Search for European Projects

16 European Projects Found

Searched on 125080 European Projects

 FINISHED 

DRiving InnoVation in crisis management for European Resilience (DRIVER)

Start date: May 1, 2014, End date: Oct 31, 2018,

DRIVER starts from the experience that neither successful R&D nor strong end-user demand always lead to innovation in the Crisis Management (CM) domain. This is a problem since as societies become more complex, increasing scope and unpredictability of potential crises and faster dynamics of major incidents put increasingly stringent demands on CM. European CM capabilities already constitute a matu ...
Read Project

 38

 FINISHED 

All-in-one manufacturing platform for system in package and micromechatronic systems (NextFactory)

Start date: Sep 1, 2013, End date: Aug 31, 2017,

The mission of the NextFactory project is to develop and validate a new type of all-in-one manufacturing technology combining, for the first time, in a single piece of equipment, 3D freeform printing and ultra-precision 3D assembly. This highly flexible and scalable facility will empower microsystem manufacturers - and in particular SMEs - to effectively produce highly miniaturised Smart Products- ...
Read Project

 11

 FINISHED 

European Control System Security Incident Analysis Network (ECOSSIAN)

Start date: Jun 1, 2014, End date: May 31, 2017,

The protection of critical infrastructures increasingly demands solutions which support incident detection and management at the levels of individual CI, across CIs which are depending on each other, and across borders. An approach is required which really integrates functionalities across all these levels. Cooperation of privately operated CIs and public bodies (governments and EU) is difficult b ...
Read Project

 22

 FINISHED 

Enhanced Lightweight Design (ENLIGHT)

Start date: Oct 1, 2012, End date: Sep 30, 2016,

Lightweight materials such as carbon-fibre reinforced plastics have been used up to now mostly in high-performance cars with relatively high cost & low production volumes. Instead the electric cars of the future require lightweight solutions that not only enable specific design requirements to be respected but are also cost effective and sustainable throughout their lifecycle.ENLIGHT aims to accel ...
Read Project

 22

 FINISHED 

"High Efficient, Single-Use-Bioreactor simulating mammalian tissue conditions for expression and proliferation" (HESUB)

Start date: May 1, 2013, End date: Apr 30, 2016,

A unique combination of earlier EU funded projects allow four research SME´s to create a combined most visionary and innovative product for improved health. There is a strategic decision from pharmaceutical companies and hospitals for:1. continues expressing of biologicals to fulfill the expectation to “personalized medicine” and 2. proliferation of cells to support therapeutic applications and 3. ...
Read Project

 5

 FINISHED 

Enhancing resource Uptake from Roots under stress in cereal crops (EUROOT)

Start date: Jan 1, 2012, End date: Dec 31, 2015,

The overall goal of EURoot is to help farmers to face both climate change, which is expected to result in increasingly uneven rainfall, and meet the societal demand for sustainable agriculture with reduced use of water and fertilizers. EURoot objective is to enhance the cereal plant capability to acquire water and nutrients through their roots and maintain growth and performance under stress condi ...
Read Project

 20

 FINISHED 

Bioreactor-based, clinically oriented manufacturing of engineered tissues (BIO-COMET)

Start date: Dec 1, 2011, End date: Nov 30, 2015,

Despite significant achievements in the field of regenerative medicine and the enormous potential for engineered tissue products, significant hurdles have prevented cellular therapies from gaining wide-spread clinical adoption. Manufacturing related issues have been proposed as key challenges to be addressed for the translation of regenerative therapies to the clinic and the successful commerciali ...
Read Project

 9

 FINISHED 

Development of adaptive ProductioN systems for Eco-efficient firing processes (DAPhNE)

Start date: Oct 1, 2012, End date: Sep 30, 2015,

The overall scope of the DAPhNE project is to develop and demonstrate a package of integrated solutions for energy intensive processes (ceramics, cement and glass), based on tuning micro-wave technologies to the material characteristics and on intelligent control systems, to provide real time information about the energy consumption as well as the product quality.Microwave heating is now a well e ...
Read Project

 18

 FINISHED 

Damage risk assessment, economic impact and mitigation strategies for sustainable preservation of cultural heritage in the times of climate change (CLIMATE FOR CULTURE)

Start date: Nov 1, 2009, End date: Oct 31, 2014,

Climate change is one of the most critical global challenges of our time which also threatens cultural heritage. As a non-renewable important resource to the European identity, sustainable adaptation strategies are required for long term preservation. For this purpose and for the first time ever, the CLIMATE FOR CULTURE project will couple completely new high resolution (10x10km) climate change ev ...
Read Project

 28

 FINISHED 

New tailor-made PHB-based nanocomposites for high performance applications produced from environmentally friendly production routes (BUGWORKERS)

Start date: Jul 1, 2010, End date: Jun 30, 2014,

The project aims to develop a new cost-competitive and environmentally friendly bionanocomposite material based on the combination of a polyhydroxybutyrate (PHB) matrix with new chemical, structure produced by new fermentation culture technology with two types of nanofibres,cellulose whiskers and lignin-based, in order to have a true alternative to engineering materials in two main sectors: househ ...
Read Project

 15

 FINISHED 

Internet of Things Architecture (IoT-A)

Start date: Sep 1, 2010, End date: Nov 30, 2013,

Description The Lighthouse Project IoT-A proposes the creation of an architectural reference model for the IoT as well as the definition of a set of key building blocks to lay the foundation for a ubiquitous IoT.There has been much hype about the “Internet of Things”. The idea of a globally interconnected continuum of devices, objects and ...
Read Project

 20

 FINISHED 

Models and generic interfaces for easy and safe Battery insertion and removal in electric vehicles (EASYBAT)

Start date: Jan 1, 2011, End date: Jun 30, 2013,

"“The Battery is the Car”. New traction battery packs make the fully electric & plug-in vehicles more and more capable. Their share of the price of the car is set to become even more dominant. Factors driving this include the strident demand for better car range. Battery packs increasingly incorporate electronics for safety and power conversion. The integration of these new complex battery packs p ...
Read Project

 11

 FINISHED 

Friendly Intelligent Energy Management System for Existing Residential Buildings (FIEMSER)

Start date: Feb 1, 2010, End date: Apr 30, 2013,

FIEMSER (Friendly Intelligent Energy Management System for Residential Building) addresses the need of achieving energy positive buildings through solutions based on a rational consumption of energy, local generation and an increase in the consciousness of the building owners towards their energy consumption habits.The main goal of FIEMSER matches with the challenges of the Call by aiming to build ...
Read Project

 8

 FINISHED 

Modeling, Control and Management of Thermal Effects in Electronic Circuits of the Future (THERMINATOR)

Start date: Jan 1, 2010, End date: Dec 31, 2012,

Electronic devices of the latest generations, being those integrated circuits or discrete components, are often required to operate in harsh environmental conditions, where the temperature may reach over hundred degrees centigrade. Obviously, this has negative impact on several parameters of the electronic devices, ranging from slow-down and transient, recoverable errors to permanent failures and ...
Read Project

 21

 FINISHED 

High Power Electric propulsion: a Roadmap for the future (HiPER)

Start date: Oct 1, 2008, End date: Jan 31, 2012,

The main objective of the HiPER project is to initiate technological and programmatic consolidation in the development of innovative electric propulsion technologies (and of the related power generation) to fulfill future European space transportation needs. The objective will be pursued by conceiving and substantiating a long term vision for European space transportation and exploration, conside ...
Read Project

 21

 FINISHED 

Best Practices for IPR and Technology Transfer in Nanotechnology Developments (Nano2Market)

Start date: Jul 1, 2009, End date: Aug 31, 2010,

The lack of models for technology transfer at nanotechnology developments is of increasing concern for the sector. This CSA will fulfil this gap providing guidelines for technology transfer and rules for IPR and license agreements in nanotechnology developments. To achieve these objectives, a consortium is formed by: 1) Key European research centres in different areas of nano and converging techno ...
Read Project

 10