Search for European Projects

10 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Air Launch space Transportation using an Automated aircraft and an Innovative Rocket (ALTAIR)

Start date: Dec 1, 2015, End date: Nov 30, 2018,

ALTAIR’s strategic objective is to demonstrate the feasibility of a new cost effective and reliable space launch system for the access to Low-Earth Orbit (400-1000 km) of small satellites ranging from 50 to 150 kg. The ALTAIR launch system aims to be the expected answer to the needs of small satellites users, providing an affordable and adapted access to space service, without the constraints of c ...
Read Project

 8

 FINISHED 

Integrated and portable image cytometer for rapid response to Legionella and Escherichia coli in industrial and environmental waters (CYTO-WATER)

Start date: Jun 1, 2015, End date: May 31, 2018,

The proposed project will deploy for the first time a new imaging cytometer platform capable of detecting minute quantity of micro-organisms in industrial and environmental waters. The platform is based on the integration of proprietary technologies available to the consortium partners: an automatic water concentration cartridge combined with a microfluidic cell will provide an adequate sample to ...
Read Project

 6

 FINISHED 

Innovative sorting process plastIc recycling (INSPIRE4LIFE)

Start date: Jun 2, 2014, End date: May 31, 2017,

Background Industrial plastic waste is a growing waste stream in the EU. This includes plastic pieces coming from end-of-life vehicles (ELVs), waste electrical and electronic equipment (WEEE) and furniture. However, this waste does not yet benefit from a proper recycling chain, largely due to the challenges of automating the sorting process. Imperfect so ...
Read Project

 2

 FINISHED 

European Control System Security Incident Analysis Network (ECOSSIAN)

Start date: Jun 1, 2014, End date: May 31, 2017,

The protection of critical infrastructures increasingly demands solutions which support incident detection and management at the levels of individual CI, across CIs which are depending on each other, and across borders. An approach is required which really integrates functionalities across all these levels. Cooperation of privately operated CIs and public bodies (governments and EU) is difficult b ...
Read Project

 22

 FINISHED 

The lab-free CBRN detection device for the identification of biological pathogens on nucleic acid and immunological level as lab-on-a-chip system applying multisensor technologies (MULTISENSE CHIP)

Start date: Jun 1, 2011, End date: Nov 30, 2015,

The goal of MultiSENSE is the development of a detection and identification system for biological pathogens, which shall include both the sample preparation stage, during which target molecules are extracted directly and in parallel the ensuing nucleic-acid-based and/or immunological detection and identification steps, in order to build an integrated “sample in, result out” system. Disruptive tech ...
Read Project

 9

 FINISHED 

One-shot Manufacturing on large scale of 3D up graded panels and stiffeners for lightweight thermoplastic textile composite structures (MAPICC 3D)

Start date: Dec 1, 2011, End date: Nov 30, 2015,

"The MAPICC 3D project and concept aims at developing manufacturing system for 3D shaped, multilayered products based on flexible materials. The ultimate goals are:> The development of integrated and automated process chain able to produce from hybrid thermoplastic yarn to 3D complex shaped thermoplastic composite structure in single step thermoplastic consolidation process.> The development of fl ...
Read Project

 21

 FINISHED 

Improved First Responder Ensembles Against CBRN Terrorism (IF REACT)

Start date: Jan 1, 2012, End date: Dec 31, 2014,

IF REACT answers to the call SEC‐2011.4.4‐1 CBRN individual Protective Clothing where the task is “to develop innovative protective clothing for first responders and/or for the public in case of a CBRN crisis.”IF REACT takes both the danger of terrorist attacks using CBRN‐means and releases other than attack, such as pandemic outbreaks, accidents and other incidents involving dangerous substances, ...
Read Project

 13

 FINISHED 

New Designs of Ecological Furnaces (EDEFU)

Start date: Jun 1, 2010, End date: May 31, 2014,

The general objective of the EDEFU project consists in developing new technologies of heating, new refractory materials to improve heat insulations and new designs for innovating recovery systems for residues for industrial furnaces in Non ferrous metals, glass, ceramics and cement industries. The evaluation of the success of the project will be realised through the validation of real scale demon ...
Read Project

 20

 FINISHED 

Versatile InfoRmation Toolkit for end-Users oriented Open Sources explOitation (VIRTUOSO)

Start date: May 1, 2010, End date: Jun 30, 2013,

"VIRTUOSO projects aims at providing European Security stakeholders with a toolkit based on an open-source-software framework and a set of advanced information processing tools. This toolkit will allow building end-user oriented applications: - Ranging from open source collection to decision support - Providing at each step actionable, rated, validated information - Integrated in an open framework ...
Read Project

 19

 FINISHED 

MOnitoring Network of ALlergens by Immuno-SAmpling (MONALISA)

Start date: Jan 15, 2005, End date: Apr 15, 2008,

Background According to the European Academy of Allergology and Clinical Immunology (EAACI), allergic disease is the most common chronic disease of childhood in EU countries and seasonal allergic rhinitis caused by pollen affects up to 35% of the entire population. Having an accurate picture of the allergens in the air is of crucial importance. The curren ...
Read Project

 7