Search for European Projects

18 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Fast Reactor Experiments for hYbrid Applications (FREYA)

Start date: Mar 1, 2011, End date: Feb 29, 2016,

"Building up on the former activities accomplished in the previous FPs, namely MUSE in FP5 and EUROTRANS in FP6, it is proposed in the FREYA project to extend the investigations of the subcritical configurations for validation of the methodology for on-line reactivity monitoring of ADS systems. The investigations will be related to the different subcriticality levels for the nominal operation mode ...
Read Project

 17

 FINISHED 
While nanotechnology was originally limited to small areas of a few cm2, the quest for lower costs has been the latest years the drive for developing processes utilising larger substrate sizes at increasing throughputs. A typical example is the flat panel display industry where the push to larger gen size and faster processing has resulted in a significant cost reduction. The next challenge here i ...
Read Project

 18

 FINISHED 

SUB nanosecond Leverage In PET/MR ImAging (SUBLIMA)

Start date: Sep 1, 2010, End date: Feb 28, 2015,

...ties of MR. For the first time, time-of-flight (ToF) and depth-of-interaction (DoI) correction will be introduced together into a PET/MR system. SUBLIMA will also be the first to exploit the unique advantages of truly simultaneous PET/MR acquisition by enabling fully 4D MR-derived motion correction. Furthermore, artefacts seen in PET-CT will be eliminated by developing MR-based, motion-compensated ...
Read Project

 14

 FINISHED 
In line with the Sustainable Nuclear Energy Technology Platform (SNETP) Strategic Research Agenda (SRA) and Deployment Strategy (DS), the ARCHER project will extend the state-of-the-art European (V)HTR technology basis with generic technical effort in support of nuclear cogeneration demonstration.The partner consortium consists of representatives of conventional and nuclear industry, utilities, Te ...
Read Project

 34

 FINISHED 

Thermal-hydraulics of Innovative Nuclear Systems (THINS)

Start date: Feb 1, 2010, End date: Jan 31, 2015,

...tific subject in the development of innovative reactor systems. This project is devoted to important crosscutting thermal-hydraulic issues encountered in various innovative nuclear systems, such as advanced reactor core thermal-hydraulics, single phase mixed convection and turbulence, specific multiphase flow, and code coupling and qualification. The main objectives of the project are: • Generatio ...
Read Project

 24

 FINISHED 

ntelligent Modern System Design (I-Mosyde)

Start date: Feb 28, 2014, End date: Nov 29, 2014,

I-Mosyde "Intelligent MOdern SYstem DEsign" in automation is based on embedded system design and (industrial) data communication, and uses advanced diagnostics.Not only industry, but also automation in general services, in health-care (assistive technology for mobility for communication or for living at home independently for elderly people), in building automation, ..., all these "fields" are usi ...
Read Project

 7

 FINISHED 
...ast project aims to reduce time-to-market and to improve productivity of microbial synthetic pathways by identifying key physiological and molecular determinants of performance under industrially relevant conditions and to integrate these at an early stage in strain development programs. The project is characterized by multi-scale analysis and integration of results from industrial-scale into lab- ...
Read Project

 3

 FINISHED 

Evaluation and Viability of Liquid Fuel Fast Reactor System (EVOL)

Start date: Dec 1, 2010, End date: Nov 30, 2013,

...emical toxic element: BeF2, and (4) a fuel reprocessing flux of 4000 liters per day required reaching a high breeding gain. However, this concept is retained by the Generation IV initiative, taking advantages of using a liquid fuel which allows more manageable on-line core control and reprocessing, fuel cycle flexibility (U or Th) and minimization of radiotoxic nuclear wastes. In MSFR, MSR concept ...
Read Project

 13

 FINISHED 
The project addresses from one site the most critical and costly step to produce liquid fuel from natural gas using conventional routes, e.g. the stage of syngas production, and from the other side explores alternative routes to convert natural gas to liquid transportable products. The general objective is to explore novel and innovative (precompetitive) routes for transformation of natural gas t ...
Read Project

 25

 FINISHED 
...training program where the scientific research is integrated with industrial training, supervised by key academic and industrial scientists from all the disciplines needed to deliver industrial relevant science. The UK Centre of Excellence in Biocatalysis (CoEBio3) will manage the project to ensure that the collaboration is integrated seamlessly across both academic and industrial centres, and acr ...
Read Project

 13

 FINISHED 

European Gas Cooled Fast Reactor (GoFastR)

Start date: Mar 1, 2010, End date: Feb 28, 2013,

Fast reactors have the unique ability to be sustainable by, not only being able to generate their own fuel, but through being able to burn minor actinides to reduce the quantity and radiotoxicity of nuclear wastes. The latter ability enables fast reactors to not only burn the minor actinides produced by themselves but, in addition, the minor actinides arising from legacy wastes and thermal reactor ...
Read Project

 22

 FINISHED 
...e lab-scale and pilot-scale reactors. Their properties as block fraction, fine chemical structures, monomer ratio, molecular weight, acetylation degree, and etc. will be studied by chemical and advanced instrumental analysis as UV-visible, FT-IR, MALDI-TOF MS, NMR, MS-GC and etc. A qualitative and quantitative correlation between bacterial alginates’ property alteration and aerobic granular sludge ...
Read Project

 1

 FINISHED 

Quantum Nanoelectromechanical Systems (QNEMS)

Start date: Sep 1, 2009, End date: Aug 31, 2012,

In this project, we will investigate the quantum properties of nanoscale mechanical resonators. Suspended structures will be made of Al, SiN, GaAs, carbon nanotubes, and photonic crystals, covering frequencies in the MHz and GHz range. The vibrations will be excited by electrical means. To overcome the thermal noise, cooling of the low-frequency resonators will be performed. We will use two coolin ...
Read Project

 8

 FINISHED 
Electronically conducting organic materials could potentially revolutionize future opto-electronic technologies, because they are tunable at the molecular level, easily processable, cheap, mechanically flexible, and can form nanoscale structures through bottom-up supramolecular self-assembly. The combination of organic synthesis and supramolecular chemistry can play a crucial role in attaining all ...
Read Project

 1

 FINISHED 

In silico Rational Engineering of Novel Enzymes (IRENE)

Start date: Apr 1, 2009, End date: Mar 31, 2012,

...fficiency; 3) fast substrate-screening and rational substrate engineering; 4) understanding molecular basis of biocatalyst’ action and properties. IRENE will pursue these objectives by taking advantage of computational strategies used in different disciplines and integrate them in an unified concept for studying enzyme catalysis. The four main families of computational methods, Quantum Mechanics, ...
Read Project

 11

 FINISHED 
...lting stakeholders (scientific, institutional, industrial and Civil society organisations) to explore knowledge, attitudes, reactions and proposals in relation to the CoC • assessing the most relevant codes of conducts, voluntary measures and practices for a responsible technology development, regarding in first place N&N R&D, already defined or under study ; • proposing criteria and indicators of ...
Read Project

 10

 FINISHED 

Systems Biology as a Driver for Industrial Biotechnology (SYSINBIO)

Start date: Dec 1, 2008, End date: Nov 30, 2011,

...d science focusing on developing new cell factories or improving existing ones. Metabolic engineering is an enabling science, and distinguishes itself from applied genetic engineering by the use of advanced analytical tools for identification of appropriate targets for genetic modifications and the use of mathematical models to perform in silico design of optimized cell factories. In recent years, ...
Read Project

 21

 FINISHED 
...ry bodies, health insurance and policy making, and experts on the ethical, regulatory, social, economic and public engagement and communication and issues. The goal will be to: - collect the most relevant information to be discussed of: - actual achievements and, separately, promises of nanomedical innovation - recommendations issued by the European Commission, Member States and exercises carried ...
Read Project

 10