Search for European Projects

18 European Projects Found

Searched on 125080 European Projects

 FINISHED 

HYdrogen ACceptance IN the Transition pHase (HYACINTH)

Start date: Sep 1, 2014, End date: Feb 28, 2017,

There is increasing realisation amongst policy makers and industry that public acceptance is a key issue to deploy and extend H2 technologies and infrastructures in Europe. The development of H2 technologies involve small-scale applications as well as large-scale infrastructures that are influenced by the acceptance of the public, stakeholders, communities and potential customers / users. Previous ...
Read Project

 11

 FINISHED 

Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)

Start date: Oct 1, 2013, End date: Mar 31, 2016,

This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Read Project

 154

 FINISHED 

Recycling of Metallic Materials from Rotorcraft Transmissions (REMART)

Start date: Apr 1, 2013, End date: Sep 30, 2015,

The current research project deals with the analysis and validation of the main helicopter power transmissions recycling processes and the design of recycling protocols in order to make them efficient, profitable and environmentally sustainable. This issue is in the domain of the CLEAN SKY JTI - Green Rotorcraft which has the aim to improve the environmental impact of the components in aeronautic ...
Read Project

 4

 FINISHED 

Low cost design approach through simulations and manufacture of new mould concepts for very high tolerance composite components (ACCUBLADE)

Start date: May 1, 2013, End date: Jun 30, 2015,

The main objective of the ACCUBLADE project, within the Green Rotorcraft Program is the development of a low cost and high accurate moulding process for the manufacturing of rotor blades incorporating an Active Gurney Flap mechanism what would contribute for greener rotorcraft performances with reduced fuel consumption and noise.
Read Project

 1

 FINISHED 

Panel Liquid Infusion Technology (PLIT)

Start date: Apr 1, 2013, End date: Dec 31, 2014,

The current Research Project deals with the development of Advanced CFRP Technologies for the cost-efficient, green and reliable manufacturing of stiffened wing large Aerostructures by Liquid Resin Infusion (LRI). The LRI process, especially for large scale structures, is not yet well mastered and validated simulation tools are a necessary requirement to properly industrialize this technology.Two ...
Read Project

 3

 FINISHED 

Composite fuselage section Wafer Design Approach for Safety Increasing in Worst Case Situations and Joints Minimizing (WASIS)

Start date: Jan 1, 2011, End date: Dec 31, 2014,

"Aeronautics is a key asset for the future of Europe, but nowadays the industry has to face the challenge of “More Affordable, Safer, Cleaner and Quieter” while at the same time accounting for a demand that will triple over the next 20 years. WASIS project aims to rise to this challenge with the development of a composite fuselage structure based on the lattice stiffening concept, optimizing geome ...
Read Project

 14

 FINISHED 

Advanced Composite Integrated Skin Panel structural testing (ACID)

Start date: Apr 1, 2013, End date: Nov 30, 2014,

"Traditional aircraft structures use Aluminium stiffened panels for fuselage, wing and tail plane skins. In recent years stiffened skin panels are manufactured from composite materials instead of Aluminium. The use of composite materials has the potential to reduce aircraft weight, and therefore fuel consumption, and also to reduce maintenance and operational costs. Stiffened panels can be made by ...
Read Project

 1

 FINISHED 

New trends and Market Survey for the end of life of aircrafts. Eco design Guideline (NEMESIS)

Start date: Jan 1, 2013, End date: Jun 30, 2014,

"The current research project deals with the environmental impact, economics and social aspects of the recycling of the materials used for aircaft building.As it has been mentioned the first objective of this proposal is the realization of a market survey on the most important a/c and/or materials used in the actual CS EDA.After the definition of the materials together with the topic manager, in a ...
Read Project

 4

 FINISHED 

Integrated management of product heterogeneous data (iProd)

Start date: Feb 1, 2011, End date: Jan 31, 2014,

Description iProd aims to improve the efficiency and quality of the Product Development Process of innovative products by developing a flexible, service oriented, customer driven software frameworkData and knowledge management technologies are of strategic importance for industrial innovation, provided they are integrated in the company p ...
Read Project

 17

 FINISHED 

Advanced Structural Light-Weight Architectures for Electric Vehicles (E-Light)

Start date: Jan 1, 2011, End date: Dec 31, 2013,

The automotive industry has not yet decided which the optimum architecture solution for electric vehicles is; this and the fact that requirements and constraints deriving from an electrical powertrain are much less stringent in several areas make necessary to study new solutions specifically designed for the particularities of electric vehicles. Therefore E-LIGHT proposal aims at exploring all the ...
Read Project

 8

 FINISHED 

Adaptive seat to reduce neck injuries for female and male occupants (ADSEAT)

Start date: Oct 1, 2009, End date: Mar 31, 2013,

"The development of adaptive safety systems addressing vehicle occupant protection requires the use of in depth knowledge of various occupant features, specifically those related to the risk of injury. All occupants in passenger vehicles are at risk of sustaining whiplash injuries in a low severity crash. Whiplash associated disorders (WAD), so called whiplash injuries, resulting from car crashes, ...
Read Project

 13

 FINISHED 

Field Operational Tests of Aftermarket and Nomadic Devices in Vehicles -International cooperation aspects (TeleFOTinco)

Start date: Oct 1, 2009, End date: Jan 31, 2013,

The objectives of TeleFOT are to assess the impacts of functions provided by aftermarket and nomadic devices in vehicles and raise wide awareness of their traffic safety potential. These devices can provide different types of driver support functions and almost nothing is known about their safety and other impacts yet. The services and functions relate to cooperative driving like providing informa ...
Read Project

 4

 FINISHED 

Field Operational Tests of Aftermarket and Nomadic Devices in Vehicles (TELEFOT)

Start date: Jun 1, 2008, End date: Nov 30, 2012,

Description TeleFOT project will assess the impacts of functions provided by aftermarket and nomadic devices in vehicles and raise wide awareness of their traffic safety potential. The objectives of the TeleFOT project are to assess the impacts of functions provided by aftermarket and nomadic devi ...
Read Project

 29

 FINISHED 

2-WHEELER BEHAVIOUR AND SAFETY (2-BE-SAFE)

Start date: Jan 1, 2009, End date: Dec 31, 2011,

"Powered Two Wheeler (PTW) users are greatly over-involved in serious and fatal crashes. They have between 5 and 25 times the risk of having a fatal crash compared to car drivers, depending on the country. The number of PTWs on European roads has more than doubled over the last two decades. The recent MAIDS (Motorcycle Accident In-Depth Study) study of PTW crashes in Europe found that behavioural ...
Read Project

 27

 FINISHED 

Integrated Human Modelling and Simulation to support Human Error Risk Analysis of Partially Autonomous Driver Assistance Systems (ISi-PADAS)

Start date: Sep 1, 2008, End date: Aug 31, 2011,

The main objective of the ISi-PADAS project is to provide an innovative methodology to support risk based design and approval of Partially Autonomous Driver Assistance Systems (PADAS) focusing on elimination and mitigation of driver errors by an integrated Driver-Vehicle-Environment modelling approach. The methodology contributes to (1) halving the number of road fatalities by 2010 (respect to 200 ...
Read Project

 11

 FINISHED 

European Network to Support the Sustainable Surface Transport SMEs (Star-net Transport)

Start date: May 1, 2008, End date: Jan 31, 2011,

The strategic objective of the Star-Net transport is to increase the participation of surface transport-related SMEs in the surface transport programe. The aim of the Star-Net transport project is to be the first step towards the formation and development of a consolidated structure for support of SMEs in Europe for participation in Sustainable Surface Transport activities, building on the knowled ...
Read Project

 16

 FINISHED 

Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs (SAFERIDER)

Start date: Jan 1, 2008, End date: Dec 31, 2010,

Motorcycle and moped fatalities account for 17,8% of the total number of road accident fatalities in Europe and, compared to a passenger car occupant, a motorcycle rider is 26 times more likely to die in a crash, based on vehicle miles travelled, as riders are among the vulnerable road users.SAFERIDER aims to enhanced PTW riders' safety by applying ADAS/IVIS on PTWs of all types for the most cruci ...
Read Project

 23

 FINISHED 

Setting-up of effective Technological Clinics to address real knowledge needs of Surface Transport industry (TECH-CLINIC SST)

Start date: Apr 1, 2008, End date: Oct 31, 2009,

"TECH-CLINIC SST proposal is aimed at implementing Commissioner Potocnick's vision of the Knowledge Triangle, based on research/innovation/education, by targeting Education and young generations. The expected impact is to have young man and woman highly qualified attracted by surface transport research when time comes to direct their career and identification job opportunities at the service of E ...
Read Project

 5