Search for European Projects

29 European Projects Found

Searched on 125080 European Projects

 FINISHED 
Road transport is indispensable for the exchange of goods and persons, but at the same time has severe negative consequences, among others related to road safety and environment. In order to meet EU targets, both the number of road crashes and vehicle emission levels need to be reduced substantially. For identifying the next generation of measures that will enable us to actually reach these target ...
Read Project

 21

 FINISHED 
CORSAIR project is a wide investigation concerning the capabilities of Cold Spray Technology for maintenance and repair of aeronautic frames and components. Today, deep and systematic investigation in Cold Spray is required to better understand the capabilities and fully validate the technology in aeronautics. In this scenario, the activities planned in CORSAIR project are (1) Explore the real cap ...
Read Project

 13

 FINISHED 

Applying Pilot Models for Safer Aircraft (A-PiMod)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

The A-PiMod proposal addresses improved flight safety by proposing a new approach to human centred cockpit design, which expands the understanding of the human factor in joint human-machine system, taking into account increasing levels of operational complexity and new operational concepts (SESAR). The project will advance concepts for a fully adaptive and human centered automation, through the in ...
Read Project

 8

 FINISHED 

Cities demonstrating cybernetic mobility (CITYMOBIL2)

Start date: Sep 1, 2012, End date: Aug 31, 2016,

European cities face four main mobility problems: congestion, land use , safety and environment. One of the main causes of such problems is the car-ownership rate. The centres of large cities address this issue combining efficient mass transits with car restriction policies but peripheral areas and smaller cities remain dominated by private cars.CityMobil has demonstrated how automating road vehi ...
Read Project

 49

 FINISHED 

Advanced Cockpit for Reduction Of StreSs and workload (ACROSS)

Start date: Jan 1, 2013, End date: Jun 30, 2016,

Outstanding safety level of air transport is partly due to the two pilots standard. However situations where difficult flight conditions, system failures or cockpit crew incapacitation lead to peak workload conditions.The amount of information and actions to process may then exceed the crew capacity. Systems alleviating crew workload would improve safety.ACROSS Advanced Cockpit for Reduction of St ...
Read Project

 36

 FINISHED 
Modern advanced products of today use embedded computing systems with exacting requirements on execution speed, timeliness, and power consumption. It is a grand challenge to guarantee these requirements across product families and in the face of rapid technological evolution, as current development practices cannot manage performance requirements the same way they manage functional requirements.Ev ...
Read Project

 20

 FINISHED 
"The aim of the project is to design, produce and validate a demonstrator of a Steerable Aircraft Parachute System for rescue of small and medium size airplanes, such as Light Sport Aircrafts (LSA), weighting up to 500 kg, as well as for space capsules, and navigated within the frame of the Global Navigation Satellite System GNSS (e.g. GPS/EGNOS/Galileo).Once the emergency system is activated by t ...
Read Project

 9

 FINISHED 

Metropolis, Urban Airspace Design (METROPOLIS)

Start date: Oct 1, 2013, End date: Apr 30, 2015,

This project proposes the investigation of radically new airspace design concepts for scenarios, which are extreme when compared to today in terms of traffic density, complexity and constraints.Extrapolating the current developments in aerospace technology, it is considered likely that the following two new types of air vehicles will have arrived in the second half of this century:- personal air v ...
Read Project

 4

 FINISHED 

3DTV Content Search (3DTVS)

Start date: Nov 1, 2011, End date: Jan 31, 2015,

Description 3DTVS deals with algorithms and techniques for the analysis, indexing and browsing of 3D television content so that it can be efficiently annotated, stored, searched and retrieved in 3D audiovisual ar 3D video content is already being accumulated in 3D television (3DTV) broadcasters an ...
Read Project

 7

 FINISHED 

Smart Connected Electro Mobility (smartCEM)

Start date: Jan 1, 2012, End date: Dec 31, 2014,

Four European cities/regions (Barcelona, Gipuzkoa-San Sebastian, Newcastle and Reggio Emilia) have come together to demonstrate the role of ICT solutions for cities and citizens in addressing shortcomings of electro mobility. Electric power solutions have proven to offer a potentially ground-breaking solution for more energy-efficient and less petrol-dependent vehicles and transport systems. The ...
Read Project

 31

 FINISHED 

Management of weather events in transport system (MOWE-IT)

Start date: Oct 1, 2012, End date: Sep 30, 2014,

The MOWE-IT project shall assess factors that prerequisite cross-modal transferability between the air and surface-based European transport systems in order to protect the passengers, shippers, European institutions and citizens against travel delays, cancellations and/or stoppages in freight transfer caused by extreme weather and/or other natural disasters. The on-going WEATHER and EWENT- project ...
Read Project

 14

 FINISHED 

All Condition Operations and Innovative Cockpit Infrastructure (ALICIA)

Start date: Sep 1, 2009, End date: Aug 31, 2014,

"ALICIA addresses the ACARE objective of increasing time efficiency within the future air transport system. The aim will be to develop a new and scalable cockpit application which can extend operations of aircraft in degraded conditions – “All Conditions Operations”. A key objective will be to deliver an extensible application that can be applied to many aircraft types. This will necessarily enta ...
Read Project

 42

 FINISHED 

Designing Dynamic Distributed Cooperative Human-Machine Systems (D3CoS)

Start date: Mar 1, 2011, End date: Feb 28, 2014,

Transportation based on cars, aircraft and ships is a key factor for modern human societies. Human operators have historically been in charge of the two main facets of transportation: vehicle control and traffic control. Technological innovations have progressively allowed the introduction of advanced automated assistance systems leading to a complex interplay of humans and automation which has be ...
Read Project

 24

 FINISHED 

The Endless Runway (ENDLESS RUNWAY)

Start date: Jun 1, 2012, End date: Jan 31, 2014,

"The airport’s capacity is determined by the capacity of its runway system. The real capacity is usually lower than the declared capacity because of weather restrictions (cross- and tailwind and visibility) and because of dependencies between runways.Aircraft need to take off and land within defined cross- and tailwind limits. The direction of the runway determines the cross- and tailwind componen ...
Read Project

 5

 FINISHED 
"The objective of HELIOS is to develop a marine low speed two-stroke gas Diesel engine research platform that is realistically sized for direct drive marine propulsion, and that has an emission footprint which compared to present Diesel engine technology is reduced as follows: CO2: 20-30%, NOx: 10-15%, SOx : 90-100%, PM: 60-70%. Since 99% of the world commercial fleet is powered by diesel engines, ...
Read Project

 9

 FINISHED 

interactIVe

Start date: Jan 1, 2010, End date: Nov 30, 2013,

The interactIVe project addresses the development and evaluation of next-generation safety systems for Intelligent Vehicles, based on active intervention. Safety technologies have shown outstanding capabilities for supporting the driver in hazardous situations. Despite their effectiveness, currently available systems are typically implemented as independent functions. This results in multiple expe ...
Read Project

 32

 FINISHED 

Format-Agnostic SCript-based INterAcTive Experience (FascinatE)

Start date: Feb 1, 2010, End date: Jul 31, 2013,

FascinatE will create an innovative end-to-end system and associated standards for future immersive and interactive TV services. It will allow users to navigate around an ultra-high resolution video panorama, showing a live or recorded event, with matching accompanying audio. The output will be adapted to their particular device, covering anything from a mobile handset to an immersive panoramic di ...
Read Project

 11

 FINISHED 

Live Immerse Video-Audio Interactive Multimedia (3D VIVANT)

Start date: Mar 1, 2010, End date: May 31, 2013,

The aim of the project 3D VIVANT is to capture events automatically in 3D and deliver them for realistic, interactive and immersive play back to home users-viewers. This will require the project to create, develop and integrate a comprehensive range of components from the generic technology of 3D imaging. Real and virtual 3D content will be homogeneously combined/mixed producing a novel form of ri ...
Read Project

 9

 FINISHED 

Reduced Certification Costs for Trusted Multi-core Platforms (RECOMP)

Start date: Apr 1, 2010, End date: Mar 31, 2013,

"The proposed RECOMP (Reduced certification cost for trusted multi-core platforms) research project will establish methods, tools and platforms for enabling cost-efficient certification and re-certification of safety-critical systems and mixed-criticality systems, i.e. systems containing safety-critical and non-safety-critical components.RECOMP recognizes the fact that the increasing processing po ...
Read Project

 40

 FINISHED 

Instant Mobility for Passengers and Goods (Instant Mobility)

Start date: Apr 1, 2011, End date: Mar 31, 2013,

The Instant Mobility project has created a concept for a virtual "Transport and Mobility Internet", a platform for information and services able to support radically new types of connected applications for scenarios centred on the stakeholder groups:•\tmultimodal travellers•\tdrivers & passengers•\tpassenger transport operators•\tgoods vehicle operators•\troad operators & traffic managers.The proj ...
Read Project

 24

 FINISHED 
"The PPlane project is a direct follow up study to Out-of-the-Box project that aimed to identify potential new concepts and technologies for future air transport and focused on a number of radical changes to the system rather than taking incremental steps.As a result of the Out-of-the-Box project, PPlane implements a systematic approach to radical and novel ideas for Personal Air Transport System ...
Read Project

 13

 FINISHED 
"The goal of this project is to elaborate an open architecture for the operation of unmanned air-to-ground wide area land and sea border surveillance platforms in Europe. This architecture is based on analysis of concepts and scenarios for UAV-based aerial surveillance of European borders. It takes into account the emerging legislation for insertion of UAS into controlled civil airspace. The techn ...
Read Project

 14

 FINISHED 

Extreme Weather impacts on European Networks of Transport (EWENT)

Start date: Dec 1, 2009, End date: May 31, 2012,

"The project addresses the EU policies and strategies on climate change with particular focus on extreme weather impacts on EU transportation system. The goal of EWENT is to estimate and monetise the disruptive effects of extreme weather events on the operation and performance of the EU transportation system. The methodological approach is based on generic risk management framework that follows a ...
Read Project

 10

 FINISHED 

INtegrated European Signalling System (INESS)

Start date: Oct 1, 2008, End date: Mar 31, 2012,

"Due to the seamless guidance by rails, the railway system requires a dedicated signalling sub-system, whereby a major part of the functionality must be ensured and controlled on the infrastructure side. From a European perspective, the traditional signalling is one of the most conservative parts of the railway system strongly bound to the national traditions by all involved parties.Since 1990 the ...
Read Project

 31

 FINISHED 
The main objective of the ISi-PADAS project is to provide an innovative methodology to support risk based design and approval of Partially Autonomous Driver Assistance Systems (PADAS) focusing on elimination and mitigation of driver errors by an integrated Driver-Vehicle-Environment modelling approach. The methodology contributes to (1) halving the number of road fatalities by 2010 (respect to 200 ...
Read Project

 11

 FINISHED 
"The objective of the HUMAN project is to develop a methodology with techniques and prototypical tools supporting the prediction of human errors in ways that are usable and practical for human-centred design of systems operating in complex cockpit environments. The methodology contributes to (1) reducing the accident rate by enhancing the accuracy of pilot error prediction and to (2) achieving a ...
Read Project

 6

 FINISHED 

Highly Automated Vehicles for Intelligent Transport (HAVE-it)

Start date: Feb 1, 2008, End date: Jul 31, 2011,

Description The groundbreaking HAVEit proposal aims at the long-term vision of highly automated driving. Within this proposal important intermediate steps will be developed, validated and demonstrated. These intermediate results on the one hand offer high potential for exploitation within 3-5 years after HAVEit and on the other hand form the ...
Read Project

 29

 FINISHED 

PRE-DRIVE

Start date: Jul 1, 2008, End date: Sep 30, 2010,

Based on the overall description of a common European architecture for an inter-vehicle and vehicle-to-infrastructure communication system PRE-DRIVE C2X shall develop a detailed system specification and a working as well as functionally verified prototype. It will be robust enough to be used in future field operational trials of cooperative systems. Furthermore PRE-DRIVE C2X shall develop an integ ...
Read Project

 27

 FINISHED 

i-Travel - Service Platform for the Connected Traveller (iTravel)

Start date: Jan 1, 2008, End date: Sep 30, 2009,

“i-Travel” is an original concept that combines three key innovations. The goal of the overall i-Travel IP is to develop, validate and demonstrate an innovative solution for:- (1) a personalised, context-aware online “virtual travel assistant” service for travellers, both before and throughout their journey, based on (2) the integration of e-commerce and internet technologies to create the firs ...
Read Project

 20