Search for European Projects

26 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Targets and biomarkers for antiepileptogenesis (EPITARGET)

Start date: Nov 1, 2013, End date: Oct 31, 2018,

Epilepsy is a devastating condition affecting over 50 million people worldwide. This multidisciplinary project is focused on the process leading to epilepsy, epileptogenesis, in adults. Our main hypothesis is that there are combinations of various causes, acting in parallel and/or in succession, that lead to epileptogenesis and development of seizures. Our central premise and vision is that a comb ...
Read Project

 20

 FINISHED 

Aggression subtyping for improved insight and treatment innovation in psychiatric disorders (AGGRESSOTYPE)

Start date: Nov 1, 2013, End date: Oct 31, 2018,

Aggression is a basic physiological trait with important roles throughout evolution, both in defence and predation. When expressed in humans in the wrong context, aggression leads to maladjustment, social impairment and crime. Despite this, knowledge about aggression aetiology is limited and current treatment strategies are insufficient. Contingent to a subdivision into impulsive and instrumental ...
Read Project

 27

 FINISHED 

"""2nd Generation Active Wing“ – Active Flow- Loads & Noise control on next generation wing" (AFLONEXT)

Start date: Jun 1, 2013, End date: May 31, 2018,

AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Read Project

 41

 FINISHED 

Nanotherapeutics for antibiotic resistant emerging bacterial pathogens (NAREB)

Start date: Feb 1, 2014, End date: Jan 31, 2018,

Increase in antibiotic resistance is a global concern worldwide. The project NAREB's main objective is the optimization of several nanoformulations of antibacterial therapeutics in order to improve the therapy of multi-drug resistant (MDR) tuberculosis (TB) and MRSA infections in European MDR patients.NAREB will address the problem of drug bioavailability inside the infected macrophages, transport ...
Read Project

 16

 FINISHED 

Demonstration of integrated smart water supply solutions at 4 sites across Europe (SmartWater4Europe)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

European water utilities face many problems related to their 3,5 million km’s of distribution networks. Large parts of water distribution networks have to be rehabilitated requiring investments of € 20 billion/year. Prioritization and optimization of investments is needed urgently. In many countries, water quality needs improvement in order to reduce health risks and resources for water production ...
Read Project

 21

 FINISHED 

Engine Module Validators (ENOVAL)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

The ENOVAL project will provide the next step of engine technologies to achieve and surpass the ACARE 2020 goals on the way towards Flightpath 2050. ENOVAL completes the European 7th Framework Programme (FP7) roadmap of Level 2 aero engine projects. ENOVAL will focus on the low pressure system of ultra-high by-pass ratio propulsion systems (12 < BPR < 20) in conjunction with ultra high overall pre ...
Read Project

 37

 FINISHED 

European Autism Interventions - A Multicentre Study for Developing New Medications (EU-AIMS)

Start date: Apr 1, 2012, End date: Mar 31, 2017,

Despite dramatic advances in molecular and imaging technologies, there are currently no effective pharmacological treatments for the core symptoms of autism spectrum disorder (ASD). Major obstructions to this include a lack of aetiologically-driven or pathophysiologically-accurate animal models; an absence of tests that indicate efficacy; and reliance of clinical trials on DSM/ICD10 categories wh ...
Read Project

 29

 FINISHED 

Passive and Active Systems on Severe Accident source term Mitigation (PASSAM)

Start date: Jan 1, 2013, End date: Dec 31, 2016,

"In case of a severe accident in a Nuclear Power Plant (NPP) fission products are released from the degraded fuel and might reach the environment if their confinement is lost and/or bypassed. Given the high radio-toxic nature of fission products for environment and population, their release should be avoided at all costs. This highlights the importance of relying on efficient mitigation systems ca ...
Read Project

 11

 FINISHED 

Optical Infrared Co-ordination Network for Astronomy (OPTICON)

Start date: Jan 1, 2013, End date: Dec 31, 2016,

Optical-infrared astronomy in Europe is in a state of transition and opportunity, with the goal of a viable structured European scale community in sight. A strong astronomical community requires access to state of the art infrastructures (telescopes), equipped with the best possible instrumentation, and with that access being open to all on a basis of competitive excellence. Further, the community ...
Read Project

 26

 FINISHED 

FET Flagship ERA-NET (FLAG-ERA)

Start date: Oct 1, 2013, End date: Sep 30, 2016,

The FET Flagship ERA-NET, called FLAG-ERA, gathers national and regional funding organisation with the goal of supporting the FET Flagship initiatives and more generally the FET Flagship concept. Most funding organisations in Europe participate, either directly or as associated members. The project also fosters international cooperation with funding organisations outside Europe. FLAG-ERA thus offe ...
Read Project

 22

 FINISHED 

User-Centric Networking (UCN)

Start date: Oct 1, 2013, End date: Sep 30, 2016,

Description The UCN project introduces User Centric Networking, which is a communication new paradigm leveraging user information at large, to deliver novel user-centric connected media services.The explosion of information available online and the ubiquity of connected media devices are rendering existing content recommendation and conte ...
Read Project

 11

 FINISHED 

LOw COst Manufacturing and Assembly of Composite and Hybrid Structures (LOCOMACHS)

Start date: Sep 1, 2012, End date: Aug 31, 2016,

The continued use of composite materials in the aerospace industry has been addressed in several past research projects which have focused on new design solutions and composite manufacturing processes. However an area which has been given much less attention up until now is how to achieve a time and cost effective lean assembly production system. The current airframe assembly process of composite ...
Read Project

 33

 FINISHED 

Innovative integrative tools and platforms to be prepared for radiological emergencies and post-accident response in Europe (PREPARE)

Start date: Feb 1, 2013, End date: Jan 31, 2016,

This proposal aims to close gaps that have been identified in nuclear and radiological preparedness following the first evaluation of the Fukushima disaster. It addresses the call Fission-2010-3.3.1: Update of emergency management and rehabilitation strategies and expertise in Europe. The consortium intends to review existing operational procedures in dealing with long lasting releases, address th ...
Read Project

 50

 FINISHED 

Development of antibiofilm coatings for implants (COATIM)

Start date: Jan 1, 2012, End date: Dec 31, 2015,

"The aim of the SME-driven COATIM consortium is to tackle the increasing problem of infections due to biofilms, groups of microorganisms that stick together on different surfaces within the human body and escape conventional antibiotic treatment. Biofilms are typically found on medical devices like implants. The most recent generation of implants with open porosity enable fast osseointegration, bu ...
Read Project

 11

 FINISHED 

One-shot Manufacturing on large scale of 3D up graded panels and stiffeners for lightweight thermoplastic textile composite structures (MAPICC 3D)

Start date: Dec 1, 2011, End date: Nov 30, 2015,

"The MAPICC 3D project and concept aims at developing manufacturing system for 3D shaped, multilayered products based on flexible materials. The ultimate goals are:> The development of integrated and automated process chain able to produce from hybrid thermoplastic yarn to 3D complex shaped thermoplastic composite structure in single step thermoplastic consolidation process.> The development of fl ...
Read Project

 21

 FINISHED 

FI-WARE: Future Internet Core Platform (FI-WARE)

Start date: May 1, 2011, End date: Dec 31, 2014,

The goal of the FI-WARE project is to advance the global competitiveness of the EU economy by introducing an innovative infrastructure for cost-effective creation and delivery of services, providing high QoS and security guarantees. FI-WARE is designed to meet the demands of key market stakeholders across many different sectors, e.g., healthcare, telecommunications, and environmental services. FI- ...
Read Project

 92

 FINISHED 

Sustainable Cleaning and Disinfection in Fresh-Cut Food Industries (SUSCLEAN)

Start date: Jan 1, 2012, End date: Dec 31, 2014,

SUSCLEAN will contribute to the development and implementation of a new generation of environment-friendly equipment sanitation and food product decontamination technologies ensuring food safety. Susclean is focused on minimally-processed vegetables (MPV) i.e. vegetables physically altered from their original form by slicing and cutting but remaining in a fresh state. We will develop knowledge, me ...
Read Project

 24

 FINISHED 

Packaging of futuRe Integrated ModulAr Electronics (PRIMAE)

Start date: Nov 1, 2010, End date: Oct 31, 2014,

"Affordable transport for the citizen relies on innovative solutions and technologies that will result in lower costs and lead-time of the aircraft and its systems. In this area, the packaging of on-board computers is an important contributor.The Packaging of futuRe Integrated ModulAr Electronics (PRIMAE) objective is to develop a new flexible, robust and open aeronautical packaging for the next g ...
Read Project

 20

 FINISHED 

Fire risks assessment and increase of passenger survivability (AircraftFire)

Start date: Jan 1, 2011, End date: Sep 30, 2014,

The project aims for the increase of passenger survivability in the case of fire aboard aircraft focused on the next generation of aircraft. The composite materials and other combustible materials are increasingly used in order to reduce the weight of the aircraft or to higher the passenger comfort, but they raise the fire load significantly. Although these materials have passed the certification ...
Read Project

 13

 FINISHED 

Support Action for Standardisation in Additive Manufactruring (SASAM)

Start date: Sep 1, 2012, End date: Feb 28, 2014,

SASAM's mission is to drive the growth of AM to efficient and sustainable industrial processes by integrating and coordinating Standardisation activities for Europe by creating and supporting a Standardisation organisation in the field of AM.The Additive Manufacturing (AM) concept is based on additive freeform fabrication technologies for the automated production of complex products. Additive Manu ...
Read Project

 18

 FINISHED 

Advanced Lattice Structures for Composite Airframes (ALaSCA)

Start date: Dec 1, 2010, End date: Nov 30, 2013,

The ALaSCA project focuses on maximum weight and cost reduction significant in airframes by developing manufacture-optimized lattice fuselage structures fulfilling fundamental aspects of airworthiness.The idea behind the ALaSCA project is to perform a comprehensive investigation starting with the beneficial geodesic design well-proven in space technology and transferring it to composite aircraft f ...
Read Project

 13

 FINISHED 

Casting of Large Ti Structures (COLTS)

Start date: Oct 1, 2010, End date: Sep 30, 2013,

"This proposal is in response to the call for EU and China collaboration on casting large Ti structures. The consortium consists of 7 EU and 7 Chinese partners. This proposal aims to make a step-change for casting of large Ti components by overcoming some key challenges in the casting process. Such a step-change is critical if the production of large Ti components is to meet the requirement in cos ...
Read Project

 11

 FINISHED 

New manufacturing infrastructure for the production of high quality Natural Fibres (UltraFibre)

Start date: Jan 1, 2010, End date: Dec 31, 2012,

Natural fibres offer a route to the production of sustainable composites, replacing inorganic and petrochemical based fibres with high-embodied energy. One of the main obstacles to the exploitation of natural fibres is the limited consistency of supply, with batch-to-batch variations in quality. Retting – a process whereby plant stems are left to weather in the fields – has been identified as bein ...
Read Project

 14

 FINISHED 

Active Control for Flexible 2020 Aircraft (ACFA 2020)

Start date: Mar 1, 2008, End date: Dec 31, 2011,

"ACFA 2020 deals with innovative active control concepts for ultra efficient 2020 aircraft configurations like the blended wing body (BWB) aircraft. The objective of the designed controllers is an ambitious improvement of ride comfort and handling qualities, as well as load reduction on BWB type aircraft. Due to the unconventional placement of control surfaces, BWB type aircrafts require multi-cha ...
Read Project

 13

 FINISHED 

SMART Container Chain Management (SMARTCM)

Start date: Aug 1, 2008, End date: Oct 31, 2011,

SMART_CM aims to do advanced technology implementation and research in order to overhaul the complete container door-to-door transport chain so that it is more efficient, secure, market driven, and competitive. It systematically analyses current processes and systems, produces new innovative concepts for processes and technologies, and demonstrates all these in a set of 2 world scale Demonstrators ...
Read Project

 31

 FINISHED 

Development of Novel Inspection Systems for Railway Wheelsets (SAFERAIL)

Start date: Oct 1, 2008, End date: Sep 30, 2011,

"The contribution of the rail industry to the economic growth of the EU member states is widely acknowledged. Very recently, the European rail industry has started showing signs of recovery after a long period of steady decline. The technological advances in train design during the last few decades have led to the manufacturing of faster and more comfortable trains making rail transport a more att ...
Read Project

 11