Search for European Projects

11 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Fully recyclable 100% PET package for food contact with O2 barrier, improved transparency and low CO2 footprint (GREEN PACK)

Start date: Dec 1, 2013, End date: Nov 30, 2016,

"The main scientific and technological objective of the current project is: producing prototypes of fully recyclable PET trays for food preservation by using recycled PET (RPET). The proposed idea will be able to give a solution to this problem by providing a mono-material tray in virgin PET (for food contact) and RPET for the rest of the tray. The necessary barrier properties will be guaranteed b ...
Read Project

 9

 FINISHED 

Sustainable Moulding of Articles from Recycled Tyres (SMART)

Start date: Mar 1, 2012, End date: Apr 30, 2015,

End of Life Tyres represent both a waste problem and a resource opportunity, for both the society and the large recycling trade community. Even though tyres are 100 % recyclable and their chemical and physical properties make them an outstandingly valuable resource, still energy recovery and land filling constitute the greatest share of destination. The tyre recycling sector is constituted by larg ...
Read Project

 10

 FINISHED 

Development of a selective, green solvent-based recovery process for waste polystyrene and polycarbonate (POLY-SOLVE)

Start date: Dec 1, 2011, End date: Nov 30, 2014,

Expanded polystyrene is widely used as packaging for foodstuffs and for shipping. Several hundred thousand tonnes of polystyrene are sent unnecessarily to landfill every year in the UK and Europe, where it does not biodegrade but persists for hundreds of years. Meanwhile, oil-derived feedstocks are being consumed in the production of new polystyrene. Recycling systems for polystyrene are underdev ...
Read Project

 9

 FINISHED 

Development of processes and quality procedures for the valorisation of recycled plastics for food contact applications (SUPERCLEANQ)

Start date: Nov 1, 2011, End date: Oct 31, 2014,

The goals of the SuperCleanQ project are to develop quality control and quality assurance tools and procedures for plastics recycling processes targeted at food contact applications to enable SMEs to conform to Commission Regulation EC 282/2008 on recycled plastic materials and articles intended to come into contact with foods. Thetools will be applied to a new process for the recycling of coloure ...
Read Project

 12

 FINISHED 

An Universal Flexible Low-cost Plumbing and Heating pipe system fully Environment-compatible by using innovative Nanoparticle technology (NanoFlex)

Start date: Nov 1, 2010, End date: Oct 31, 2013,

The building and construction community in Europe includes about 150000 plumbing, heating, ventilation, air conditioning contractor SMEs with 1.2 million employees generating a total turnover of €130Bn. Our community faces the challenges of meeting the growing demand for plastic pipes and the EU Landfill Directive and the revised EU Waste Framework Directive. The polluter-pays principle says that ...
Read Project

 16

 FINISHED 

"IMPROVING PLC PROGRAMMING THROUGH A NEW GRAPHICAL, OBJECT-ORIENTED AND BRAND- INDEPENDENT PROGRAMMING FRAMEWORK" (PLC-PROG)

Start date: Sep 1, 2010, End date: Aug 31, 2013,

"Most Modern automation installations are driven by Programmable Logic Controllers (PLCs). Nowadays, the low level programming languages that have been used for decades, such as Ladder Diagrams (LD), are still being used to develop the new software. Besides, there are ‘hidden’ penalties: PLC software is brand dependent. The solution to this problem has been the adoption of new paradigms that allow ...
Read Project

 12

 FINISHED 

Development of an efficient heating and cooling technology system for rotational moulding, which will –dramatically reduce cycle time, product cost and energy consumption (ROTOFAST)

Start date: Aug 1, 2010, End date: Jul 31, 2013,

Rotational Molding is a very competitive manufacturing method for producing large hollow plastic products. It provides one advantage over other plastic processing technologies: production of seamless articles, with uniform wall thickness and complex shapes for sectors as chemical storage, toys, construction and transports. However this technology has stuck without major innovative improvements in ...
Read Project

 13

 FINISHED 

New manufacturing infrastructure for the production of high quality Natural Fibres (UltraFibre)

Start date: Jan 1, 2010, End date: Dec 31, 2012,

Natural fibres offer a route to the production of sustainable composites, replacing inorganic and petrochemical based fibres with high-embodied energy. One of the main obstacles to the exploitation of natural fibres is the limited consistency of supply, with batch-to-batch variations in quality. Retting – a process whereby plant stems are left to weather in the fields – has been identified as bein ...
Read Project

 14

 FINISHED 

Recycling Thermoset Composites of the SST (EURECOMP)

Start date: May 1, 2009, End date: Jul 31, 2012,

"The goal of this project is to set up a new route to recycle composites, which will decrease the cost of production waste disposal by 50%. The whole composites sector is now aware of the environmental rules about wastes from composites production (directive on End-of-life Vehicles 2000/53/EC or directive 2002/96/EC on Waste Electrical and Electronic Equipment) which apply to their industry. The r ...
Read Project

 13

 FINISHED 

Innovative rotomoulding development to improve cycle times and process efficiency whilst facilitating greater flexibility in product design and integrity for the SME-rotomoulding sector (RotoFlex)

Start date: Jan 1, 2009, End date: Dec 31, 2011,

ROTOFLEX addresses the needs of the Rotational Moulding industry through: · Development of an automated feed system for polymer, additives, and coolants direct to the rotating mould at any point in the cycle. This will allow the production of: multilayer parts for enhanced product performance fibre-reinforced composites and facilitate automatic and controlled internal mould cooling · Decreasin ...
Read Project

 12

 FINISHED 

Novel Injection Moulding Processing for the Production of Low Density Foams based on Innovative Granule Technology (LIGHT-FOAM)

Start date: Dec 1, 2008, End date: Nov 30, 2011,

"Our concept is to enable the production of high quality foams from engineering grade thermoplastics using existing injection moulding and extrusion equipment installed in our SME communities. We propose the creation of a novel polymer processing technology. We will develop the ability to foam engineering grade thermoplastics without the need for chemical blowing agents or speciality moulding equi ...
Read Project

 10