Search for European Projects

16 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Zero-defect manufacturing of composite parts in the aerospace industry (ZAero)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

... a leading role in the consortium as far as the multi-stage manufacturing process is concerned. Machine builders (MTorres, Danobat) and research centers will develop the inline quality control, while Dassault Systémes will provide simulation support.
Read Project

 7

 FINISHED 

Real-time optimization of extraction and the logistic process in highly complex geological and selective mining settings (Real-Time-Mining)

Start date: Apr 1, 2015, End date: Mar 31, 2019,

The overall aim of Real-Time-Mining is to develop a real-time framework to decrease environmental impact and increase resource efficiency in the European raw material extraction industry. The key concept of the proposed research promotes the change in paradigm from discontinuous intermittent process monitoring to a continuous process and quality management system in highly selective mining operati ...
Read Project

 14

 FINISHED 

High Altitude Ice Crystals (HAIC)

Start date: Aug 1, 2012, End date: Jan 31, 2017,

Commercial aircraft have been experiencing in-service events while flying in the vicinity of deep convective clouds since at least the early 1990s. Heated probes and engines are the areas of air-craft most prone to mixed phase and glaciated icing threat. In anticipation of regulation changes regarding mixed phase and glaciated icing conditions, the HAIC project will provide the necessary Acceptabl ...
Read Project

 40

 FINISHED 

More Affordable Aircraft structure through eXtended, Integrated, and Mature nUmerical Sizing (MAAXIMUS)

Start date: Apr 1, 2008, End date: Sep 30, 2016,

Even though composite materials are more and more used in modern airframes, many significant improvements are still achievable. Firstly, the substitution of the assembly of many small composite parts by a single one-shot large part provides additional weight reduction. Secondly, the final assembly line process must be adapted to composite properties (lack of ductility, stiffness). Thirdly, if the ...
Read Project

 60

 FINISHED 

Thermal Overall Integrated Conception of Aircraft (TOICA)

Start date: Sep 1, 2013, End date: Sep 30, 2016,

Thermal behaviour of aircraft has recently become a crucial subject due to many factors: increasing number of complex systems required by modern, more electric, commercial aircraft, the introduction of hotter engines with higher by-pass ratios, the increased use of composite material in aircraft structures, or the confinement of highly dissipative equipment and systems in smaller areas to earn spa ...
Read Project

 34

 FINISHED 

Enabling Next Generation Composite Manufacturing by In-Situ Structural Evaluation and Process Adjustment (ECOMISE)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

Within current composite part development and manufacturing processes a disproportional high effort is implied in order to find optimal process parameters and to meet required qualities and tolerances of high performance light weight structures.The ECOMISE project proposes a breakthrough production system to enable next generation of thermoset composite manufacturing and post-processing. Within th ...
Read Project

 11

 FINISHED 

Envisioning an advanced ICT-supported build-up of manufacturing skills for the Factories of the Future (ManuSkills)

Start date: Sep 1, 2013, End date: Dec 31, 2015,

The main aim of ManuSkills is to study the use of enhanced ICT-based technologies and training methodologies to facilitate an increase of young talent interest in manufacturing and to support their training of new manufacturing skills.The project will experiment with a wide range of innovative delivery mechanisms such as serious games and teaching factory, supported by the use of social media augm ...
Read Project

 8

 FINISHED 

Simulation Platform for Non Destructive Evaluation of Structures and Materials (SIMPOSIUM)

Start date: Sep 1, 2011, End date: Dec 31, 2014,

In all industrial sectors, Non Destructive Evaluation techniques play a critical role for ensuring structures reliability, plant safety and increasingly also for ensuring quality and efficiency of products and processes. The emerging use of numerical simulation is a major trend in the field with tremendous potential benefits in terms of costs reduction, enhanced diagnosis reliability and consequen ...
Read Project

 20

 FINISHED 

Combined Model-based Analysis and Testing of Embedded Systems (MBAT)

Start date: Nov 1, 2011, End date: Dec 31, 2014,

"One of the most important strategic sectors in which Europe is developing, integrating and delivering high-quality products is the transportation domain. Here, high-class safety-related products as e.g. airplanes, cars and trains have a huge market impact. More and more of the market value of these vehicles is gained by embedded systems inside these products, and the number and importance of thes ...
Read Project

 42

 FINISHED 

Big Data Public Private Forum (BIG)

Start date: Sep 1, 2012, End date: Oct 31, 2014,

Big Data is an emerging field where innovative technology offers alternatives to resolve the inherent problems that appear when working with huge amounts of data, providing new ways to reuse and extract value from information. Three main dimensions characterize Big Data: huge variety of data format, often time-sensitive and large.Big Data offers tremendous untapped potential value for many sectors ...
Read Project

 7

 FINISHED 

LOD2 - Creating Knowledge out of Interlinked Data (LOD2)

Start date: Sep 1, 2010, End date: Aug 31, 2014,

Description Creating Knowledge out of Interlinked Data - Research and development of novel, innovative Sematic Data Web technologies. - Expansion and integration of openly accessible and interlinked data on the web. - Adoption and implementation of Linked Data for media, enterprise and government.LOD2 will integrate and syndicate linked d ...
Read Project

 17

 FINISHED 

HIRF Synthetic Environment (HIRF SE)

Start date: Dec 1, 2008, End date: May 31, 2013,

"The HIRF SE research project has the goal of providing the aeronautics industry with a framework which can be used during the development phase to mitigate the EM aspects. In addition it will provide a considerable reduction in the certification/qualification tests required on air vehicle. The HIRF SE main objectives can be summarized by the two followings items: • Full validated and integrated s ...
Read Project

 45

 FINISHED 

Collaborative & Robust Engineering using Simulation Capability Enabling Next Design Optimisation (CRESCENDO)

Start date: May 1, 2009, End date: Oct 31, 2012,

"The IMG4 project CRESCENDO addresses the Vision 2020 objectives for the aeronautical industry by contributing significantly to the fulfilment of three specific targets of the aeronautical industry’s Strategic Research Agenda. CRESCENDO will develop the foundations for the Behavioural Digital Aircraft (BDA), taking experience and results from VIVACE, and integrating these into a federative system ...
Read Project

 59

 FINISHED 

Cost-Efficient Methods and Processes for Safety Relevant Embedded Systems (CESAR)

Start date: Mar 1, 2009, End date: Jun 30, 2012,

"The embedded safety-critical systems design and development industry is facing increasing complexity and variety of systems and devices, coupled with increasing regulatory constraints while costs, performances and time to market are constantly challenged.This has led to a profusion of enablers (new processes, methods and tools), which are neither integrated nor interoperable because they have bee ...
Read Project

 54

 FINISHED 

ActionPlanT - The European ICT Forum for Factories of the Future (ActionPlanT)

Start date: Jun 1, 2010, End date: May 31, 2012,

ICT plays a multifaceted role in all major European industrial sectors and its contribution to the manufacturing sector has become paramount over the last few years. Quite undeniably, ICT will become increasingly intertwined with Factories of the Future and will be seen developing efficient business processes through dynamically evolving business models. Although Europe has been investing in the e ...
Read Project

 9

 FINISHED 

"OPARUS (Open Architecture for UAV-based Surveillance System) (topic : SEC-2009.3.4.1 Continuity, coverage, performances, secure datalink)" (OPARUS)

Start date: Sep 1, 2010, End date: May 31, 2012,

"The goal of this project is to elaborate an open architecture for the operation of unmanned air-to-ground wide area land and sea border surveillance platforms in Europe. This architecture is based on analysis of concepts and scenarios for UAV-based aerial surveillance of European borders. It takes into account the emerging legislation for insertion of UAS into controlled civil airspace. The techn ...
Read Project

 14