Search for European Projects

15 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Lupinus mutabilis for Increased Biomass from marginal lands and value for BIOrefineries (LIBBIO)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

The Andes Lupin (Lupinus mutabilis, tarwi) grows excellently in marginal lands due to it´s excellent foraging characteristics having the ability to fix nitrogen, mobilise soil phosphate and have low nutritional requirements for cultivation. For the increased biomass needed in Europe in coming years and decades we cannot rely on the most fertile lands, which is currently allocated to food productio...
Read Project

 14

 FINISHED 

Creative Regions for Innovation, Skills, Technology, Accessibility and Learning.

Start date: Sep 1, 2015, End date: Aug 31, 2018,

To tackle the common problem of marginalization in rural regions in Europe and to address the need of those societies for a highly skilled, competent and flexible workforce, guaranteeing social inclusion, sustainable use of regional resources and environmental protection, the CRISTAL project (Creative Regions for Innovation, Skills, Technology, Accessibility and Learning) represents a new and exci...
Read Project

 6

 FINISHED 

Meet up with the future

Start date: Sep 1, 2016, End date: Aug 31, 2018,

The project “Meet up with the future” can be divided into two themes; Addressing basic skills through more effective teaching methods. Integration of ICT and integration of literacy and creative writing, using technology and devices in the classroom. Reading among children today is of grate concern, they read less and less, they spend a lot of time in front of their computers but not using the ...
Read Project

 6

 FINISHED 

Innovation and Commercialisation in the NMP thematic area (INCOMERA)

Start date: Jan 15, 2014, End date: Jan 14, 2018,

Towards Europe 2020, European Commission adopted a comprehensive innovation strategy to enhance Europe's capacity to deliver smart, sustainable and inclusive growth. This strategy concerns the so called concept of Smart Specialization Strategy.By itself, sounds a challenging task, but it is of crucial importance, especially for less advanced regions. According to this concept, each region must set...
Read Project

 23

 FINISHED 

Establishing services enhancing the innovation management capacity of SME's in the EnterpriseEurope Network (ICEKAM-2)

Start date: Jan 1, 2015, End date: Dec 31, 2016,

Main task is to establish the services “Enhancing the innovation management capacity of SMEs” within the Enterprise Europe Network with the intention to enhance SME’s potential in a successful result of their participation in The SME instruments project and to assist particularly promising SMEs in enhancing their innovation management capacities.The services are aimed at SMEs in Iceland with a gre...
Read Project

 1

 FINISHED 

International Nordic Entrepreneurship

Start date: Sep 1, 2014, End date: Aug 31, 2016,

The project is meant to focus on main goals of the Copenhagen Process, to improve vocational education popularity and quality, to develop, take in use common learning tools and to strengthen mutual learning. The main goal of all Partners in the project is to establish one stronger and closer connection better School and the World of Work. The Partnership consist of 8 partners from 4 Nordic count...
Read Project

 8

 FINISHED 

Intelligent Motion Analysis - Development of a novel technology that makes quantitative measurement of musculoskeletal problems available, in the interests of physiotherapists, patients and society (IMA)

Start date: Oct 1, 2012, End date: May 31, 2016,

This project will provide a more accurate and low cost tool for quantitative measurement of musculoskeletal conditions, one of the most widespread and costly illnesses in society today. It will provide physiotherapists with wireless, light and easy to use measuring units that will enable them to organize their time better and perform more accurate diagnosis, providing faster diagnosis and treatmen...
Read Project

 11

 FINISHED 

Establishing services enhancing the innovation management capacity of SME's in the Enterprise Europe Network (ICEKAM)

Start date: Aug 1, 2014, End date: Dec 31, 2014,

Main task is to establish the services “Enhancing the innovation management capacity of SMEs” within the Enterprise Europe Network with the intention to enhance SME’s potential in a successful result of their participation in The SME instruments project and to assist particularly promising SMEs in enhancing their innovation management capacities. The services are aimed at SMEs in Iceland with a gr...
Read Project

 1

 FINISHED 

Intelligent Services for Energy-Efficient Design and Life Cycle Simulation (ISES)

Start date: Dec 1, 2011, End date: Nov 30, 2014,

The objective of ISES is to develop ICT building blocks to integrate, complement and empower existing tools for design and operation management to a Virtual Energy Lab (VEL). This will allow evaluating, simulating and optimizing the energy efficiency of products for built facilities and facility components in variations of real life scenarios before their realization, acknowledging the stochastic ...
Read Project

 10

 FINISHED 

An Universal Flexible Low-cost Plumbing and Heating pipe system fully Environment-compatible by using innovative Nanoparticle technology (NanoFlex)

Start date: Nov 1, 2010, End date: Oct 31, 2013,

The building and construction community in Europe includes about 150000 plumbing, heating, ventilation, air conditioning contractor SMEs with 1.2 million employees generating a total turnover of €130Bn. Our community faces the challenges of meeting the growing demand for plastic pipes and the EU Landfill Directive and the revised EU Waste Framework Directive. The polluter-pays principle says that ...
Read Project

 16

 FINISHED 

Monoblock Acetabular cup with Trabecular-like Coating (MATCh)

Start date: Oct 1, 2011, End date: Sep 30, 2013,

The project aim is to enhance the research and innovation of three SMEs working in different sectors namely glass production, coatings fabrication and software on demand. These SMEs will commercially exploit the project findings on osteoinductive coatings and scaffolds. Without this project the 3 SMEs would not be in a position to provide into this market area.One person out of 150 people reading ...
Read Project

 7

 FINISHED 

An innovative low-cost and flexible 3D scanning system (NavOScan)

Start date: Nov 1, 2010, End date: Jul 31, 2013,

The three-dimensional optical measurement of objects and surfaces is a state of the art technology in many industries like the automotive or medical sector. It is used for the reverse engineering process, the quality management and new fields of application like inspection and accelerated development process. The total cost of such a system ranges from 25T€ to 200T€ making it almost not affordable...
Read Project

 9

 FINISHED 

OPTICAST: Production of two phase low cost functional gradient recyclable wear resistant Cast Iron products (Opticast)

Start date: Aug 1, 2011, End date: Jul 31, 2013,

This project will provide a more efficient and environmentally friendly method to produce wear resistant cast iron products which are hard only in strategic locations and softer and more machinable elsewhere, creating a more flexible product in a one step process. This will contribute greatly towards the increased competitiveness in a wide range of European SMEs in a wide scope of industries, thro...
Read Project

 6

 FINISHED 

Microwave Drying for the Rapid Remediation of Flooded Buildings (MICRODRY)

Start date: Jan 1, 2010, End date: Mar 31, 2012,

Our idea is to develop microwave technology which will reduce drying times in buildings after flooding events. A single Microdry unit will run off mains electricity be capable of drying a room in just 10% of the time taken by current technologies. We will develop an intelligent control system that will measure the reflected microwaves to determine residual moisture content and adjust the power out...
Read Project

 8

 FINISHED 

Pre-cast Concrete Pile Monitoring from Manufacture to after Installation (PILE-MON)

Start date: Sep 1, 2008, End date: Feb 28, 2011,

Concrete piles are being used extensively in the civil construction industry, but there are a lot of issues to be addressed in the integrity testing of these piles. The most commonly used concrete piles are the pre-cast concrete piles and the cast in-situ concrete piles. Cast in-situ concrete piles are limited in the length or depth at which it could be cast unlike pre-cast piles (it can be extend...
Read Project

 7