Search for European Projects

10 European Projects Found

Searched on 125080 European Projects

 FINISHED 
Calcium Carbonate Looping (CCL) is a promising long-term technology for low-cost post combustion CO2 capture for fossil fuels using limestone based solid sorbents. It combines the advantages of a small efficiency penalty of 5 to 7 % points and a low CO2 capture cost compared to competing technologies currently under development. First tests performed on the 1 MWth scale have confirmed the feasibil ...
Read Project

 11

 FINISHED 
The aim is to develop a heat resistant steel with a 100 000 hour creep strength of 100 MPa at 650°C. This allows increasing the thermal efficiency of fossil power plants to over 50%, which is 30% higher than the present standard in most existing power plants. The CO2 emissions are reduced accordingly. The consortium combines the expertise of a steelmaker, two utility companies, an engineering cons ...
Read Project

 11

 FINISHED 
The intelligent and cost effective use of CCS technologies requires new strategies to increase the net efficiency of coal fired power plants. Among them, the most promising are summarised as below:- Increase working steam temperature and pressure in new USC power plants (350-370 bar, 700/720°C minimum), and hence increase the severity of fireside operating conditions,- Promote clean coal technolog ...
Read Project

 26

 FINISHED 
Green eMotion aims at enabling mass deployment of electromobility in Europe. To achieve this, major players from industry, the energy sector, municipalities as well as universities and research institutions have joined forces to develop and demonstrate a commonly accepted and user-friendly framework consisting of interoperable and scalable technical solutions in connection with a sustainable busin ...
Read Project

 44

 FINISHED 

Research into Impacts and Safety in CO2 Storage (RISCS) (RISCS)

Start date: Jan 1, 2010, End date: Dec 31, 2013,

"Although significant leakage from CO2 storage sites is not expected, if it did occur there could be adverse environmental consequences, which are not well constrained. The objective of RISCS is to provide fundamental research on environmental impacts, necessary to underpin frameworks for the safe management of CO2 storage sites. To achieve this, RISCS will quantitatively assess environmental impa ...
Read Project

 23

 FINISHED 

Recovered Fuels combined with Biomass (RECOMBIO)

Start date: Jan 1, 2010, End date: Dec 31, 2013,

The RECOMBIO project is concerned with developments and demonstrations of innovative approaches to the high efficient co-utilisation of low quality biomasses and Solid Recovered Fuels (SRF) produced from municipal solid waste (MSW) for electricity production and combined heat and power (CHP) usage, at competitive costs, high plant availability, and advanced energy efficiency. The production of qua ...
Read Project

 15

 FINISHED 

CO2 Site Closure Assessment Research (CO2CARE)

Start date: Jan 1, 2011, End date: Dec 31, 2013,

CO2CARE aims to support the large scale demonstration of CCS technology by addressing the research requirements of CO2 storage site abandonment. It will deliver technologies and procedures for abandonment and post-closure safety, satisfying the regulatory requirements for transfer of responsibility. The project will focus on three key areas: well abandonment and long-term integrity; reservoir mana ...
Read Project

 23

 FINISHED 

Integrated European Industrial Risk Reduction System (IRIS)

Start date: Oct 1, 2008, End date: Mar 31, 2012,

Current practices in risk assessment and management for industrial systems are characterized by its methodical diversity and fragmented approaches. In retrospect these risk and safety paradigms resulted from diverse industries driven and limited by available knowledge and technologies. A change based on industry driven R&D work is needed. At present the European Industry recognised their obligatio ...
Read Project

 37

 FINISHED 

CO2 Enhanced Separation and Recovery (CESAR)

Start date: Feb 1, 2008, End date: May 31, 2011,

"CESAR aims for a breakthrough in the development of low-cost post-combustion CO2 capture technology to provide economically feasible solutions for both new power plants and retrofit of existing power plants which are responsible for the majority of all anthropogenic CO2 emissions (worldwide, approx. 5,000 power plants emit around 11 GtCO2/year). CESAR focuses on post-combustion as it is the only ...
Read Project

 22

 FINISHED 
"The project aims at integrating modules of teaching modules about economics and management in the curricula for engineers;" The specific objectives are: "? Intégrer des modules d’enseignement en économie et management dans les curricula d’ingénieurs? Intégrer des modules d’enseignement en technologies et énergie, dans les curricula d’économistes? Créer des enseignements des fondements et instrume ...
Read Project

 16