Search for European Projects

9 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Development and demonstration of flexible multifunctional ETFE module for architectural façade lighting (ETFE-MFM)

Start date: Dec 1, 2013, End date: Nov 30, 2017,

The overall objective of the ETFE-MFM Proposal is the development, evaluation and demonstration of a flexible multifunctional ETFE module for architectural façade lighting. The aim of this proposal is to provide a PV module with embedded additional functionalities designed to be used in ETFE textile architecture for BIPV applications.ETFE-MFM concept is based on the integration of different techno ...
Read Project

 6

 FINISHED 

Integrity Testing of Deep Foundation Piles (PileInspect)

Start date: Dec 1, 2013, End date: Nov 30, 2016,

A hundred thousand kilometres of piles are installed yearly in Europe. Problems can occur during pile driving including spalling of concrete at the pile’s head or point and transverse or spiral cracking. Industry figures suggest that as many as 3-5% of piles fail during installation. If a failure is detected, the cost of that pile is increased 4 times due to the remedial work needed to replace it. ...
Read Project

 10

 FINISHED 

A DEcision Support Tool for Reconstruction and recovery and for the IntEroperability of international Relief units in case Of complex crises situations, including CBRN contamination risks (DESTRIERO)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

Today more people than ever are threatened by disasters, with no regards if natural or man-made. Furthermore, CBRN contamination risks can occur as a consequence of these events. Regions affected are wider and wider and reconstruction and recovery operations are longer-lasting, costly and complex, especially when decontamination is necessary.DESTRIERO aims at developing a next generation post-cris ...
Read Project

 15

 FINISHED 

Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling (FORTISSIMO)

Start date: Jul 1, 2013, End date: Jun 30, 2016,

The importance of advanced simulation to the competitiveness of both large and small companies is well established. The principal objective of Fortissimo is to enable European manufacturing, particularly small to medium enterprises (SMEs), to benefit from the efficiency and competitive advantage inherent in the use of simulation. However, the simulation of, for example, high-pressure gas cylinders ...
Read Project

 96

 FINISHED 

Small Wind Turbine for Urban Environments (WINDUR)

Start date: Nov 1, 2013, End date: May 31, 2016,

As SMEs in the supply chain of small Wind Turbines (WTs), we have identified an excellent opportunity in the urban submarket. The Small Wind market mainly corresponds to turbines installed in rural and isolated areas. Nevertheless, Urban is by far the largest potential market, as 80% of European population lives in cities and the EU Directive 2010/31/EU on Energy Performance of Buildings requires ...
Read Project

 12

 FINISHED 

Sustainable Organic and Low-input Dairying (SOLID) (SOLID)

Start date: Apr 1, 2011, End date: Mar 31, 2016,

"Organic and low-input dairy farming systems are increasingly noted as delivering multifunctional benefits to the agricultural industry and society but technical and economic constraints prevent widespread adoption. SOLID will deliver an innovative toolbox of novel methodologies that will contribute to the competitiveness of the dairy industry and increase the effectiveness with which these benefi ...
Read Project

 26

 FINISHED 

Advanced condition monitoring system for the assessment of wind turbines rotating parts (CMSWIND)

Start date: Jun 1, 2012, End date: May 31, 2015,

Current wind turbine condition monitoring methodologies can be time-consuming and a costly process and fail to achieve the reliability and operational efficiency required by the industry. For these reasons existing vibration-based Condition Monitoring System (CMS) usually fail to detect defects until they become critical.This project will show the applicability of the CMS enabling the prompt detec ...
Read Project

 11

 FINISHED 

Innovative coastal technologies for safer European coasts in a changing climate (THESEUS)

Start date: Dec 1, 2009, End date: Nov 30, 2013,

Coastal areas are vital economic hubs in terms of settlement, industry, agriculture, trade and tourism to mention some key sectors. There are already many coastal problems including erosion, flood risk and long-term habitat deterioration. As economies continue to develop the asset base at risk will grow, while accelerating climate change will increase the likelihood of damaging extreme events, as ...
Read Project

 33

 FINISHED 

Development and Validation of an Automated Non-destructive Evaluation (NDE) Approach for Testing Welded Joints in Plastic Pipes (TestPEP)

Start date: Feb 1, 2010, End date: Apr 30, 2013,

Plastics pipes offer significant advantages over other materials such as cast iron, steel, copper and concrete, for the transportation of fluids such as natural gas, water, effluent and corrosive liquids. They do not corrode; have a longer predicted service life, leading to less frequent replacement; they are less expensive to install due to their light weight and flexibility; and have significant ...
Read Project

 15