Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Advanced Materials technologies to QUADRUPLE the Concentrated Solar Thermal current POWER GENERATION (IN-POWER)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

The benefits of high efficiency concentrated solar power (CSP) and photovoltaic (PV) are well known: environmental protection, economic growth, job creation, energy security. Those technologies can only be applied properly in regions with annual mean radiation values higher than 1750 kWh/m2 per year. CSP has advantages in front of PV: possible 24h continuous electricity production, electricity and ...
Read Project

 11

 FINISHED 

NOVEL, SUSTAINABLE MARINE BIO-SURFACTANT / BIO-EMULSIFIERS FOR COMMERCIAL EXPLOITATION (MARISURF)

Start date: Sep 1, 2015, End date: Aug 31, 2020,

Surfactants and emulsifiers constitute an important class of chemical agents that are widely used in almost every sector of modern industry. The huge market demand is currently met almost exclusively by synthetic, mainly petroleum-based, chemical products, which are usually non-biodegradable and mostly toxic or GM plant based products (used in foods), which are undesirable by some end-users. Their ...
Read Project

 13

 FINISHED 

Microbial Desalination for Low Energy Drinking Water (MIDES)

Start date: Apr 1, 2016, End date: Mar 31, 2020,

Shortage of fresh water has become one of the major challenges for societies all over the world. Water desalination offers an opportunity to significantly increase the freshwater supply for drinking, industrial use and irrigation. All current desalination technologies require significant electrical or thermal energy, with today's Reverse Osmosis (RO) desalination units consuming electric energy of ...
Read Project

 12

 FINISHED 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Start date: Oct 1, 2016, End date: Mar 31, 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Read Project

 15

 FINISHED 

PILOT PLANT PRODUCTION OF CONTROLLED DOPED NANOPOROUS CARBONACEOUS MATERIALS FOR ENERGY AND CATALYSIS APPLICATIONS (POROUS4APP)

Start date: Mar 1, 2016, End date: Feb 29, 2020,

The main idea of POROUS4APP project is based on the fabrication of functional nanoporous carbonaceous materials at pilot plant scale from natural resources (polysaccharide). The process for nanoporous carbon fabrication is already well known as one of the POROUS4APP partner has developed the STARBON® technology at TRL5 which consist of swelling, drying and pyrolysis of natural resources and in thi ...
Read Project

 11

 FINISHED 

Keep the Energy at the right place! (EnergyKeeper)

Start date: Jan 1, 2017, End date: Dec 31, 2019,

Main idea is to allow individual users and urban communities in remote (isolated) areas to benefit from a local low carbon economy.The project will enable the communities and individual users to participate in the smart grid context, it will develop an intelligent storage solution optimizing the communities demand and supply. The solution will be scalable towards size of the community (30-10.000 h ...
Read Project

 10

 FINISHED 

Performance testing, calibration and implementation of a next generation system-of-systems Risk Governance Framework for nanomaterials (caLIBRAte)

Start date: May 1, 2016, End date: Oct 31, 2019,

The objective of the caLIBRAte project is to establish a state-of-the-art versatile Risk Governance framework for assessment and management of human and environmental risks of MN and MN-enabled products. The framework will be a web-based “system-of-systems” linking different models and methods for: 1) screening of apparent and perceived risks and trends in nanotechnology, 2) control banding, quali ...
Read Project

 26

 FINISHED 

Nano-confined photonic system for detection of breast cancer spread to the lymph nodes (HypoSens)

Start date: Nov 1, 2016, End date: Oct 31, 2019,

The Vision of HypoSens is to develop a widely accepted,non-invasive and crucial prognostic tool for breast cancer progression in early stages to help clinicians and specially oncologists to decide about prompt therapy approaches to patients and improve quality of life and expectancy. Our breakthrough research will focus on the development, pre-clinical and clinical validation, and industrial demon ...
Read Project

 9

 FINISHED 

Nanomaterial FAte and Speciation in the Environment (NanoFASE)

Start date: Sep 1, 2015, End date: Aug 31, 2019,

Concept: NanoFASE will deliver an integrated Exposure Assessment Framework, including methods, parameter values, model and guidance that will allow Industry to assess the full diversity of industrial nano-enabled products to a standard acceptable in regulatory registrations. Methods to assess how use phases, waste streams and environmental compartments (air, soil, water biota) act as “reactors” in ...
Read Project

 39

 FINISHED 

Advanced Lithium Sulphur battery for xEV (ALISE)

Start date: Jun 1, 2015, End date: May 31, 2019,

ALISE is a pan European collaboration focused on the development and commercial scale-up of new materials and on the understanding of the electrochemical processes involved in the lithium sulphur technology. It aims to create impact by developing innovative battery technology capable of fulfilling the expected and characteristics from European Automotive Industry needs, European Materials Roadmap, ...
Read Project

 17

 FINISHED 

HIGH SPECIFIC ENERGY ALUMINIUM-ION RECHARGEABLE DECENTRALIZED ELECTRICITY GENERATION SOURCES (ALION)

Start date: Jun 1, 2015, End date: May 31, 2019,

The overall objective of the ALION project is to develop aluminium-ion battery technology for energy storage application indecentralised electricity generation sources. ALION pursues an integral approach comprising electroactive materials based on “rocking chair” mechanism, robust ionic liquid-based electrolytes as well as novel cell and battery concepts, finally resulting in a technology with muc ...
Read Project

 13

 FINISHED 

Laser Multiplexed Biosensor (GLAM)

Start date: May 1, 2015, End date: Apr 30, 2019,

Differential cancer diagnosis takes place daily in clinical settings for a better monitoring of patient responses to existing treatments. However outcome of this diagnosis is today still poor. Moreover, current technology to measure biomarker levels is expensive and sophisticated.Most cancer biomarker analysis use blood or biological tissues as the main source of material. These biopsies must be a ...
Read Project

 10

 FINISHED 

Ecological and Multifunctional Composites for Application in Aircraft Interior and Secondary Structures (ECO-COMPASS)

Start date: Apr 1, 2016, End date: Mar 31, 2019,

Composites are important materials used in aircrafts due to their excellent mechanical properties combined with relatively low weight enabling the reduction of fuel consumption. Expensive carbon fibre reinforced plastics (CFRP) are used in fuselage and wing structures and increasingly replace classic metals. Glass fibre reinforced plastics (GFRP) are mainly used for the interior panels. All these ...
Read Project

 9

 FINISHED 

Erosion and Ice Resistant cOmposite for Severe operating conditions (EIROS)

Start date: Mar 8, 2016, End date: Mar 7, 2019,

In the wind power generation, aerospace and other industry sectors there is an emerging need to operate in the low temperature and highly erosive environments of extreme weather conditions. Such conditions mean current materials either have a very short operational lifetime or demand such significant maintenance as to render many applications either very expensive to operate or in some cases non-v ...
Read Project

 18

 FINISHED 

Developing new therapies for Batten disease (BATCure)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

The goal of BATCure is to advance the development of new therapeutic options for a group of rare lysosomal diseases - neuronal ceroid lipofuscinoses (NCL) or Batten disease. There are > thousand affected across Europe, with a combined incidence of c.1:100 000. The NCLs are devastating and debilitating genetic disorders that mainly affect children, who suffer progressive dementia and motor decline, ...
Read Project

 14

 FINISHED 

Colloidal Iron Oxide Nanoparticles for the REclamation of Toxic Metal Contaminated GROUNDwater Aquifers, Drinking Water Wells, and River Bank Filtrations (REGROUND)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

The main objective of the presented innovation action is the first application and near-market replication of a novel water nanogeotechnology for the immobilization of toxic metals in groundwater aquifers, drinking water wells, and river bank filtration sites. The basic concept of our technology is the creation of an adsorptive in situ barrier for the immobilization of toxic metal contaminations. ...
Read Project

 8

 FINISHED 

Intensified by Design® for the intensification of processes involving solids handling (IbD)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

IbD® will create a holistic platform for facilitating process intensification in processes in which solids are an intrinsic part, the cornerstone of which will be an intensified-by-design® (IbD). The IbD approach is hinged on the use of robust data about a process to ‘redesign’, modify, adapt and alter that process in a continuous, intensified system, and will be the new paradigm in the intensific ...
Read Project

 23

 FINISHED 

Hybrid AIRcraft seating requirement specification and Design (HAIRD)

Start date: Jan 1, 2017, End date: Dec 31, 2017,

HAIRD project aims to deliver a new design for a next generation aircraft seating which is comfortable,light-weight, fast to disassemble, easy to dismantle, cost efficient to produce, highly recyclable and reliable in structural integrity. Within the HAIRD project a new mono-materials cushions will be developed to improve the easy-recyclability and the cost production. Topological and geometrical ...
Read Project

 1

 FINISHED 

Re-use of Thermoplastic Composite (RESET)

Start date: Jan 1, 2016, End date: Dec 31, 2017,

Current European policies plead for new technologies capable to implement feasible processes for recycling of products in their end of life cycle. Within this framework the re-use of thermoplastic composites, is a recurrent topic within the aircraft manufacturing industry which needs a suitable solution for the high performance thermoplastic composites once the craft is dismantled. PEEK (Polyether ...
Read Project

 2

 FINISHED 

Bringing innovAtion by Scaling up nanoMATerials and Inks for printing (BASMATI)

Start date: Jan 1, 2015, End date: Dec 31, 2017,

The BASMATI project will address the development of active nanomaterial and electrochemical inks for printing technologies such as screen and inkjet printing. The ink formulations will be tested on a case study through printing of a thin film battery. The general objective of the project is to scale-up the ink formulations to pilot line ensuring large volume fabrication of new products with improv ...
Read Project

 11

 FINISHED 

Nano-carbons for versatile power supply modules (NANOCATE)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

The multidisciplinary consortium of the NanoCaTe project will develop a more efficient thermoelectric- and storage material based on nanocarbon (e.g. graphene and CNT) to reclaim waste heat by thermoelectric generators and to storage the energy in super capacitors or secondary batteries for manifold applications like pulsed sensors or mobile electronic devices.The integration of the developed mate ...
Read Project

 14

 FINISHED 

"Lightweight, flexible and smart protective clothing for law enforcement personnel" (SMARTPRO)

Start date: Apr 1, 2014, End date: Sep 30, 2017,

"The concept of the proposed project lies in the development of lightweight and flexible protective clothing, incorporating smart functionalities and designated for law enforcement authorities.Up to now, research on the protective gear of this group concentrated on the ballistic properties of the body armour. However, in spite of the improvements, modern body armours still have some of the same dr ...
Read Project

 10

 FINISHED 

Demonstrating integrated innovative technologies for an optimal and safe closed water cycle in Mediterranean tourist facilities (DEMEAUMED)

Start date: Jan 1, 2014, End date: Jun 30, 2017,

The aim of demEAUmed project is the involvement of industry representatives, stakeholders, policy-makers and diverse technical and scientific experts in demonstrating and promoting innovative technologies, for an optimal and safe closed water cycle in Euro-Mediterranean tourist facilities, leading to their eventual market uptake. A representative resort placed in Catalonia, Spain, is considered as ...
Read Project

 16

 FINISHED 

REtrofitting Solutions and Services for the enhancement of Energy Efficiency in Public Edification (RESSEEPE)

Start date: Jul 1, 2013, End date: Jun 30, 2017,

RESEEPE will bring together design and decision making tools, innovative building fabric manufacturers and a strong demonstration programme to demonstrate the improved building performance through retrofitting. The core idea of the RESSEEPE project is to technically advance, adapt, demonstrate and assess a number of innovative retrofit technologies. Reductions in the area of 50% will be achieved i ...
Read Project

 27

 FINISHED 

Intelligent control of swimming pool disinfection with reduction and treatment of harmful by- products (INTELLIPOOL)

Start date: Sep 1, 2014, End date: May 31, 2017,

The 4 SME Participants in the INTELLIPOOL project – ULTRAAQUA, VES, Electrocell and Swan aim to develop technology solutions to eliminate the severe adverse health effects caused by chlorinated disinfection by-products (DBP) in recreational bathing water facilities and simultaneously save energy, chemicals and water associated with pool water sanitation. We will create a toolbox of analytical/desi ...
Read Project

 10

 FINISHED 

Assessment and mitigation of nano-enabled product risks on human and environmental health: Development of new strategies and creation of a digital guidance tool for nanotech industries (GUIDENANO)

Start date: Nov 1, 2013, End date: Apr 30, 2017,

The main objective of GUIDEnano is to develop innovative methodologies to evaluate and manage human and environmental health risks of nano-enabled products, considering the whole product life cycle. A strategy to identify hot spots for release of nanomaterials (NMs) will be followed by decision trees to guide on the use of (computational) exposure models and, when necessary, design of cost-effecti ...
Read Project

 34

 FINISHED 

Innovative tool to improve risk assessment and promote the safe use of nanomaterials in the textile finishing industry (LIFE_ECO-TEXNANO)

Start date: Oct 1, 2013, End date: Mar 31, 2017,

Background Europe’s textile sector is an important employer, exporter and service provider. Maintaining these benefits requires that the sector evolves to compete in an increasingly sophisticated global market. Innovation can help Europe’s textile sector to succeed, by focusing on higher value-added and sustainable products. Nano materials offer oppo ...
Read Project

 5

 FINISHED 

Biological Foundation for the Safety Classification of Engineered Nanomaterials (ENM): Systems Biology Approaches to Understand Interactions of ENM with Living Organisms and the Environment (NANOSOLUTIONS)

Start date: Apr 1, 2013, End date: Mar 31, 2017,

The main objective of this research proposal is to identify and elaborate those characteristics of ENM that determine their biological hazard potential. This potential includes the ability of ENM to induce damage at the cellular, tissue, or organism levels by interacting with cellular structures leading to impairment of key cellular functions. These adverse effects may be mediated by ENM-induced a ...
Read Project

 40

 FINISHED 

A common European approach to the regulatory testing of nanomaterials (NANOREG)

Start date: Mar 1, 2013, End date: Feb 28, 2017,

The innovative and economic potential of Manufactured Nano Materials (MNMs) is threatened by a limited understanding of the related EHS issues. While toxicity data is continuously becoming available, the relevance to regulators is often unclear or unproven. The shrinking time to market of new MNM drives the need for urgent action by regulators. NANoREG is the first FP7 project to deliver the answe ...
Read Project

 73

 FINISHED 

European development of Superconducting Tapes: integrating novel materials and architectures into cost effective processes for power applications and magnets (EUROTAPES)

Start date: Sep 1, 2012, End date: Feb 28, 2017,

High current coated conductors (CC´s) have high potential for developing electrical power applications and very high field magnets. The key issues for market success are low cost robust processes, high performance and a reliable manufacturing methodology of long length conductors. In recent years EU researchers and companies have made substantial progress towards these goals, based on vacuum (PLD) ...
Read Project

 22

 FINISHED 

COST-EFFECTIVE SENSORS, INTEROPERABLE WITH INTERNATIONAL EXISTING OCEAN OBSERVING SYSTEMS, TO MEET EU POLICIES REQUIREMENTS (COMMON SENSE)

Start date: Nov 1, 2013, End date: Feb 28, 2017,

The COMMON SENSE project will contribute to support the implementation of the Marine Strategy Framework Directive (MSFD) and other EU policies (e.g. Common Fisheries Policy), providing easily usable across several platforms, cost-effective, multi-functional innovative sensors to detect reliable in-situ measurements on key parameters by means of methodological standards. This proposal will focus, b ...
Read Project

 15

 FINISHED 

An innovative bio-economy solution to valorise livestock manure into a range of stabilised soil improving materials for environmental sustainability and economic benefit for European agriculture (BIOECOSIM)

Start date: Oct 1, 2012, End date: Dec 31, 2016,

BioEcoSIM comprises R&D and demonstration of an integrated approach and business model that has wide EU27 applicability in the agriculture sector. The new European Bio-economy Strategy aims to increase the use of bio-based raw materials. Thus, large quantities of fertilisers will be required. Therefore, this project targets to produce sustainable soil improving products that can be easily handled, ...
Read Project

 16

 FINISHED 

New materials for highly efficient and reliable organic solar cells (MATHERO)

Start date: Jan 1, 2014, End date: Dec 31, 2016,

Over the last couple of years, the global research community has been experiencing an Organic Photovoltaics (OPV) boom, nowadays triggering a fast growing interest in industry in this young and disruptive technology, since OPV devices enable various new applications that cannot be served by classical silicon solar cells. In particular, OPV open up new opportunities for design in architecture, e.g. ...
Read Project

 7

 FINISHED 

Development of sustainable textiles against bugs (BETITEX)

Start date: Nov 1, 2013, End date: Oct 31, 2016,

The aim of this project is to create textiles capable of providing the user with protection in front of bugs such as ticks and bedbugs.On the one hand, ticks are important vectors of human and animal diseases, besides causing hurts and irritant bites. Currently, these diseases are more usual than past years, mainly due to: climate change and so continuously new pathogens transmitted by ticks. Tick ...
Read Project

 12

 FINISHED 

ECO-efficient management of WAter in the MAnufacturing industry (ECOWAMA)

Start date: Oct 1, 2012, End date: Sep 30, 2016,

The ECOWAMA Project proposes a new eco-efficient closed cycle management model for the treatment of effluents of the metal and plastic surface processing industry (STM). Such STM waste water is extensively contaminated with oils and greases, organic loading, a salt fraction and especially with heavy metals (e.g. nickel, copper, zinc and others). Hence STM enterprises have high interest on efficien ...
Read Project

 11

 FINISHED 

Nanotechnological Application in WAter DESalination (NAWADES)

Start date: Oct 1, 2012, End date: Sep 30, 2016,

"The main objective of the NAWADES project is to study, design, produce, and test new water desalination filter technology from four points of view:1. the structure of multi-layer membrane filter, including UV light distributed by glass fibers inside the membrane stack2. the materials used to build the filter, including fouling and scaling monitoring3. the coating ...
Read Project

 11

 FINISHED 

Rare Earth Magnet Recovery for Environmental and Resource Protection (REMANENCE)

Start date: Jan 1, 2013, End date: Jun 30, 2016,

"The REMANENCE concept is to develop new and innovative processes for the recovery and recycling of rare earth (RE) containing neodymium iron boron magnets (NdFeB) from a range of waste electronic and electrical equipment (WEEE). Advanced sensing and mechanical separation techniques combined with innovative processes based on hydrogen decrepitation will recover the rare earth magnets in the WEEE. ...
Read Project

 11

 FINISHED 

GReener Aeronautics International Networking-2 (GRAIN 2)

Start date: Oct 1, 2013, End date: May 31, 2016,

As mentioned in the Executive Summary of the Strategic Research & Innovation Agenda, Aviation has an important role to play in reducing greenhouse gas emissions as well as noise and local air quality issues. The continuous increase of air passenger transport generates an increasing use of hydrocarbon fuel with excessive emission of CO2 and NOX (greenhouse gases, pollutants and noise). It is well k ...
Read Project

 25

 FINISHED 

Electrochemical WAter treatment system in the dairy industry with hydroGEN REcovery and electricity production (REWAGEN)

Start date: Jun 1, 2012, End date: May 31, 2016,

The aim of the project is the development of a prototype of a water treatment system -based on the sequential combination of three technologies: electrocoagulation, electrooxidation and a technology for the recovery of generated hydrogen for energy saving and the reutilization of the resulting regenerated water for different applications - more efficient in terms of wastewater treatment and self-s ...
Read Project

 11

 FINISHED 

Devices for Neurocontrol and Neurorehabilitation (DENECOR)

Start date: Jun 1, 2013, End date: Mar 31, 2016,

The primary aim of DeNeCor is to resolve this top issue such that electronic neuromodulation therapy becomes mainstream and full market potential can be obtained. We will increase acceptance by neurologists by demonstrating designed co-existency between therapy devices and diagnostic systems. The second aim of DeNeCor is to extrapolate the ‘bilateral’ agreements between AIMD and MRI manufactures i ...
Read Project

 22