Search for European Projects

9 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Plug-and-Play product and process innovation for Energy-efficient building deep renovation (P2Endure)

Start date: Sep 1, 2016, End date: Aug 31, 2020,

P2Endure aims to provide scalable, adaptable and ready-to-implement prefabricated Plug-and-Play (PnP) systems for deep renovation of building envelopes and technical systems. These innovative solutions will be used to transform non-functioning or sub-optimal public and historic buildings into dwellings, and applicable for the widest range of building typologies, i.e. public buildings, residential ...
Read Project

 16

 FINISHED 

Development of innovative lightweight and highly insulating energy efficient components and associated enabling materials for cost-effective retrofitting and new construction of curtain wall facades (EENSULATE)

Start date: Aug 1, 2016, End date: Jan 31, 2020,

We will validate an affordable (28% reduction of total costs) and lightweight (35% weight reduction) solution for envelope insulation to bring existing curtain wall buildings to “nearly zero energy” standards while complying with the structural limits of the original building structure and national building codes. Two key commercial insulating products:• Highly insulating mono-component and enviro ...
Read Project

 14

 FINISHED 

New Easy to Install and Manufacture PRE-Fabricated Modules Supported by a BIM based Integrated Design ProceSS (IMPRESS)

Start date: Jun 1, 2015, End date: Nov 30, 2018,

IMPRESS will develop three different prefabricated panels for buildings: (i) a polyurethane based insulated panel with improved thermal performance and light radiation and (ii) a thin, lightweight pre-cast concrete sandwich panel, with optimum thermal and weathering resistance, both of which are suitable for overcladding; (iii) a lightweight pre-cast concrete sandwich panel incorporating Phase Ch ...
Read Project

 16

 FINISHED 

Holistic and Optimized Life-cycle Integrated SupporT for Energy-Efficient building design and Construction (HOLISTEEC)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

Despite recent evolutions of tools/practices in the Architecture Engineering, Construction and Facility Management have already resulted in considerable advances, some limitations remain, related to the complexity and variability of building life cycles, addressing building end user awareness and participation, lack of new business models, life cycle fragmentation, limited interoperability of the ...
Read Project

 21

 FINISHED 

Affordable and Adaptable Public Buildings through Energy Efficient Retrofitting (A2PBEER)

Start date: Sep 1, 2013, End date: Aug 31, 2017,

Buildings consume about 40% of total final energy in Europe, and those built before 1980 represent 95% of this energy consumption. The low renovation rate of building stock (1% per year) means that boosting energy efficient buildings’ retrofitting is the only way to reach EU’s “20-20-20” targets. The higher impact will be achieved through interventions in non-residential buildings, as their energy ...
Read Project

 22

 FINISHED 

Cost-effective and sustainable Bio-Renewable Indoor Materials with high potential for customisation and creative design in Energy Efficient buildings (BRIMEE)

Start date: Jul 1, 2013, End date: Jun 30, 2017,

"The challenge of today lies in the accomplishment of sustainable and low-energy buildings, which can combine at the same time the thermal insulation properties with healthy, comfortable, accessible and safe indoor environment. Reduction of the energy demand through the use of insulating materials still remains a challenge for European architects and building designers as well as materials produce ...
Read Project

 15

 FINISHED 

FOREST BASED COMPOSITES FOR FAÇADES AND INTERIOR PARTITIONS TO IMPROVE INDOOR AIR QUALITY IN NEW BUILDS AND RESTORATION (OSIRYS)

Start date: Jun 1, 2013, End date: May 31, 2017,

Indoor Air Quality and emissions from building materials have been over the last decades a major challenge for scientists, industry and consumers. Traditional construction materials contribute to contaminants such as VOCs, formaldehyde, particulates and fibres. However, new eco-innovative building materials are able to provide a healthier indoor environment both by substituting source of contamina ...
Read Project

 22

 FINISHED 

RetroKit - Toolboxes for systemic retrofitting (RETROKIT)

Start date: Sep 1, 2012, End date: Aug 31, 2016,

RetroKit will develop and demonstrate multifunctional, modular, low cost and easy to install prefabricated modules, integrating efficient energy use systems and RES for systemic retrofitting of residential buildings. Aiming at external retrofitting concepts with an integration of internal renovation aspects, semi-prefabricated technological solutions will be clustered in a “RetroKit Toolbox” supp ...
Read Project

 20

 FINISHED 

WISER – the energy saving and burglar proof window that breathes for enhanced indoor comfort (WISER)

Start date: Dec 1, 2015, End date: May 31, 2016,

BGTEC is a Polish SME, active since 1996 in the production of customised windows and fenestration products for high-end clients; our current niche market consists of new constructions and deep retrofitting projects, in particular nearly zero energy single-family houses, villas and passive houses. As a result of our continuous product development efforts to fulfil market demand, in 2012 we have con ...
Read Project

 1