Search for European Projects

15 European Projects Found

Searched on 125080 European Projects

 FINISHED 

More Affordable Aircraft structure through eXtended, Integrated, and Mature nUmerical Sizing (MAAXIMUS)

Start date: Apr 1, 2008, End date: Sep 30, 2016,

Even though composite materials are more and more used in modern airframes, many significant improvements are still achievable. Firstly, the substitution of the assembly of many small composite parts by a single one-shot large part provides additional weight reduction. Secondly, the final assembly line process must be adapted to composite properties (lack of ductility, stiffness). Thirdly, if the ...
Read Project

 60

 FINISHED 

Physical processing of molten light alloys under the influence of external fields (EXOMET)

Start date: Jun 1, 2012, End date: Jul 31, 2016,

The ExoMet proposal revolves around innovative liquid metal engineering and the application of external physical fields, in order to significantly influence the microstructures and properties of light alloys, such as aluminium and magnesium. Three types of external fields will be explored, namely: electromagnetic, ultrasonic and intensive mechanical shearing.To meet the future EU challenges of lig ...
Read Project

 30

 FINISHED 

Aviation Noise Research Network and Coordination (X-NOISE EV)

Start date: Dec 1, 2010, End date: Nov 30, 2015,

The X-NOISE EV Coordination Action, through its network structure and comprehensive workplan involving experts groups, scientific workshops, international cooperation seminars and a common information system, addresses the noise challenges faced by Aviation. To this end, it will more specifically:- Evaluate EU-funded projects results and assess their contribution to the state-of-the-art.- Formulat ...
Read Project

 28

 FINISHED 

Aviation Safety and Certification of new Operations and Systems (ASCOS)

Start date: Jul 1, 2012, End date: Sep 30, 2015,

"Fundamental changes in the institutional arrangements for aviation regulation in Europe, the introduction of new technologies and operations, and demands for higher levels of safety performance call for the adaptation of existing certification processes. Therefore, the main objective of ASCOS is to develop novel certification process adaptations and supporting safety driven design methods and too ...
Read Project

 15

 FINISHED 

Open Collaborative Model for Tuberculosis Lead Optimisation (ORCHID)

Start date: Jan 1, 2011, End date: Jun 30, 2015,

"Early stage Drug Discovery efforts over the last 5 years have resulted in the identification of a number of promising lead compounds in the fight against TB. These leads need to be further progressed and optimised into candidates for pre-clinical development through the Drug Development progression cascade.Three compound families are of particular interest: 1) InhA Inhibitors, 2) New potent whole ...
Read Project

 14

 FINISHED 

Monitoring Atmospheric Composition and Climate Interim Implementation (MACC II)

Start date: Nov 1, 2011, End date: Jul 31, 2014,

MACC II (Monitoring Atmospheric Composition and Climate – Interim Implementation) is designed to meet the requirements that have been expressed for prototype operational GMES services for the atmospheric domain. From late-2011 MACC II will continue the operation and development of the GMES service lines established by the MACC project and prepare for its transition in 2014 to become the atmospheri ...
Read Project

 39

 FINISHED 

Supporting the Use of Research Evidence (SURE) for Policy in African Health Systems (SURE)

Start date: Jun 1, 2009, End date: May 31, 2014,

Inadequate access to and use of research evidence to inform health policy limits the achievement of universal and equitable access to healthcare, hinders quality improvement and makes it difficult to use healthcare resources wisely. Poorly informed decision-making about health policies and systems is one of the reasons why services fail to reach those most in need, health indicators are off track, ...
Read Project

 13

 FINISHED 

European Collaborative Dissemination of Aeronautical research and applications (E-CAERO)

Start date: Sep 1, 2009, End date: Oct 31, 2013,

"The aim of E-CAero is to harmonize the dissemination between six european associations in the aeronautics/turbomachinery sector. The main objectives are: 1) identifying existing and new areas of interest and clarifying skills, experiences and capabilities of the partners in the relevant technological areas of multi-physics Aeronautics and Aero engines; 2) developing new concepts of collaborative ...
Read Project

 7

 FINISHED 

Innovative Technological platform for Compact and Reliable Electronic integrated in Actuators and Motors (CREAM)

Start date: Sep 1, 2009, End date: Feb 28, 2013,

"The actual political, environmental and economical trends applied to air transport lead to move in the future to the All Electric Aircraft. The goal of this concept is to eliminate as many hydraulic power sources and complicated circuit of high-pressure hydraulic lines as possible. The CREAM objective is to reach new high performance and reliability capacities of Electro-Mechanical Actuators in ...
Read Project

 15

 FINISHED 

Actinide reCycling by SEParation and Transmutation (ACSEPT)

Start date: Mar 1, 2008, End date: Sep 30, 2012,

"Actinide recycling by separation and transmutation is considered worldwide and particularly in several European countries as one of the most promising strategies to reduce the inventory of radioactive waste, thus contributing to make nuclear energy sustainable. Consistently with potentially viable recycling strategies, the Collaborative Project ACSEPT will provide a structured R&D framework to de ...
Read Project

 35

 FINISHED 

Thematic Network on Quality and Certification of EHR systems (EHR-Q-TN)

Start date: Feb 1, 2009, End date: Jan 31, 2012,

EHR-Q-TN is a Thematic Network project that intends to better prepare the health community across Europe for systematic and comparable quality assurance and certification of e-Health products, more specifically of the Electronic Healthcare Record systems. The project fits with objective 1.6 of the 2nd Call for Proposals for the CIP-ICT PSP program: "Improving certification of eHealth products", mo ...
Read Project

 28

 FINISHED 

Monitoring Atmospheric Composition and Climate (MACC)

Start date: Jun 1, 2009, End date: Dec 31, 2011,

"MACC (Monitoring Atmospheric Composition and Climate) is designed to meet the requirements that have been expressed for the pilot Core GMES Atmospheric Service. The project has been prepared by the consortia of the FP6 project GEMS and the GSE project PROMOTE, whose core service lines will provide the starting point for MACC. From mid-2009 MACC will continue, improve, extend, integrate and valida ...
Read Project

 45

 FINISHED 

Rehabilitation of natural habitats on the Tailles Plateau (PLTTAILLES)

Start date: Jan 1, 2006, End date: Dec 31, 2010,

Background The Tailles Plateau is one of the highest plateaus in Wallonia, Belgium. While the altitude is relatively low (500-650m high) the habitats found on the plateau are characterised by mountain vegetation. They include several types of bog habitats, forests and grasslands and accommodate many rare and endangered species. Examples of species found o ...
Read Project

 3

 FINISHED 

Rehabilitation of habitats in military camps in Wallonia (NATURA2MIL)

Start date: Jan 1, 2006, End date: Dec 31, 2010,

Background Having avoided land use intensification, for example through agricultural practices, military areas often contain areas of high ecological value and are of great significance for biodiversity conservation. In many cases, historical landscape types and natural habitats were included in military areas in the 19th Century and still exist there. Mi ...
Read Project

 4

 FINISHED 

Atomic QUantum TEchnologies (AQUTE)

End date: Feb 1, 2010,

The overall objectives of the AQUTE project areA) To develop quantum technologies based on atomic, molecular and optical (AMO) systems for* scalable quantum computation;* entanglement-enabled technologies like metrology and sensing.B) To establish and exploit new interdisciplinary connections, coming from AMO physics, but also including concepts and experimental settings of solid state systems, in ...
Read Project

 26