Search for European Projects

18 European Projects Found

Searched on 125080 European Projects

 FINISHED 
Embedded systems are the key innovation driver to improve almost all mechatronic products with cheaper and even new functionalities. Furthermore, they strongly support today's information society as inter-system communication enabler.Consequently boundaries of application domains are alleviated and ad-hoc connections and interoperability play an increasing role. At the same time, multi-core and ma ...
Read Project

 101

 FINISHED 
CORSAIR project is a wide investigation concerning the capabilities of Cold Spray Technology for maintenance and repair of aeronautic frames and components. Today, deep and systematic investigation in Cold Spray is required to better understand the capabilities and fully validate the technology in aeronautics. In this scenario, the activities planned in CORSAIR project are (1) Explore the real cap ...
Read Project

 13

 FINISHED 

Next generation heat pump for retrofitting buildings (GREENHP)

Start date: Dec 1, 2012, End date: Aug 31, 2016,

The building sector is one of the key consumers of energy in Europe today with an overall rising trend over the past 20 years. In order to achieve the current EU 20-20-20 goals or the targets set in the EU Energy Roadmap 2050, it is essential to renovate and retrofit these buildings and to replace inefficient heating systems based on fossil fuels or direct electric heating. The proposed heat pump ...
Read Project

 11

 FINISHED 

Advanced Cockpit for Reduction Of StreSs and workload (ACROSS)

Start date: Jan 1, 2013, End date: Jun 30, 2016,

Outstanding safety level of air transport is partly due to the two pilots standard. However situations where difficult flight conditions, system failures or cockpit crew incapacitation lead to peak workload conditions.The amount of information and actions to process may then exceed the crew capacity. Systems alleviating crew workload would improve safety.ACROSS Advanced Cockpit for Reduction of St ...
Read Project

 36

 FINISHED 

Renewal, Innovation and Change: Heritage and European Society (RICHES)

Start date: Dec 1, 2013, End date: May 31, 2016,

For many in 21st century Europe, Cultural Heritage (CH) is more about what it is than who we are: though enormously rich, this treasure is often locked away, or crumbling, or in a foreign language, or about a past which to many people - young , old, newcomers to Europe and settled inhabitants - seems of little relevance. But this is changing. As digital technologies permeate all of society, compe ...
Read Project

 10

 FINISHED 

Microwave, Ultrasonic and Plasma assisted Syntheses (MAPSYN)

Start date: Dec 1, 2012, End date: May 31, 2016,

The proposed project, MAPSYN, aims to bring selected innovative energy efficient chemical reaction processes, assisted with novel microwave, ultrasonic and plasma systems, up to the manufacturing scale. A pragmatic approach of using these selected alternative energy sources for end user selected reactions, will be individually studied for both microreactor and flow reactor systems (i.e. continuous ...
Read Project

 15

 FINISHED 
The All-Electric Aircraft is a major target for the next generation of aircraft to lower consumption of non-propulsive power and thus fuel burn. To eliminate hydraulic circuits, pumps and reservoirs, Electro Mechanical Actuators (EMA) are mandatory but now need to meet cost, reliability and weight requirements from the airframers.ACTUATION2015 aims to develop and validate a common set of standard ...
Read Project

 56

 FINISHED 

Biomarker for Cardiovascular Risk Assessment in Europe (BiomarCaRE)

Start date: Oct 1, 2011, End date: Mar 31, 2016,

Biomarkers are considered as tools to enhance cardiovascular risk estimation. However, the value of biomarkers on risk estimation beyond European risk scores, their comparative impact among different European regions and their role in the drive towards personalised medicine remains uncertain.Based on harmonised and standardised European population cohorts we have built significant research collabo ...
Read Project

 31

 FINISHED 
ATLLAS II is a logical follow-up of a recently finalized FP6 project which has as objectives the identification and assessment of advanced light-weight and high-temperature resistant materials for high-speed vehicles up to Mach 6.The material requirements are first defined through an in-depth feasibility study of a Mach 5-6 vehicle. The consortium has now this capability at hand as they can rely o ...
Read Project

 16

 FINISHED 
The greater use of polymer matrix composite materials would be highly desirable. Their low weight, along with their inherent resistance to corrosion and fatigue, enables more fuel efficient and sustainable transport structures. However, for many applications, the biggest factor currently preventing the more widespread use of light high-performance polymer matrix composites is their poor fire perfo ...
Read Project

 20

 FINISHED 
Description Presto4U aims to identify useful results of research into digital audiovisual preservation and to raise awareness and improve the adoption  Presto4U is a two-year project supported by a core group of 14 PrestoCentre member organsations. The aim of the project is to identify useful resu ...
Read Project

 15

 FINISHED 
Residential buildings represent 60% of the building stock and the area where most of the potential to drastically reduce energy use and CO2 emissions lies. New directives push for deep retrofitting efforts, in order to achieve energy efficiency and RES adoption targets for 2020 and beyond. These require acting both on envelope and on energy use systems, mainly heating and DHW equipment that repres ...
Read Project

 17

 FINISHED 
MACC II (Monitoring Atmospheric Composition and Climate – Interim Implementation) is designed to meet the requirements that have been expressed for prototype operational GMES services for the atmospheric domain. From late-2011 MACC II will continue the operation and development of the GMES service lines established by the MACC project and prepare for its transition in 2014 to become the atmospheri ...
Read Project

 39

 FINISHED 

Flexible, Fast and Future Production Processes (F³ FACTORY)

Start date: Jun 1, 2009, End date: Jul 31, 2013,

The F3 consortium’s vision is that the EU’s chemical industry’s competitive position would be strongly enhanced if it could operate modular continuous plant (F3 plant) which combines world scale continuous plant efficiency, consistency and scalability with the versatility of batch operation. Our project will deliver such a radically new production mode based on: a) Plug–and–play modular chemical ...
Read Project

 29

 FINISHED 
The project will develop 1) sustainability indicators for buildings, 2) understanding about the needed performance levels considering new and existing buildings, different building types and local requirements, 3) methods for the benchmarking of sustainable buildings (SB) and 4) recommendations for the effective use of benchmarking systems as instruments of steering and in building processes. The ...
Read Project

 13

 FINISHED 
The project MUST will provide new technologies based on active multi-level protective systems for future vehicle materials. “Smart” release nanocontainers will be developed and incorporated in commercial paints, lacquers and adhesive systems to prepare new products exhibiting self-healing properties. A multi-level self-healing approach will combine - in a same system - several damage prevention an ...
Read Project

 19

 FINISHED 
observatoryNANO brings together leading EU organizations who collectively have expertise in the technological; economic; societal/ethical; health, safety, and environmental analysis of nanotechnologies. Its primary aim is to develop appropriate methodologies to link scientific and technological development of nanotechnologies with socio-economic impacts. Both of these aspects will be enhanced by e ...
Read Project

 16

 FINISHED 
"Europe's tooling industry takes up key a position within the production industries of Europe and all other IMS countries as studies have shown. Each production ramp-up depends on the completion of the required tools and their integration into the existing production facilities, the product’s quality is directly linked to the tool’s quality. The tooling industry is facing challenges concerning th ...
Read Project

 10