IP HYVOLUTION.Biomass in HyTime is grass, straw, molasses or unsold organic goods from supermarkets. The biomass is ...
Read Project

 9

 FINISHED 

Design and Manufacturing of Catalytic Membrane Reactors by developing new nano-architectured catalytic and selective membrane materials (DEMCAMER)

Start date: Jul 1, 2011, End date: Jun 30, 2015,

The DEMCAMER project proposes an answer to the paradigm met by the European Chemical Industry: increase the production rate while keeping the same products quality and reducing both production costs and environmental impacts. Through the implementation of a novel process intensification approach consisting on the combination of reaction and separation in a “Catalytic Membrane Reactor” single unit. ...
Read Project

 20

 FINISHED 

Pre-normative research on safe indoor use of fuel cells and hydrogen systems (HyIndoor)

Start date: Jan 2, 2012, End date: Jan 1, 2015,

This project addresses the issue of safe indoor use of hydrogen and fuel cells systems (priority 4.6 of the call FCH-JU-2010-1) for early markets (forklift refuelling and operation, back-up power supply, portable power generation, etc.): It aims to provide scientific and engineering knowledge for the specification of cost-effective means to control hazards specific to the use of hydrogen indoors o ...
Read Project

 10

 FINISHED 

Low Temperature Solid Oxide Fuel Cells for micro-CHP applications (LOTUS)

Start date: Jan 1, 2011, End date: Jun 30, 2014,

Since the requirements of micro-CHP systems in the European Union are becoming clearer, the technologies to reach these goals are emerging steadily. The high intrinsic electrical efficiency and the capability to be directly connected to existing heating circuits, make solid oxide fuel cells a preferred choice for this application. This proposal describes the project to build a prototype of a new g ...
Read Project

 7

 FINISHED 

DEGRADATION SIGNATURES IDENTIFICATION FOR STACK OPERATION DIAGNOSTICS (DESIGN)

Start date: Jan 1, 2011, End date: Jun 30, 2014,

Today, main expectation for SOFC stationary systems competitiveness is to exceed a durability of 40 000 h, an objective which is not today reached except for very specific designs. A better understanding and detection of the failure mechanisms and the internal condition of stacks is of major importance for the introduction of the SOFC technology. If, massive SOFC stack or auxiliary failure can be ...
Read Project

 10

 FINISHED 

Sustainable Hydrogen Evaluation in Logistics (SHEL)

Start date: Jan 1, 2011, End date: Jun 30, 2014,

"Materials handling vehicles are currently powered by either electric motors based on lead-acid batteries or combustion engines employing diesel or liquefied petroleum gas. A number of disadvantages have been encountered with these current power systems and many efforts have been undertaken to find new ways to power the vehicles..Here, fuel cells offer advantages over the competing electrochemical ...
Read Project

 14

 FINISHED 

Advanced Electrolyser for Hydrogen Production with Renewable Energy Sources (ADEL)

Start date: Jan 1, 2011, End date: Dec 31, 2013,

The ADEL project (ADvanced ELectrolyser for Hydrogen Production with Renewable Energy Sources) proposes to develop a new steam electrolyser concept named Intermediate Temperature Steam Electrolysis (ITSE) aiming at optimizing the electrolyser life time by decreasing its operating temperature while maintaining satisfactory performance level and high energy efficiency at the level of the complete sy ...
Read Project

 13

 FINISHED 

Hybrid Membrane - Pressure Swing Adsorption (PSA) Hydrogen Purification Systems (Hy2Seps-2)

Start date: Nov 1, 2011, End date: Oct 31, 2013,

The main goal of the proposed work is the design and testing of hybrid separation schemes that combine membrane and Pressure Swing Adsorption (PSA) technology for the purification of H2 from a reformate stream that also contains CO2, CO, CH4, and N2. The general objectives comply with SP1-JTI-FCH.2010.2.3: “Development of gas purification technologies”, which is part of the application area SP1-JT ...
Read Project

 5