Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 
"Invasive fungal disease (IFD) is a leading cause of morbidity and mortality in the growing number of immunocompromised individuals, including particularly cancer patients, and bone-marrow or organ transplant recipients. The majority of IFD events are still caused by Candida and Aspergillus species, but there is an increasing incidence of resistant or previously uncommon moulds, yeasts and Zygomyc ...
Read Project

 6

 FINISHED 
"MariaBox will develop a wireless marine environment analysis device for monitoring chemical and biological pollutants while installed into a buoy, a maritime means of transport or a mooring. The device, based on novel biosensors, will be of high-sensitivity, portable and capable of repeating measurements over a long time, allowing permanent deployment at sea. The word “MARIA” is the plural of the ...
Read Project

 13

 FINISHED 
The AQUAVALENS consortium has brought together SMEs, Industries, Universities and Research Institutes with the mission of protecting the health of European Citizens from contaminated drinking water and water used in food processing. We will achieve this by developing sustainable technologies to enable water system managers whether in large or small water systems or within food growers or manufactu ...
Read Project

 43

 FINISHED 
ECRIN is a distributed ESFRI-roadmap pan-European infrastructure designed to support multinational clinical research, making Europe a single area for clinical studies, taking advantage of its population size to access patients. Servicing multinational trials started during its preparatory phase, and it now applies for an ERIC status by 2011. The ERIC budget will be restricted to core activities re ...
Read Project

 48

 FINISHED 

SUSTAINABLE NANOTECHNOLOGIES (SUN)

Start date: Oct 1, 2013, End date: Mar 31, 2017,

SUN (Sustainable Nanotechnologies) is the first project addressing the entire lifecycle of nanotechnologies to ensure holistic nanosafety evaluation and incorporate the results into tools and guidelines for sustainable manufacturing, easily accessible by industries, regulators and other stakeholders. The project will incorporate scientific findings from over 30 European projects, national and inte ...
Read Project

 38

 FINISHED 
The PELARS project generates, analyzes, uses and provides feedback for analytics derived from hands-on, project-based and experiential learning scenarios. The project produces and evaluates technology designs for analytic data generation for constructivist learning scenarios in Science, Technology, Engineering and Math (STEM) topics, including: technology solutions, infrastructure, activities, ass ...
Read Project

 12

 FINISHED 
"Cystic Fibrosis (CF) is a chronically debilitating and life threatening medical condition. Respiratory insufficiency and complications of chronic lung infection lead to long term reduction in quality of life and health and even to premature death. Chronic bacterial infections with Pseudomonas aeruginosa (PA), Staphylococcus aureus and Haemophilus influezae are typical for CF and repeated courses ...
Read Project

 10

 FINISHED 
Cell-based immunotherapies are a modern treatment approach holding promise to utilize nature’s own power to treat diseases that develop on the ground of immune system aberrations. Such diseases include cancer that develops and progresses via immune escape and on the other hand rejection of transplanted organs that need to be accepted by the immune system. Because the functions of distinct immune c ...
Read Project

 5

 FINISHED 
Future advancements in ICT domain are closely linked to the understanding about how multi-level complex systems function. Indeed, multi-level dependencies may amplify cascade failures or make more sudden the collapse of the entire system. Recent large-scale blackouts resulting from cascades in the power-grid coupled to the control communication system witness this point very clearly. A better unde ...
Read Project

 24

 FINISHED 

Preparing NUGENIA for HORIZON2020 (NUGENIA-PLUS)

Start date: Sep 1, 2013, End date: Sep 30, 2016,

Preparing NUGENIA for HORIZON 2020The objective of the NUGENIA+ project is to support the NUGENIA Association in its role to coordinate and integrate European research on safety of the Gen II and III nuclear installations in order to better ensure their safe long term operation, integrating private and public efforts, and initiating international collaboration that will create added value in its a ...
Read Project

 52

 FINISHED 
CONCORD advances European Future Internet research and innovation by supporting the successful implementation of the European Commission's Future Internet Public Private Partnership (FI-PPP) Programme. As a Programme Facilitation and Support Action, CONCORD coordinates and facilitates the alignment of FI-PPP activities to ensure the relevance, rigor and robustness of the emerging Future Internet ( ...
Read Project

 10

 FINISHED 
Though survival of children with acute lymphoblastic leukaemia (ALL) has improved, relapse remains a leading cause of mortality in childhood cancer. Given the rarity of the disease, only a large international cooperative group can recruit sufficient patients for prospective studies with specific questions in biologic subgroups. Under the umbrella of the I-BFM SG all relevant mainly European study ...
Read Project

 29

 FINISHED 
Existing test standards for biomass room heating appliances (pellet and firewood stoves, and inset appliances) have supported technology development tremendously in past decades. Due to today’s changing and more demanding requirements, however, there is the obvious need for refined testing procedures in order to differentiate between poor and excellent products. Such differentiation should take in ...
Read Project

 15

 FINISHED 

Framework for a EU-wide Audiovisual Orphan Works Registry (FORWARD)

Start date: Jul 1, 2013, End date: Jun 30, 2016,

Description Framework for a EU-wide Audiovisual Orphan Works Registry.The assessment of the rights status for audiovisual works is critical for their re-use in commercial distribution or for cultural and educational purposes, for example in the context of large digitization projects. Unfortunately, the rights status of such works is often ...
Read Project

 13

 FINISHED 

PRACE - Third Implementation Phase Project (PRACE-3IP)

Start date: Jul 1, 2012, End date: Jun 30, 2016,

PRACE-3IP supports the accelerated implementation of the pan-European HPC Research Infrastructure (RI) created in April 2010. It continues, complements, and extends the work of the PRACE-1IP and -2IP projects.PRACE-3IP addresses the computational and simulation needs of European scientific communities and of industry to keep them at the forefront of discovery. Our vision is the formation of an int ...
Read Project

 48

 FINISHED 
We propose to establish a special detector-training network aiming to extend the application of cutting-edge technologies developed in High Energy Physics (HEP) to other domains, such as medical imaging. A large number of detector techniques, developed for and used in particle physics experiments, has been transferred successfully to other fields. Most prominent are their applications in medicine, ...
Read Project

 11

 FINISHED 
The objective of KYROBIO project is to broaden the toolbox of single enantiomer chiral chemicals that are produced by industry in Europe using biotechnological routes. The main target is applications of lyase enzymes to selectively synthesize molecules with multiple chiral centres applying enzymatic carbon-carbon and carbon-nitrogen bond formation as the key technical platforms. We will then apply ...
Read Project

 18

 FINISHED 
RationaleThe inability of pre-clinical studies to predict clinical efficacy is a major bottleneck in drug development. In severe asthma this bottleneck results from: a lack of useful and validated biomarkers, underperforming pre-clinical models, inadequate and incomplete sub-phenotyping, and insufficient disease understanding.HypothesisThe use of biomarker profiles comprised of various types of hi ...
Read Project

 42

 FINISHED 
This proposal details activities that will ensure the continued enhancement and ongoing operation of the leading-edge GÉANT network, supporting a range of network and added-value services, targeted at users across the GÉANT service area.In the area of multi-domain network service operation, GN3plus plans to deliver fast, efficient provisioning of advanced services, develop operational support acro ...
Read Project

 72

 FINISHED 
WoodSonics responds to a need in the EU sawmill sector to improve competitiveness by implementing machine strength grading of structural timber at SME sawmills. In the context of a serious crisis in the construction sector, significant savings in production costs and the optimisation of yield through the use of machine strength grading systems can help SME sawmills survive. However, the current co ...
Read Project

 9

 FINISHED 

Arctic Climate Change, Economy and Society (ACCESS)

Start date: Mar 1, 2011, End date: Feb 28, 2015,

The Arctic is engaged in a deep climatic evolution. This evolution is quite predictable at short (year) and longer scales (several decades), but it is the decadal intermediate scale that is the most difficult to predict. This is because the natural variability of the system is large and dominant at this scale, and the system is highly non linear due to positive and negative feedback between sea ic ...
Read Project

 29

 FINISHED 
VERTIGEEN addresses a need identified by olive sector SME-Associations for the rapid and reliable on-site detection and quantification of the Verticillium dahliae fungus in soil and plant samples. The increasing frequency and severity of this pathogen in most EU olive growing areas has made it the most serious problem of commercial olive plantations.For an estimated commercial price of €1,000/devi ...
Read Project

 11

 FINISHED 

Collective Cognitive Robots (CoCoRo)

Start date: Apr 1, 2011, End date: Sep 30, 2014,

Description The CoCoRo project aims at developing a swarm of autonomous underwater vehicles (AUVs) that are able to interact with each other and which can balance tasks such as ecological monitoring, searching, maintaining, exploring and harvesting resources in underwater habitats. The swarm will maintain swarm integrity under conditions of ...
Read Project

 5

 FINISHED 
SOLIBAM will develop specific and novel breeding approaches integrated with management practices to improve the performance, quality, sustainability and stability of crops adapted to organic and low-input systems, in their diversity in Europe and taking into account small-scale farms in Africa. SOLIBAM will: 1. Identify traits specific for adaptation to low-input/organic conditions over a wide ran ...
Read Project

 24

 FINISHED 
InSOTEC aims at identifying the main socio-political challenges for implementing geological disposal and their interplay with technical challenges. It will furthermore provide the IGD-TP with concrete suggestions on how to address these entangled socio-technical challenges.The biggest challenge today lies in adapting the generic concept of geological disposal to the real world environment (both na ...
Read Project

 17

 FINISHED 
"The proposed Coordination and support actions (Coordinating, CSA) has the overall objective to disseminate state-of-the-art research results in food safety and quality topics through a series of symposia, expert working group meetings, an online platform with best practise examples and coordination of cooperation and a plan for the preparation of future activities. In addition to the aim of disse ...
Read Project

 36

 FINISHED 

Nanomaterials and nanotechnology for advanced photovoltaics (NanoPV)

Start date: Mar 1, 2011, End date: Feb 28, 2014,

The NanoPV project aims at making a breakthrough step-change in photovoltaics by the removal of a set of bottlenecks which have been identified to block the application of nanostructures for high-efficiency, low-cost solar cells. The bottlenecks arise from the present lack of up-scalable processes that can meet the needs for nanomaterials in PV applications, and the lack of relevant equipment and ...
Read Project

 12

 FINISHED 

Long-term performance of Engineered Barrier Systems (EBS) (PEBS)

Start date: Mar 1, 2010, End date: Feb 28, 2014,

The main aim of the project PEBS (Long-term Performance of the Engineered Barrier System) is to evaluate the sealing and barrier performance of the EBS with time, through development of a comprehensive approach involving experiments, model development and consideration of the potential impacts on long-term safety functions. The experiments and models cover the full range of conditions from initial ...
Read Project

 18

 FINISHED 
"MINOTAURUS will deliver innovative bio-processes (bioaugmentation, enzyme technology, rhizoremediation with halophytes, and bioelectrochemical remediation), which are all based on the concept of IMMOBILIZATION OF BIOCATALYSTS (microorganisms and enzymes), to eliminate emerging and classic organic pollutants. The immobilization-based technologies will be applied to engineered (ex-situ) and natural ...
Read Project

 16

 FINISHED 
VERITAS aims to develop, validate and assess an open framework for built-in accessibility support at all stages of ICT and non-ICT product development, including specification, design, development and testing. The goal is to introduce simulation-based and VR testing at all stages of product design and development into the automotive, smart living spaces, workplace, infotainment and personal health ...
Read Project

 33

 FINISHED 

PRACE - First Implementation Phase Project (PRACE-1IP)

Start date: Jul 1, 2010, End date: Dec 31, 2013,

Large scale simulations are the third pillar of science today alongside theory and experiment. They produce scientific insights, technological advances, and solve problems in many fields of society. Their tools are high-end computers and effective software. PRACE, the Partnership for Advanced Computing, has been created as a not for profit association in May 2010 as a permanent pan-European High P ...
Read Project

 46

 FINISHED 

European Clearing House for Open Robotics Development (ECHORD)

Start date: Jan 1, 2009, End date: Dec 31, 2013,

Description Strengthening the knowledge transfer between scientific research and industry in robotics and stimulating their cooperation In Europe the robotics industry is strong, but still fragmented and dispersed. The objective of ECHORD is to provide new opportunities for coordinated and target- ...
Read Project

 105

 FINISHED 
The objective of this proposal is the creation of a leading edge network supporting a much enhanced range of both network and added value services targeted at end-users across the GÉANT service area. A principal goal will be to create a portfolio of seamless multi-domain services. In contrast to its predecessor, GN2, much more emphasis is placed on service development and service introduction.Init ...
Read Project

 35

 FINISHED 
The approach of AFORE project is to develop novel, industrially adaptable and techno-economically viable bio-based solutions for the separation, fractionation, and primary upgrading of green chemicals from forest residues, wood chips, and chemical pulping liquors to be used as starting materials for current and novel value-added applications. It is targeted that by this means European forest and p ...
Read Project

 22

 FINISHED 
Amputation of a limb is a surgical intervention used as a last resort to remove irreparably damaged, diseased, or congenitally malformed limbs where retention of the limb is a threat to the well-being of the individual. The procedure traumatically alters the body image, but often leaves sensations that refer to the missing body part, the phantom limb. In 50-80% of cases, these sensations are painf ...
Read Project

 10

 FINISHED 
The NET-EUCEN project will create, animate and manage a working network of stakeholders in the Governance and Policy Modelling domains belonging to all the European countries and with relevant knowledge of massive on-line service fruition and eInclusion policies and interests, thus covering the whole supply chain of the Service for Users (S4U). The project will address the following specific objec ...
Read Project

 22

 FINISHED 

Breakthrough in European Ship and Shipbuilding Technologies (BESST)

Start date: Sep 1, 2009, End date: Feb 28, 2013,

"Initiated by EUROYARDS, BESST aims to achieve a breakthrough in competitiveness, environmentally friendliness and safety of EU built ships. Focusing on passenger ships, ferries and mega-yachts, the results will to a large extend be applicable also to other ships. A holistic life cycle performance assessment on ship level will guide the technical developments on system level, clustered in System G ...
Read Project

 70

 FINISHED 
The proposed project aims at creating new high precision manufacturing technologies to respond cost-effectively and eco-friendly to the mass customization paradigm within the production of complex shape micro parts, embedded systems and miniaturized products at micro/meso-scale level (from 10 to 10.000 micron range). The main objective of Integ-micro is the research and development of new hybrid a ...
Read Project

 20

 FINISHED 
"With oil reserves diminishing and the effects of industrial emissions on global climate, there is a need for renewable carbon-neutral industrial feedstocks. First generation biorefineries, producing biofuels and bioplastics by the fermentation of sugar or starch, are seeing a rapid expansion and are adding stress to food supplies. A more sustainable option is to use plant biomass from agricultura ...
Read Project

 17

 FINISHED 

ArtistDesign – Design for Embedded Systems (ArtistDesign)

Start date: Jan 1, 2008, End date: Mar 31, 2012,

The ArtistDesign NoE is the visible result of the ongoing integration of a community, that emerged through the Artist FP5 Accompanying Measure and that was organised through the Artist2 FP6 NoE.The central objective for ArtistDesign is to build on existing structures and links forged in Artist2, to become a virtual Center of Excellence in Embedded Systems Design. This will be mainly achieved throu ...
Read Project

 38