Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 
The physical laws of diffraction generally limit the spatial resolution of optical systems, being about 200 nm for light in the visible range. Within ChipScope we want to overcome this limit by developing the scientific and technological basis for a completely new approach to optical superresolution, based on semiconductor nano Light Emitting Diode (nanoLED) arrays with individual pixel operation. ...
Read Project

 7

 FINISHED 
Companion diagnostics are crucial for drug development and disease management with regard to patient selection, therapy planning and monitoring. Nanomedicines such as antibodies have been proven to be optimal disease-targeting agents because they generally exhibit superior target uptake and retention. However, to date, nuclear imaging of nanomedicines has been limited to the use of long-lived isot ...
Read Project

 6

 FINISHED 
The EN-ACTI2NG program (European Network on Anti-Cancer Immuno-Therapy Improvement by modification of CAR and TCR Interactions and Nanoscale Geometry) emanates from the recent clinical evidence that T cells expressing engineered tumor-specific immune receptors can eradicate certain tumors that do not respond to conventional treatment. To obtain T cells with reactivity to a wider array of tumors an ...
Read Project

 11

 FINISHED 
Advanced Microscopy techniques are widely recognized as one of the pillars onto which the research and manufacture of Nanotechnology based products is sustained. At present, the greatest challenge faced by these techniques is the realization of fast and non-destructive tomographic images with chemical composition sensitivity and with sub-10 nm spatial resolution, in both organic and inorganic mate ...
Read Project

 10

 FINISHED 
A novel concept for a photo-electro-catalytic (PEC) cell able to directly convert water and CO2 into fuels and chemicals (CO2 reduction) and oxygen (water oxidation) using exclusively solar energy will be designed, built, validated, and optimized. The cell will be constructed from cheap multifunction photo-electrodes able to transform sun irradiation into an electrochemical potential difference (e ...
Read Project

 15

 FINISHED 
An increasing number of nanomaterials (NMs) are entering the market in every day products spanning from health care and leisure to electronics, cosmetics and foodstuff. Nanotechnology is a truly enabling technology, with unlimited potential for innovation. However, the novelty in properties and forms of NMs makes the development of a well-founded and robust legislative framework to ensure safe dev ...
Read Project

 27

 FINISHED 
E-CAM will create, develop and sustain a European infrastructure for computational science applied to simulation and modelling of materials and of biological processes of industrial and societal importance. Building on the already significant network of 15 CECAM centres across Europe and the PRACE initiative, it will create a distributed, sustainable centre for simulation and modelling at and acro ...
Read Project

 18

 FINISHED 

OMT - Optomechanical Technologies (OMT)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

The proposed project is built on the successful training and research experience of the leading European research groups working in the field of cavity optomechanics. Our ENT unites a total of 14 leading groups in the field, of which two are major industrial players that utilize MEMS and NEMS - Bosch and IBM. The main goal of the project is to exploit optomechanical interactions in views of novel ...
Read Project

 14

 FINISHED 
FlowerPower aims at establishing a new generation of horticulturists capable of exploiting plant genetic resources in an innovation oriented way using cutting edge technology. The co-operation between the professional horticultural industry, a research-oriented company in the field of functional genomics and scientists from five Universities from 3 countries addresses urgent needs in the non-acade ...
Read Project

 4

 FINISHED 
The consortium has chosen the topic of circular economy (CE) as the focus of this project, because it concerns the transition from a take – make – use – dispose model that depletes natural resources and destroys ecosystems to a circular model where the value of products, materials and resources is maintained in the economy for as long as possible and the generation of waste is minimized. It has be ...
Read Project

 11

 FINISHED 
Smart Home (SH) provides a promising approach to assisted living for the ageing population. Yet it still remains a challenge to develop and deploy such solutions in a large scale due to the lack of an easy-to-use technology infrastructure and application exemplars. This problem arises from the nature of the SH field: multidisciplinary, diverse in its applications, and with multiple stakeholders. W ...
Read Project

 10

 FINISHED 
ARCADES aims at disrupting the traditional paradigm in Computer-Aided Design (CAD) by exploiting cutting-edge research in mathematics and algorithm design. Geometry is now a critical tool in a large number of key applications; somewhat surprisingly, however, several approaches of the CAD industry are outdated, and 3D geometry processing is becoming increasingly the weak link. This is alarming in s ...
Read Project

 9

 FINISHED 

Autologous Stem Cell Seeded Tissue Engineered Trachea (TETRA)

Start date: Jan 1, 2016, End date: Dec 31, 2019,

CLINICAL PROBLEM AND UNMET NEEDThere are 11,827 patients with severe structural airway disease in Europe. Even with the current standard of care, when hospitalised this group of patients has a 22% risk of dying. Patients are currently subjected to repeated surgical interventions (stent insertion) which have a high failure rate. Other therapeutic strategies under development include synthetic trac ...
Read Project

 14

 FINISHED 
The evidence base of Internet-based interventions in the prevention and treatment of mental health conditions has rapidly grown in the past decade. Yet many European countries (e.g., Germany, Austria, Switzerland, Great Britain, The Netherlands, Spain) have not implemented these promising approaches into health systems. Individuals with risk conditions or distinct mental health problems interested ...
Read Project

 13

 FINISHED 

Recognition and Enrichment of Archival Documents (READ)

Start date: Jan 1, 2016, End date: Jun 30, 2019,

"The overall objective of READ is to implement a Virtual Research Environment where archivists, humanities scholars, computer scientists and volunteers are collaborating with the ultimate goal of boosting research, innovation, development and usage of cutting edge technology for the automated recognition, transcription, indexing and enrichment of handwritten archival documents. This Virtual Resear ...
Read Project

 15

 FINISHED 

High level Integrated SEnsor for NanoToxicity Screening (HISENTS)

Start date: Apr 1, 2016, End date: Mar 31, 2019,

The HISENTS vision is to address the problem of the dearth of high-quality tools for nano-safety assessment by introducing an innovative multimodular high throughput screening (HTP) platform including a set of individual modules each representing a critical physiological function connected and integrated in a hierarchical vectorial manner by a microfluidic network. The increase of the capacity to ...
Read Project

 11

 FINISHED 
"Epithelial ovarian cancer (EOC) is the most lethal gyncaecological malignancy causing 41900 deaths annually in Europe. The predominance of aggressive Type II tumours, which are characterised by a high frequency of p53 mutations, and primary or acquired resistance to platinum-based chemotherapy profoundly contribute to the high mortality rate. With current standard therapy the median overall survi ...
Read Project

 20

 FINISHED 
Substructural logics are formal reasoning systems that refine classical logic by weakening the structural rules in Gentzen sequent calculus.While classical logic generally formalises the notion of truth, substructural logics allow to handle notions such as resources, vagueness, meaning, and language syntax, motivated by studies in computer science, epistemology, economy, and linguistics. Moreover, ...
Read Project

 13

 FINISHED 
2D-INK is targeted at developing inks of novel 2D semiconducting materials for low-cost large-area fabrication processes on insulating substrates through a new methodology, which will exceed the properties of state-of-the-art graphene- and graphene oxide based inks. Achieving this would represent an important step forward in the processing of 2D semiconducting materials and will provide the key pa ...
Read Project

 10

 FINISHED 
Global demand for minerals is growing rapidly, driven by rapid population growth, urbanisation and an increasingly diverse range of technical applications. Global material supply chains linking the extraction, transport and processing stages of raw materials have become increasingly complex and today involve multiple players and product components. An interactive platform that provides transparenc ...
Read Project

 16

 FINISHED 
STREPSYNTH aims to set-up a Streptomyces-based new industrial production platform (SNIP) for high value added biomolecules. Streptomyces lividans was chosen as a bacterial host cell because it has been already shown to be highly efficient for the extracellular production of a number of heterologous molecules that vary chemically, has a robust tradition of industrial fermentation and is fully acces ...
Read Project

 17

 FINISHED 

Open Access Infrastructure for Research in Europe 2020 (OpenAIRE2020)

Start date: Jan 1, 2015, End date: Jun 30, 2018,

OpenAIRE2020 represents a pivotal phase in the long-term effort to implement and strengthen the impact of the Open Access (OA) policies of the European Commission (EC), building on the achievements of the OpenAIRE projects. OpenAIRE2020 will expand and leverage its focus from (1) the agents and resources of scholarly communication to workflows and processes, (2) from publications to data, software ...
Read Project

 50

 FINISHED 
"The purpose of Project VALCRI is to create a Visual Analytics-based sense-making capability for criminal intelligence analysis by developing and integrating a number of technologies into a coherent working environment for the analyst we call the Reasoning Workspace. Conceptually, the Reasoning Workspace comprises three areas: (i) a Data Space which will enable an analyst to see what data and them ...
Read Project

 19

 FINISHED 
Heat management is a paramount challenge in many cutting edge technologies, including new GaN electronic technology, turbine thermal coatings, resistive memories, or thermoelectrics. Further progress requires the help of accurate modeling tools that can predict the performance of new complex materials integrated in these increasingly demanding novel devices. However, there is currently no general ...
Read Project

 7

 FINISHED 
The project NANO-CATHEDRAL aims at developing, with a nano-metric scale approach, new materials, technologies and procedures for the conservation of deteriorated stones in monumental buildings and cathedrals and high value contemporary architecture, with a particular emphasis on the preservation of the originality and specificity of materials. The objective is providing “key tools” for restoration ...
Read Project

 19

 FINISHED 

Graphene-based disruptive technologies (GrapheneCore1)

Start date: Apr 1, 2016, End date: Mar 31, 2018,

This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Read Project

 158

 FINISHED 
The AQUAVALENS consortium has brought together SMEs, Industries, Universities and Research Institutes with the mission of protecting the health of European Citizens from contaminated drinking water and water used in food processing. We will achieve this by developing sustainable technologies to enable water system managers whether in large or small water systems or within food growers or manufactu ...
Read Project

 43

 FINISHED 

Clearing Clutter Bit by Bit (SQUIRREL)

Start date: Feb 1, 2014, End date: Jan 31, 2018,

Clutter in an open world is a challenge for many aspects of robotic systems, especially for autonomous robots deployed in unstructured domestic settings, affecting navigation, manipulation, vision, human robot interaction and planning.SQUIRREL addresses these issues by actively controlling clutter and incrementally learning to extend the robot's capabilities while doing so. We term this the B3 (bi ...
Read Project

 10

 FINISHED 

solving CHAllenges in Nuclear DAta (CHANDA)

Start date: Dec 1, 2013, End date: Nov 30, 2017,

"The CHANDA project main objective is to address the challenges in the field of nuclear data for nuclear applications and its acronym stands for solving CHAllenges in Nuclear DAtaThe project will prepare a proposal for an organization that will coordinate the nuclear data research program, and the infrastructures and capabilities of the EU Member States in a stable structure, well integrated with ...
Read Project

 35

 FINISHED 
Nanotechnology is a key enabling technology. Still existing uncertainties concerning EHS need to be addressed to explore the full potential of this new technology. One challenge consists in the development of methods that reliably identify, characterize and quantify nanomaterials (NM) both as substance and in various products and matrices. The European Commission has recently recommended a definit ...
Read Project

 30

 FINISHED 

Photonic Integrated Compound Quantum Encoding (PICQUE)

Start date: Sep 1, 2013, End date: Aug 31, 2017,

"Quantum information was born from the merging of information science and quantum physics. Its main objective consists of harnessing the quantum nature of information and learning how to process it by using physical systems operating according quantum mechanics laws. Being supported by numerous proofs-of-principle, the field is now ready to proceed to move to the next level of applications, where ...
Read Project

 10

 FINISHED 
RESEEPE will bring together design and decision making tools, innovative building fabric manufacturers and a strong demonstration programme to demonstrate the improved building performance through retrofitting. The core idea of the RESSEEPE project is to technically advance, adapt, demonstrate and assess a number of innovative retrofit technologies. Reductions in the area of 50% will be achieved i ...
Read Project

 27

 FINISHED 
Embedded systems are the key innovation driver to improve almost all mechatronic products with cheaper and even new functionalities. Furthermore, they strongly support today's information society as inter-system communication enabler.Consequently boundaries of application domains are alleviated and ad-hoc connections and interoperability play an increasing role. At the same time, multi-core and ma ...
Read Project

 101

 FINISHED 

SUSTAINABLE NANOTECHNOLOGIES (SUN)

Start date: Oct 1, 2013, End date: Mar 31, 2017,

SUN (Sustainable Nanotechnologies) is the first project addressing the entire lifecycle of nanotechnologies to ensure holistic nanosafety evaluation and incorporate the results into tools and guidelines for sustainable manufacturing, easily accessible by industries, regulators and other stakeholders. The project will incorporate scientific findings from over 30 European projects, national and inte ...
Read Project

 38

 FINISHED 

Dependable Embedded Wireless Infrastructure (DEWI)

Start date: Mar 1, 2014, End date: Feb 28, 2017,

DEWI (dependable embedded wireless infrastructure) envisions to significantly foster Europe’s leading position in embedded wireless systems and smart (mobile) environments such as vehicles, railway cars, airplanes and buildings. These environments comprise wireless sensor networks and wireless applications for citizens and professional users. Therefore the consortium introduces the concept of a “s ...
Read Project

 61

 FINISHED 
High current coated conductors (CC´s) have high potential for developing electrical power applications and very high field magnets. The key issues for market success are low cost robust processes, high performance and a reliable manufacturing methodology of long length conductors. In recent years EU researchers and companies have made substantial progress towards these goals, based on vacuum (PLD) ...
Read Project

 22

 FINISHED 
The central hypothesis of this project is that socio-economic, socio-demographic, ethnic and cultural diversity can positively affect social cohesion, economic performance and social mobility of individuals and groups. A better social cohesion, higher economic performance and increased chances for social mobility will make European cities more liveable and more competitive. In this period of long- ...
Read Project

 17

 FINISHED 
Chemical-looping combustion (CLC) has unique potential for reducing energy and cost penalty for CO2 capture, as it avoids the costly gas separation of other CO2 capture technologies. Early deployment is seen in natural gas steam generation, where gas-to-steam efficiency penalty with CLC is below 1%-point compared to 15%-points with amine scrubbing and 8%-points with oxyfuel combustion, all for 95% ...
Read Project

 17

 FINISHED 

Securing Health.Emergency.Learning.Planning (S-HELP)

Start date: Feb 1, 2014, End date: Jan 31, 2017,

Volatile events such as disasters bring the prospect of rapid contagion and the threat of disastrous impacts for Europe. Vulnerabilities and cascading effects can result in significant injuries, illness and loss of life. Damage to health infrastructure, demand for medical attention, displacement and major outbreaks all place a strain on Health Services. Preparedness and response capabilities of He ...
Read Project

 10

 FINISHED 

Thermodynamics of Mesoscopic Quantum Systems (TherMiQ)

Start date: Jan 1, 2014, End date: Dec 31, 2016,

A quantum technology going beyond microscopic borders will be confronted with aspects of thermodynamics that are yet to be understood. This is important, both from a fundamental perspective and with a view to development of quantum devices. Here we propose a comprehensive research programme -- which we dub TherMiQ -- aimed at developing a general framework that brings together thermodynamics and t ...
Read Project

 7