Search for European Projects

11 European Projects Found

Searched on 125080 European Projects

 FINISHED 

"""2nd Generation Active Wing“ – Active Flow- Loads & Noise control on next generation wing" (AFLONEXT)

Start date: Jun 1, 2013, End date: May 31, 2018,

AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Read Project

 41

 FINISHED 

Nano-carbons for versatile power supply modules (NANOCATE)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

The multidisciplinary consortium of the NanoCaTe project will develop a more efficient thermoelectric- and storage material based on nanocarbon (e.g. graphene and CNT) to reclaim waste heat by thermoelectric generators and to storage the energy in super capacitors or secondary batteries for manifold applications like pulsed sensors or mobile electronic devices.The integration of the developed mate ...
Read Project

 14

 FINISHED 

TFP Strut Qualification (SPS_TFP_SQ)

Start date: Oct 1, 2015, End date: Sep 30, 2017,

This proposal aims at qualification by extensive testing of market relevant carbon fibre struts manufactured with the tailored fibre placement (TFP) technology up to TRL 8 for space applications.A strut is a very common structural element in launchers and satellites. The main novelty of the proposed solution is that even the fittings are carbon (state-of-the-art is metal).The requirements and mark ...
Read Project

 4

 FINISHED 

INTElligent FIXtures for the manufacturing of low rigidity components (INTEFIX)

Start date: Jul 1, 2013, End date: Jun 30, 2016,

In the manufacturing industry, the machining of medium and big size parts with the required and suitable precision is a challenge, especially in high added value products manufactured in small or single-unit batches made of high performance materials like in aeronautic, space or energy sectors, where conventional process engineering and test/error methods are not completely efficient.INTEFIX aims ...
Read Project

 33

 FINISHED 

Combined morphing assessment software using flight envelope data and mission based morphing prototype wing development (CHANGE)

Start date: Aug 1, 2012, End date: Dec 31, 2015,

"Morphing in aircrafts has been studied and used throughout recent time in order to increase their flight envelope. This characteristic is of the upmost importance in order to offer a greater efficiency, versatility and performance during the assigned mission. Moreover an aircraft with the capability to adapt itself to each given situation is prone to achieve positive results to a range of differe ...
Read Project

 9

 FINISHED 

Smart Intelligent Aircraft Structures (SARISTU)

Start date: Sep 1, 2011, End date: Aug 31, 2015,

The project proposal concerns the challenges posed by the physical integration of smart intelligentstructural concepts. It addresses aircraft weight and operational cost reductions as well as animprovement in the flight profile specific aerodynamic performance.This concerns material concepts enabling a conformal, controlled distortion of aerodynamicallyimportant surfaces, material concepts enablin ...
Read Project

 68

 FINISHED 

Industrial validation of Nu-Wave new generation of sustainable and efficient textile machinery and development of a strategy to enter the market (MACH-to)

Start date: Aug 1, 2012, End date: Sep 30, 2014,

Nu-Wave (FP7project 218479 Jan2009-Dec2011), supported textile machinery SMEs in developing a new generation of high-performance machines for facing the crisis and compete in the market with low labour cost countries (specially Far East). The MACH-to project starts on the basis of Nu-Wave results and aims at filling the gap that still separates them from the market.The Nu-Wave demonstrators were h ...
Read Project

 9

 FINISHED 

INNOVATIVE SMART COMPOSITE MOULDS FOR COST-EFFECTIVE MANUFACTURING OF PLASTIC AND COMPOSITE COMPONENTS (COEUS-TITAN)

Start date: Mar 1, 2011, End date: Feb 28, 2014,

Currently, composite moulds are mainly used in open-mould manufacturing processes and in Light RTM (a low-pressure variation of RTM). The proposed project aims to extend the applicability of composite moulds into the more demanding regime of RTM production, as well as to extend the application of the open mould and light RTM techniques in the field of advanced resin systems, where elevated tempera ...
Read Project

 13

 FINISHED 

Leveraging on new knowledge and latest advances in science & technology to allow large communities of EU textile machinery SMEs to innovate their products & keep EU leadership in added value textiles (NU-WAVE)

Start date: Jan 1, 2009, End date: Dec 31, 2011,

"Although Europe keeps the world-wide leadership in the textile market, Far East has become a major manufacturing area. This situation opened new perspectives in fast growing markets for the European manufacturers of textile machines, 95% of which are SMEs. However, as today textile machines mainly consist of established electro-mechanical systems the advantages were only of short duration. An int ...
Read Project

 13

 FINISHED 

Multilayer Piezocomposites for Active Twist Rotor Blade (MulticompAct)

Start date: Dec 1, 2009, End date: Nov 30, 2011,

Novel active twist rotor blades require low profile piezocomposite actuators which are integrated into the blade skin. Operating as solid state actuators they generate a twist deformation of the rotor blade without any friction and wear. To provide sufficient strain it is necessary, that the actuator operates in the piezoelectric d33-mode. State-of-the-art piezocomposites that exploit the d33-effe ...
Read Project

 2

 FINISHED 

"Increase of productivity, safety, greenness and cleanliness in the machining of carbon fiber reinforced composites" (ASPIRATE)

Start date: Jun 1, 2009, End date: May 31, 2011,

"Aerospace has been pioneer in the industrial manufacturing of fibre reinforced composites for high performance components. Composite materials are used extensively as their higher specific properties (properties per unit weight) of strength and stiffness, when compared to metals, offer interesting opportunities for new product design.Still nowadays it is a growing market due to the technical impr ...
Read Project

 7