Search for European Projects

34 European Projects Found

Searched on 125080 European Projects

 FINISHED 

RADiation and reliability challenges for electronics used in Space, Avionics, on the Ground and at Accelerators (RADSAGA)

Start date: Mar 1, 2017, End date: Feb 28, 2021,

Reliability and radiation damage issues have a long and important history in the domain of satellites and space missions. Qualification standards were established and expertise was built up in space agencies (ESA), supporting institutes and organizations (CNES, DLR, etc.) as well as universities and specialized companies. During recent years, radiation concerns are gaining attention also in aviati ...
Read Project

 9

 FINISHED 

Laser Lightning Rod (LLR)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

Controlling lightning is a long time dream of mankind. The goal of the present project is to investigate and develop a new type of lightning protection based on the use of upward lightning discharges initiated through a high repetition rate multi terawatt laser. The feasibility of the novel technique and the project’s prospect of success are based on recent research providing new insights into the ...
Read Project

 9

 FINISHED 

Multi-scale Composite Material Selection Platform with a Seamless Integration of Material Models and Multidisciplinary Design Framework. (COMPOSELECTOR)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

The mission of COMPOSELECTOR is to develop a Business Decision Support System (BDSS), which integrates materials modelling, business tools and databases into a single workflow to support the complex decision process involved in the selection and design of polymer-matrix composites (PMCs). This will be achieved by means of an open integration platform which enables interoperability and information ...
Read Project

 11

 FINISHED 

Ecological and Multifunctional Composites for Application in Aircraft Interior and Secondary Structures (ECO-COMPASS)

Start date: Apr 1, 2016, End date: Mar 31, 2019,

Composites are important materials used in aircrafts due to their excellent mechanical properties combined with relatively low weight enabling the reduction of fuel consumption. Expensive carbon fibre reinforced plastics (CFRP) are used in fuselage and wing structures and increasingly replace classic metals. Glass fibre reinforced plastics (GFRP) are mainly used for the interior panels. All these ...
Read Project

 9

 FINISHED 

Efficient Composite parts manufacturing (EFFICOMP)

Start date: Apr 1, 2016, End date: Mar 31, 2019,

...tion of composite parts for structural application on aerospace products. These objectives are fully in line with objectives of the call MG1.8. European partners consortium is composed with end user (AIRBUS Group) and research laboratories (DLR, Stuttgart University, Delft University) and a dissemination expert partner (EASN). All selected partners have a strong experience with aerospace research ...
Read Project

 6

 FINISHED 

Efficient Manufacturing for Aerospace Components USing Additive Manufacturing, Net Shape HIP and Investment Casting (EMUSIC)

Start date: Apr 1, 2016, End date: Mar 31, 2019,

This proposal is in response to the call for International Cooperation in Aeronautics with China, MG-1.10-2015 under Horizon 2020 “Enhanced Additive Manufacturing of Metal Components and Resource Efficient Manufacturing Processes for Aerospace Applications”. The objectives are to develop the manufacturing processes identified in the call: (i) Additive manufacturing (AM); (ii) Near Net Shape Hot I ...
Read Project

 12

 FINISHED 

Integrated design and novel tooling and process optimisation of microwave processing of composites (SIMUTOOL)

Start date: Sep 1, 2015, End date: Feb 28, 2019,

SIMUTOOL will develop a simulation platform for the manufacturing of composites through microwave MW heating. The simulation will include the electromagnetic field coupled with heat transfer mechanisms that take place during the production process. It will also include the process control loop which will enable the optimum design of the manufacturing process.One of the major outputs of the simulat ...
Read Project

 9

 FINISHED 

Multi-contact Collaborative Humanoids in Aircraft Manufacturing (COMANOID)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

COMANOID investigates the deployment of robotic solutions in well-identified Airbus airliner assembly operations that are laborious or tedious for human workers and for which access is impossible for wheeled or rail-ported robotic platforms. As a solution to these constraints a humanoid robot is proposed to achieve the described tasks in real-use cases provided by Airbus Group. At a first glance, ...
Read Project

 7

 FINISHED 

Quality assurance concepts for adhesive bonding of aircraft composite structures by advanced NDT (ComBoNDT)

Start date: May 1, 2015, End date: Apr 30, 2018,

The integration of innovative lightweight materials like CFRP into multi-material design (MMD) environments in aeronautic applications brings along a paradigm shift in initial design, manufacturing and in maintenance, repair and overhaul (MRO). Essential cost reductions over the whole aircraft lifecycle demand innovative processes meeting the specific requirements of MMD in general and specificall ...
Read Project

 14

 FINISHED 

Speaker Identification Integrated Project (SIIP)

Start date: May 1, 2014, End date: Apr 30, 2018,

SIIP is a break-through Suspect Identification solution based on a novel Speaker-Identification (SID) engine fusing multiple speech analytic algorithms (e.g. voiceprints recognition, Gender/Age/Language/Accent ID, Keyword/ Taxonomy spotting and Voice cloning detection). This Fused Speaker Identification will result in significantly higher true-positive speaker identification, reduced False-Positiv ...
Read Project

 20

 FINISHED 

THINGS2DO (THINGS2D0)

Start date: Jan 1, 2014, End date: Jan 1, 2018,

Develop the FDSOI ecosystem in Europe, beyond the PLACES2BE Pilot Line, in order to increase the impact of this European technology. At the time of set up of the first KET pilot line the proof of FDSOI was mainly technological. In between then and now, the first realization of a complex silicon chip in FDSOI has shown to the worldwide microelectronics community the capabilities of this technology. ...
Read Project

 44

 FINISHED 

Avionics Systems Hosted on a distributed modular electronics Large scale dEmonstrator for multiple tYpe of aircraft (ASHLEY)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

In search for a more competitive, multiple types of aircrafts, IMA based, avionics platform solution, the European aerospace industry has recently initiated the IMA2G paradigm thanks to the EC funded SCARLETT project.This latter successfully validated a first underlying set of IMA2G concepts (Separate Core Processing resources from I/O resources, introduce resource segments typology of electronics ...
Read Project

 39

 FINISHED 

Global ATM security management (GAMMA)

Start date: Sep 1, 2013, End date: Aug 31, 2017,

The GAMMA project stems from the recognition that while the SESAR initiative is effectively addressing some security issues in the new global ATM scenarios, there is a need to extend this scope to ensure a comprehensive assessment of the full set of security threats and vulnerabilities affecting ATM, considered as a system of systems and covering operational as well as technological aspects. In ad ...
Read Project

 23

 FINISHED 

SUstainable Network for Japan-Europe aerospace research and Technology cooperation II (SUNJET II)

Start date: Dec 1, 2014, End date: Aug 31, 2017,

SUNJET II proposal responds to the H2020-MG-2014 Topic 1.8 International Cooperation in Aeronautics of the work programme. Its main objectives are:• Recommendations and guidance for future EU-Japan cooperation in the field of aviationBuilding on the SUNJET project, SUNJET II will produce consolidated roadmaps in the fields of Aircraft, Systems and Equipment, with the support of R&T institutions, A ...
Read Project

 8

 FINISHED 

Energy Efficient Manufacturing Process of Engineering Materials (EFFIPRO)

Start date: Sep 1, 2013, End date: Dec 31, 2016,

The aim of the project to develop and implement at pilot plant scale a novel field assisted sintering technology. The secuential application of two different technologies will be used: Electrical Discharge Compaction (EDC) and Electrical Resistance Sintering (ERS). The technology will be studied at fundamental level and a pilot plant scale equipment will be designed and built.Higher performances m ...
Read Project

 9

 FINISHED 

More Affordable Aircraft structure through eXtended, Integrated, and Mature nUmerical Sizing (MAAXIMUS)

Start date: Apr 1, 2008, End date: Sep 30, 2016,

Even though composite materials are more and more used in modern airframes, many significant improvements are still achievable. Firstly, the substitution of the assembly of many small composite parts by a single one-shot large part provides additional weight reduction. Secondly, the final assembly line process must be adapted to composite properties (lack of ductility, stiffness). Thirdly, if the ...
Read Project

 60

 FINISHED 

Coordinating research and innovation of jet and other sustainable aviation fuel (CORE-JetFuel)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

For a number of ecologic and economic reasons, the aviation industry is currently in great need for alternative fuels. Highly ambitious goals for the reduction of the sector’s overall greenhouse gas emissions set from industry and politics imply sustainable alternative fuels as major contribution, and require research and innovation efforts in order to develop pathways for an economically feasible ...
Read Project

 7

 FINISHED 

Immersive Semantics-based Virtual Environments for the Design and Validation of Human-centred Aircraft Cockpits (i-VISION)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

New tools are needed for the design and evaluation of aircraft cockpits with a high level of flexibility and low-cost. Virtual prototyping has been widely used. A great challenge today is though to provide methods and tools that seamlessly integrate low-level 3D geometries with domain-specific knowledge and intelligence.i-VISION will combine methods and technologies from 3 distinct areas of resear ...
Read Project

 8

 FINISHED 

CreAting NonconventionAl Laminates (CANAL)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

...s show a promise for improved damage tolerance. A so-called AP-PLY multidirectional weave pattern can improve damage tolerance for any stacking sequence. Whereas for large aircraft manufacturers like Airbus and Boeing it almost seems default to use composites and a high level of automated fabrication with e.g. AFP, it is also lucrative for the small aircraft industry and the transport industry in ...
Read Project

 10

 FINISHED 

Physical processing of molten light alloys under the influence of external fields (EXOMET)

Start date: Jun 1, 2012, End date: Jul 31, 2016,

The ExoMet proposal revolves around innovative liquid metal engineering and the application of external physical fields, in order to significantly influence the microstructures and properties of light alloys, such as aluminium and magnesium. Three types of external fields will be explored, namely: electromagnetic, ultrasonic and intensive mechanical shearing.To meet the future EU challenges of lig ...
Read Project

 30

 FINISHED 

INnovative TEchnologies and Researches for a new Airport Concept towards Turnaround coordinatION (INTERACTION)

Start date: Oct 1, 2013, End date: Jul 31, 2016,

INTERACTION proposes an evolution in airport operations towards a fully integrated and coordinated management of all the processes-passenger, baggage, freight and ramp operations-which are converging into the aircraft turnaround. The main needs are 3: increase time efficiency in each one of the airport processes and the turnaround itself in a coordinated way; reduce the environmental impact of the ...
Read Project

 14

 FINISHED 

ACTUATION 2015: Modular Electro Mechanical Actuators for ACARE 2020 Aircraft and Helicopters (ACTUATION2015)

Start date: Nov 1, 2011, End date: Apr 30, 2016,

The All-Electric Aircraft is a major target for the next generation of aircraft to lower consumption of non-propulsive power and thus fuel burn. To eliminate hydraulic circuits, pumps and reservoirs, Electro Mechanical Actuators (EMA) are mandatory but now need to meet cost, reliability and weight requirements from the airframers.ACTUATION2015 aims to develop and validate a common set of standard ...
Read Project

 56

 FINISHED 

EURO-MILS:\nSecure European Virtualisation for Trustworthy Applications in Critical Domains (EURO-MILS)

Start date: Oct 1, 2012, End date: Mar 31, 2016,

Cyber-physical networks based on embedded systems are part of our society and gain spread and importance. Next generations of aircrafts and cars will be tightly interconnected with each other, with the Internet and other infrastructures. The same holds for many industries and areas of our life. Ubiquitous, highly critical systems go online and create a domain of mixed criticalities, where security ...
Read Project

 15

 FINISHED 

Safe and Autonomous Physical Human-Aware Robot Interaction (SAPHARI)

Start date: Nov 1, 2011, End date: Oct 31, 2015,

Description Recent progress in physical Human-Robot Interaction showed that active and safe workspace sharing becomes possible in principle. SAPHARI will perform a fundamental paradigm shift in robot development in the sense that the human will be the centre of the entire design. The project will enable robots to track, understand and predic ...
Read Project

 14

 FINISHED 

Sustainable Plan for Integrated Development through the European Rail network – Projecting Logistics & mobility for Urban Spatial design evolution (SPIDER PLUS)

Start date: Dec 1, 2012, End date: May 31, 2015,

"SPIDER PLUS objective is to provide a new 2050 mobility VISION through a Strategic Design & Plan, and a Road Map delivering Sustainable Solutions by then. In such Plan the electrified Rail has a central role both for passengers and freight. The productivity of the available resources supported by ICT and other technologies, is maximized by the combination of infrastructural nodes with spatial and ...
Read Project

 14

 FINISHED 

Designing for Adaptability and evolutioN in System of systems Engineering (DANSE)

Start date: Nov 1, 2011, End date: Jan 31, 2015,

Systems of Systems consist of collections of (possibly independent, pre-existing, geographically distributed and following their own goals) constituent systems whose behaviours are coordinated to provide services and additional value with respect to their original intended operations. This kind of entities offer severe technical, management, and political challenges as witnessed by energy blackout ...
Read Project

 11

 FINISHED 

Integrated Magnetic imAgery based on spIntronics Components (IMAGIC)

Start date: Sep 1, 2011, End date: Dec 31, 2014,

Structures reliability, installations safety and products quality are requirements that industrial sectors must take into account. The stake is to guarantee the integrity of the structures. In transport and nuclear fields, a major stake of people safety is associated. To take up this challenge, industries are users of non destructive testing (NDT) which gathers methods providing information on the ...
Read Project

 7

 FINISHED 

Innovative End-to-end Management of Dynamic Manufacturing Networks (IMAGINE)

Start date: Sep 1, 2011, End date: Dec 31, 2014,

Effective end-to-end management of dynamic manufacturing networks is consistently touted as a top priority for manufacturing enterprises that need to strive to improve their efficiency, adaptability and sustainability of their production systems. Moreover, it is a crucial prerequisite for the emerging powerful new model of production based on community, collaboration, and self-organisation and ope ...
Read Project

 15

 FINISHED 

Simulation Platform for Non Destructive Evaluation of Structures and Materials (SIMPOSIUM)

Start date: Sep 1, 2011, End date: Dec 31, 2014,

In all industrial sectors, Non Destructive Evaluation techniques play a critical role for ensuring structures reliability, plant safety and increasingly also for ensuring quality and efficiency of products and processes. The emerging use of numerical simulation is a major trend in the field with tremendous potential benefits in terms of costs reduction, enhanced diagnosis reliability and consequen ...
Read Project

 20

 FINISHED 

Combined Model-based Analysis and Testing of Embedded Systems (MBAT)

Start date: Nov 1, 2011, End date: Dec 31, 2014,

"One of the most important strategic sectors in which Europe is developing, integrating and delivering high-quality products is the transportation domain. Here, high-class safety-related products as e.g. airplanes, cars and trains have a huge market impact. More and more of the market value of these vehicles is gained by embedded systems inside these products, and the number and importance of thes ...
Read Project

 42

 FINISHED 

Multiscale reinforcement of semi-crystalline thermoplastic sheets and honeycombs (M-RECT)

Start date: Apr 15, 2010, End date: Apr 14, 2014,

The M-RECT project aims to create multiscale-reinforced semi-crystalline thermoplastics (PEEK and PPS), which will outperform all reinforced polymers in terms of strength, stiffness, creep and mainly damping by upscaling and further developing state of the art production methods, within cost-efficient manufacturing routes. The envisaged multiscale reinforcement will comprise of dispersed straighte ...
Read Project

 23

 FINISHED 

"SEAMLESS AERONAUTICAL NETWORKING THROUGH INTEGRATION OF DATA LINKS, RADIOS, AND ANTENNAS" (SANDRA)

Start date: Oct 1, 2009, End date: Dec 31, 2013,

"Air traffic in Europe is expected to double by 2025 according to the last forecast of Eurocontrol. Future passenger and freight fleets will bring better efficiency and improved environmental performance, and will allow people to benefit from the connections that only air transport can deliver. In this context, an integrated aircraft communication system is of paramount importance to improve effic ...
Read Project

 34

 FINISHED 

Innovation Management Platform for Aeronautics (Innovation Platform)

Start date: Sep 1, 2010, End date: Jan 31, 2013,

The aim of the proposed project is to develop a software-based innovation management platform founded on structured and precise innovation management processes in order to: generate, assess, define and schedule industrial innovation projects which will lead to step changes in aeronautics. To continuously capture and maintain knowledge output of innovation processes, a regularly accessible database ...
Read Project

 6

 FINISHED 

Alternative Fuels and Biofuels for Aircraft Development (ALFA-BIRD)

Start date: Jul 1, 2008, End date: Jun 30, 2012,

"ALFA-BIRD aims at developing the use of alternative fuels in aeronautics. In a context where the price of oil is increasing and with impact of fossil fuels on climate change, the sustainable growth of the civil aviation is conditioned by the respect of the environment. In this context, using biofuels and alternative fuels in aeronautics is a great challenge, since the operational constraints (e.g ...
Read Project

 24