Search for European Projects

12 European Projects Found

Searched on 125080 European Projects

 FINISHED 

"""2nd Generation Active Wing“ – Active Flow- Loads & Noise control on next generation wing" (AFLONEXT)

Start date: Jun 1, 2013, End date: May 31, 2018,

AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Read Project

 41

 FINISHED 

High Altitude Ice Crystals (HAIC)

Start date: Aug 1, 2012, End date: Jan 31, 2017,

Commercial aircraft have been experiencing in-service events while flying in the vicinity of deep convective clouds since at least the early 1990s. Heated probes and engines are the areas of air-craft most prone to mixed phase and glaciated icing threat. In anticipation of regulation changes regarding mixed phase and glaciated icing conditions, the HAIC project will provide the necessary Acceptabl ...
Read Project

 40

 FINISHED 

Efficient Systems and Propulsion for Small Aircraft (ESPOSA)

Start date: Oct 1, 2011, End date: Jun 30, 2016,

The ESPOSA project will develop and integrate novel design and manufacture technologies for a range of small gas turbine engines up to approx. 1000 kW to provide aircraft manufacturers with better choice of modern propulsion units. It will also deal with engine related systems which contribute to the overall propulsion unit efficiency, safety and pilot workload reduction. Through the newly develop ...
Read Project

 45

 FINISHED 

Composite fuselage section Wafer Design Approach for Safety Increasing in Worst Case Situations and Joints Minimizing (WASIS)

Start date: Jan 1, 2011, End date: Dec 31, 2014,

"Aeronautics is a key asset for the future of Europe, but nowadays the industry has to face the challenge of “More Affordable, Safer, Cleaner and Quieter” while at the same time accounting for a demand that will triple over the next 20 years. WASIS project aims to rise to this challenge with the development of a composite fuselage structure based on the lattice stiffening concept, optimizing geome ...
Read Project

 14

 FINISHED 

All Condition Operations and Innovative Cockpit Infrastructure (ALICIA)

Start date: Sep 1, 2009, End date: Aug 31, 2014,

"ALICIA addresses the ACARE objective of increasing time efficiency within the future air transport system. The aim will be to develop a new and scalable cockpit application which can extend operations of aircraft in degraded conditions – “All Conditions Operations”. A key objective will be to deliver an extensible application that can be applied to many aircraft types. This will necessarily enta ...
Read Project

 42

 FINISHED 

"Design, Simulation and Flight Reynolds Number Testing for Advanced High-Lift Solutions" (DESIREH)

Start date: Mar 1, 2009, End date: Jun 30, 2013,

"DeSiReH focus on both, the numerical design tools and the experimental measurement techniques for cryogenic conditions, with the objective to improve the industrial design process for laminar wings in terms of product quality, efficiency, and development cost reduction. The work focuses on the design of high lift devices. DeSiReH addresses the following quantified objectives which will make a sig ...
Read Project

 21

 FINISHED 

Smart High Lift Devices for Next Generation Wings (SADE)

Start date: May 1, 2008, End date: Oct 31, 2012,

"All aerodynamic concepts for significant reduction of drag such as laminarisation require slim high-aspect-ratio wings. However, state-of-the-art high lift systems will suffer from the reduced construction space and do not cope with the required surface quality. Thus, SADE (Smart High Lift Devices for Next Generation Wings) develops suitable 'morphing' high lift devices: The seamless 'smart leadi ...
Read Project

 13

 FINISHED 

Collaborative & Robust Engineering using Simulation Capability Enabling Next Design Optimisation (CRESCENDO)

Start date: May 1, 2009, End date: Oct 31, 2012,

"The IMG4 project CRESCENDO addresses the Vision 2020 objectives for the aeronautical industry by contributing significantly to the fulfilment of three specific targets of the aeronautical industry’s Strategic Research Agenda. CRESCENDO will develop the foundations for the Behavioural Digital Aircraft (BDA), taking experience and results from VIVACE, and integrating these into a federative system ...
Read Project

 59

 FINISHED 

Conditions of success for R&T Open options through a Platform of communications and for Expressing Recommendation Actions to Team-up Europe and U.S (COOPERATEUS)

Start date: Aug 15, 2010, End date: Oct 14, 2012,

"COOPERATEUS is a European Project within the Framework Programme 7 (Research / Aeronautics and Air Transport) aiming at establishing an initial framework, data base and network, in order to facilitate and enhance the cooperation in R&T activities between the two largest world players in aeronautics, i.e. the USA and Europe. It will introduce a more structured dialogue to identify the similarities ...
Read Project

 11

 FINISHED 

Small Aircraft Future Avionics Architecture (SAFAR)

Start date: Apr 1, 2008, End date: Jul 31, 2012,

"SAFAR will focus on the development of a future avionics architecture for small aircraft providing easy and safe control of the aircraft. SAFAR aims at a significant reduction of pilot workload and an increase of safety during all phases of flight and ground operations incl. take-off and landing. In order to achieve this, SAFAR will provide the aircraft with easy handling characteristics and flig ...
Read Project

 9

 FINISHED 

Green Advanced Space Propulsion (GRASP)

Start date: Dec 1, 2008, End date: Nov 30, 2011,

"Space activities and applications play an important role in strengthening the competitiveness of Europe by scientific progress in the knowledge-based society, and by providing strategic influence and security. Major successful space missions under European leadership have placed ESA and its Member States, the European science community at the forefront. To continue this path Europe must have inde ...
Read Project

 14

 FINISHED 

COMPARATIVE ASSESSMENT OF SECURITY-CENTERED TRAINING CURRICULA FOR FIRST RESPONDERS ON DISASTER MANAGEMENT IN THE EU (CAST)

Start date: Jul 1, 2009, End date: Jun 30, 2011,

"Security-centered training course curricula on disaster management for first responders (FR)* in EU member states will be comparatively assessed with a specially developed matrix-based software: (1) for all EU member states (2) as derived from international best practices in the US, Russia, and Israel as countries with extensive experience in this field. The comparative assessment will cover: (a ...
Read Project

 15