Search for European Projects

9 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Development and demonstration of materials and manufacturing process for ultra high reliability electric Anti-ice/De-ice thermal layers for high strain rotor blades and helicopter airframe sections (NO-ICE-ROTOR)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

The expected outcome of the NO-ICE-ROTOR project is structural and environmental test substantiation of ultra high reliability heater layers which are capable to be integrated into an advanced tilt civil rotorcraft configuration with high cruise speed, low fuel consumption and gas emission, low community noise impact, and high productivity for operators.The realisation of such an advanced tilt civ ...
Read Project

 5

 FINISHED 

Real time monitoring of SEA contaminants by an autonomous Lab-on-a-chip biosensor (SEA-on-a-CHIP)

Start date: Dec 1, 2013, End date: May 31, 2017,

Early warning systems that can provide extreme sensitivity with exquisite selectivity are required to assess chemical contamination of estuarine and coastal areas. SEA-on-a-CHIP aims to develop a miniaturized, autonomous, remote and flexible immuno-sensor platform based on a fully integrated array of micro/nano-electrodes and a microfluidic system in a lab-on-a-chip configuration combined with ele ...
Read Project

 19

 FINISHED 

Adaptable power density coating for energy efficient heating of cockpit and cabin (HELI-COMFORT)

Start date: Nov 1, 2014, End date: Apr 30, 2016,

The objective of HELI-COMFORT is to advance the technology readiness level of an innovative, purpose made, prototypic electrical heating system to a TRL 4 or higher level. After laboratory scale tests on smaller samples and an CFD based numerical simulation of such heating elements in a helicopter interior, this heating system will be integrated in an 1:1 helicopter mock-up and investigated under ...
Read Project

 5

 FINISHED 

Enhanced Power Pilot Line - EPPL (EPPL)

Start date: Apr 1, 2013, End date: Mar 31, 2016,

A sustainable and competitive European power semiconductor industry is essential to support the megatrend developments formulated in the Europe 2020 strategy - climate change, energy security, food security, and health and aging population. In practically all these areas, power semiconductors play a vital role. Thus, it is of paramount importance to defend and further extend Europe’s leading posit ...
Read Project

 33

 FINISHED 

Chromium free surface pre-treatments and sealing of Tartaric Sulphuric Anodizing (ChromFree)

Start date: Mar 1, 2013, End date: Jun 30, 2015,

Corrosion of Al has to be counteracted by first anodizing the Al parts and applying further protective coatings. Anodized aluminium is normally further processed with a sealing as a final step after anodizing. A hot water sealing process is one of the widely used methods. However in order to close (seal) the pores in the aluminium oxide anodized layer for corrosion protection a process involving b ...
Read Project

 2

 FINISHED 

Zinc-Air flow batteries for electrical power distribution networks (POWAIR)

Start date: Nov 22, 2010, End date: Nov 21, 2014,

The concept of the project is to create a new class of electrical energy storage system with the unique combination of characteristics of high energy density, modularity, fast response and low cost. To achieve these aims, the project will radically extend performance of a zinc – air batteries from small scale single primary cells to rechargeable redox flow battery modules, which at production scal ...
Read Project

 8

 FINISHED 

Validate of TSAA coating technology. Development of procedures and standards manual. Technical and economical study (ValidateTSAA)

Start date: May 1, 2013, End date: Jun 30, 2014,

The proposed project will focus on the validation of a TSAA process, including pre- and post-treatment, which is defined by the topic manager, and its implementation in industrial scale. An existing industrial plant, which will be selected by the topic manager, will be benchmarked with respect to the number and dimensioning of the components of the plant and its periphery with respect to the techn ...
Read Project

 2

 FINISHED 

Corrosion protection of Aluminium unpainted parts: development of an appropriated Cr free sealing process on thin SAA layer (≤5 µm) (SAA-Seal)

Start date: May 1, 2012, End date: Apr 30, 2014,

Corrosion of Al has to be counteracted by first anodizing the Al parts and applying further protective coatings. During anodizing, Al reacts with the electrolyte and a layer of aluminium oxide is formed, which is highly porous and is subject to corrosive attack. Therefore, anodized Al is normally further processed with a sealing as a final step. Sealed SAA industrial processes providing thicker la ...
Read Project

 1

 FINISHED 

Chromate free and energy efficient sealing of TSA anodic films for corrosion protection (TARTASEAL)

Start date: Dec 1, 2011, End date: Nov 30, 2012,

"Corrosion of Al has to be counteracted by first anodizing the Al parts and applying further protective coatings. During anodizing, aluminium reacts with the electrolyte and a layer of aluminium oxide is formed on the surface of the aluminium specimen. This coating is highly porous and is subject to attack from the environment and corrosive elements. Therefore, anodized aluminium is normally furth ...
Read Project

 1