Search for European Projects

22 European Projects Found

Searched on 125080 European Projects

 FINISHED 

INitiative to bring the 2nd generation of ThermoElectric Generators into industrial ReALity (INTEGRAL)

Start date: Dec 1, 2016, End date: Nov 30, 2019,

Thermoelectric materials have been studied for several decades now. Improved TE materials are emerging with the so-called second-generation thermoelectric (GEN2 TE) materials: silicides and half-Heusler. These materials are low-cost, based on most earth-abundant elements and eco-friendly materials, and can impact positively European industry and society by converting wasted heat into electricity. ...
Read Project

 14

 FINISHED 

NOVel, critical materials free, high Anisotropy phases for permanent MAGnets, by design. (NOVAMAG)

Start date: Apr 1, 2016, End date: Sep 30, 2019,

The demand for lower dependency on critical raw materials (CRM) such as rare earths (RE) is not only a European but a global problem that demands immediate action. The purpose of this project is to exploit advanced theoretical and computation methods together with state-of-the-art materials preparation and characterization techniques, to develop the next generation RE-free/lean permanent magnets ( ...
Read Project

 18

 FINISHED 

Innovative Coarsening-resistant Alloys with enhanced Radiation tolerance and Ultra-fine -grainedStructure for aerospace application (ICARUS)

Start date: Sep 1, 2016, End date: Aug 31, 2019,

ICARUS proposes a new thermodynamic methodology able to identify the elements and the relative chemical composition allowing a nanocrystalline state to occupy a relative minimum of the Gibbs free energy, which makes the nanostructure reasonably stable against coarsening. This approach will be integrated, in synergy with multiscale and thermodynamic (Nano-Calphad) modeling, in order to implement a ...
Read Project

 11

 FINISHED 

PROtective composite Coatings via Electrodeposition and Thermal Spraying (PROCETS)

Start date: Jan 1, 2016, End date: Jun 30, 2019,

Wear and corrosion of materials causes losses of 3-4% of GDP in developed countries and billions of Euros are spent annually on capital replacement and control methods for wear and corrosion infrastructure. As a result many important industries are dependent on surface engineering of protective coatings, making it one of the main critical technologies underpinning the competitiveness of EU industr ...
Read Project

 16

 FINISHED 

New aerospace advanced cost effective materials and rapid manufacturingtechnologies (MMTech)

Start date: May 1, 2015, End date: Apr 30, 2019,

This project will focus on the development of technologies and methodologies which have the potential to save costs and time across the whole life cycle of the aircraft (design, production, maintenance, overhaul, repair and retrofit), including for certification aspects. Moreover it will also target the integration of additional functions or materials in structural components of the aircraft, the ...
Read Project

 14

 FINISHED 

Robust and affordable process control technologies for improving standards and optimising industrial operations (ProPAT)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

The Process Industries require a high degree of automation, monitoring, and advanced simulation and control for their often complex manufacturing processes and operations. Emphasis is on continuous or batch production, mixing, reaction and separation of materials of higher value. Indeed, increased globalisation and competition are drivers for process analytical technologies (PAT) that enable seaml ...
Read Project

 18

 FINISHED 

NANOmaterials for the REStoration of works of ART (NANORESTART)

Start date: Jun 1, 2015, End date: Nov 30, 2018,

Currently there is a lack of methodologies for the conservation of modern and contemporary artworks, many of which will not be accessible in very short time due to extremely fast degradation processes. The challenge of NANORESTART (NANOmaterials for the REStoration of works of ART) will be to address this issue within a new framework with respect to the state of the art of conservation science. NA ...
Read Project

 26

 FINISHED 

Processing and control of novel nanomaterials in packaging, automotive and solar panel processing lines (OptiNanoPro)

Start date: Oct 1, 2015, End date: Sep 30, 2018,

Nanocomposites are promising for many sectors, as they can make polymers stronger, less water and gas permeable, tune surface properties, add functionalities such as antimicrobial effects. In spite of intensive research activities, significant efforts are still needed to deploy the full potential of nanotechnology in the industry. The main challenge is still obtaining a proper nanostructuring of t ...
Read Project

 15

 FINISHED 

Intensified by Design® for the intensification of processes involving solids handling (IbD)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

IbD® will create a holistic platform for facilitating process intensification in processes in which solids are an intrinsic part, the cornerstone of which will be an intensified-by-design® (IbD). The IbD approach is hinged on the use of robust data about a process to ‘redesign’, modify, adapt and alter that process in a continuous, intensified system, and will be the new paradigm in the intensific ...
Read Project

 23

 FINISHED 

Development of an integrated approach based on validated and standardized methods to support the implementation of the EC recommendation for a definition of nanomaterial (NANODEFINE)

Start date: Nov 1, 2013, End date: Oct 31, 2017,

Nanotechnology is a key enabling technology. Still existing uncertainties concerning EHS need to be addressed to explore the full potential of this new technology. One challenge consists in the development of methods that reliably identify, characterize and quantify nanomaterials (NM) both as substance and in various products and matrices. The European Commission has recently recommended a definit ...
Read Project

 30

 FINISHED 

Pilot manufacturing line for production of highly innovative materials (PILOTMANU)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

The vision of PilotManu is the upscale of the current mechanical alloying technological facility into a powder manufacturing pilot line by further developing existing IPR-covered results owned by the SMEs in the consortium related to mechanical alloying technology and to innovative powder materials for different applications.The baseline technology that will be upscaled from a technological facili ...
Read Project

 10

 FINISHED 

SUSTAINABLE NANOTECHNOLOGIES (SUN)

Start date: Oct 1, 2013, End date: Mar 31, 2017,

SUN (Sustainable Nanotechnologies) is the first project addressing the entire lifecycle of nanotechnologies to ensure holistic nanosafety evaluation and incorporate the results into tools and guidelines for sustainable manufacturing, easily accessible by industries, regulators and other stakeholders. The project will incorporate scientific findings from over 30 European projects, national and inte ...
Read Project

 38

 FINISHED 

A FAST process and production system for high-throughput, highly flexible and cost-efficient volume production of miniaturised components made of a wide range of materials (Micro-FAST)

Start date: Sep 1, 2013, End date: Feb 28, 2017,

The aim of the project is to develop a completely new manufacturing system for the volume production of miniaturised components by overcoming the challenges on the manufacturing with a wide range of materials (metallic alloys, composites, ceramics and polymers), through: (i) developing a high-throughput, flexible and cost-efficient process by simultaneous electrical-forming and electric-fast-sinte ...
Read Project

 17

 FINISHED 

Multifunctional facades of reduced thickness for fast and cost-effective retrofitting (MF-RETROFIT)

Start date: Sep 1, 2013, End date: Feb 28, 2017,

The project aims to deal with the numerous requirements of facade panel retrofitting by developing a light-weight, durable, cost effective and high performance panel. Its layered structure allows for separate but also synergistic function regarding high thermal and acoustic insulation, excellent mechanical properties, up to standards flame retardancy and photocatalytic activity. Employing nanofill ...
Read Project

 10

 FINISHED 

Oxide Dispersion Strengthened Materials for the Additive Manufacture of High Temperature Components in Power Generation (OXIGEN)

Start date: Feb 1, 2013, End date: Jan 31, 2017,

OXIGEN will combine leading-edge European expertise in the manufacture of specialist powder alloys (Mechanical Alloying), knowledge of niche high-temperature materials and capabilities in additive manufacturing. This will produce an integrated, world-leading capability to directly manufacture from powder to part custom-designed, best-in-class high temperature alloys for power generation component ...
Read Project

 11

 FINISHED 

High energy density Mg-Based metal hydrides storage system (EDEN)

Start date: Oct 1, 2012, End date: Jun 30, 2016,

EDen aims at building a forefront scientific, technological and industrial expertise in energy storage and recovery system. In the past years hydrogen has been indicated as an advantageous energy carrier under many points of view, mainly environment preservation and high energy density.The necessity of hydrogen on specific mobile applications and energy backup system is promoted by the growing dem ...
Read Project

 7

 FINISHED 

Ultrasensitive plasmonic detection of single nanoparticles (NANODETECTOR)

Start date: Jun 1, 2012, End date: Nov 30, 2015,

Controlled or uncontrollabel disposing of nanoparticles in various components of man made or biological matter, may have wanted or undesired consequences. Developing the diagnostic tools to detect and characterize the ’grey goo’ is one of the challeneges of nanotech-era. A development of general technology for detection and analysis of single nanoparticles in complex environment and a development ...
Read Project

 11

 FINISHED 

Nano-materials for the conservation and preservation of movable and immovable artworks (NANOFORART)

Start date: Dec 1, 2011, End date: Nov 30, 2014,

The main objective of the NANOFORART proposal is the development and experimentation of new nano-materials and responsive systems for the conservation and preservation of movable and immovable artworks.While the progress in material science has generated sophisticated nanostructured materials, conservation of cultural heritage is still mainly based on traditional methods and conventional materials ...
Read Project

 16

 FINISHED 

NANO/MICRO INTEGRATION IN MICROMANUFACTURING (NANOMICRO)

Start date: Jan 1, 2010, End date: Dec 31, 2013,

The new high productive platform for 3D main objective of NANOMICRO project is to provide the manufacturing industry with an entirely nanomicromanufacturing platform, by way of a new micron scale resolution and an innovative direct parallel-deposition process. The process will be able to deliver a layer wise manufacturing approach using highly focalized powder/heat fluxes, with dimensions in the ...
Read Project

 12

 FINISHED 

SUPERSONIC DEPOSITION OF NANOSTRUCTURED SURFACES (SUPERSONIC)

Start date: Dec 1, 2009, End date: Nov 30, 2013,

"The basic scientific and technological concept of the project is to use agglomerated nanophased powders to be transferred onto a substrate in the form a coating with very little or none change of crystal structure. This will allow to obtain nano-structured coatings with a crystal size very close to the powder one. The concept will be extended to an important breakthrough concept that is the “Sup ...
Read Project

 12

 FINISHED 

Development of a novel and cost-effective range of nanotech improved coatings to substantially improve NIR (Near Infrared Reflective) properties of the building envelope (COOL-Coverings)

Start date: Jun 1, 2010, End date: May 31, 2013,

Recent work has shown the possibility to drastically increase the reflection performance of the building envelop, using nanotechnologies. Standard metal oxides are already known for their solar reflection properties, but latest developments identified that nanotechnologies can improve Index of Reflectance from an average of 0,35 to 0,85 because of their effectiveness on Near Infrared wavelengths, ...
Read Project

 14

 FINISHED 

STEP UP IN POLYMER BASED RM PROCESSES (STEPUP)

Start date: Jan 1, 2009, End date: Dec 31, 2012,

An innovative mechano-chemical approach (based on the high energy ball milling) will be used for the development of innovative nanopolymers to be used in Rapid Manufacturing (RM) based on Selective Laser Sintering (SLS),by: 1.Structural modification (up nanopolymers stage) using a currently widely used polymer like Polyammide PA (a “nanoPA” will be produced); 2.Alloying (at nanoscale) with differe ...
Read Project

 7